Tools

This press is the backbone of any modern shop. Bearing related work is becoming more and more common on modern bikes and no shop, professional or amature should pass over these tools. The Modular bearing press starts with the press head. Where most manufactures just have a glorified nut we went further by adding a massive thrust bearing. Not a wimpy little plastic washer either, an actual bearing with balls and races. What this means is that the pressing action is almost completely isolated from the torque, creating a super smooth pressing action that requires noticeably less effort. The Team Issue press ditches the handles in favor of our signature finger spline grip pattern. For those times when things are fitting a little too tight and you don't have the means to correct it, there is a 6mm hex in the top so you can use an allen key for a little extra leverage. We use a 1/2" acme thread for our press shaft, which means a more robust thread and less turning due to it's coarser thread. It also means we have a single diameter to work with and can size our drifts to this dimension, this means your bearings are more likely to go in straight. At the other end of the press is our new Quick Nut. This simple part allows you to slide the nut over the press shaft to the desired location and then click it into place and press away. No endless turning, no pinch hazard and no wasted time. Be aware, the quick nut does require a few uses to fully break in.

The Team Issue Press keeps the Quick Nut from the big press, a sweet little nut that allows you to slide it on and then click it into place on the thread. Way faster, no pinch hazard and secure.

Kit includes a complete handless press head, 12" press shaft, quick nut and the following drifts:
Made in Bend Oregon.

PF30/1.125" headset

24mm bottom bracket drifts, for shimano compatible bottom brackets

22mm bottom bracket drift, single drift for non drive GXP bottom bracket

28.9mm bottom bracket drift, for SRAM DUB

6806 drift for BB30 bottom brackets

1.5" headset drift

centering cone

Additional drifts are on the bearing page and longer press shafts along with service parts are available on the parts page.

We always recommend installing bearings one at a time to ensure they go in straight and don't damage the bearings, components or the tools. Use the centering cone in the empty side of the hub/frame/linkage to keep the press concentric with the bore.

This fairly specialized tool, designed for the traveling mechanic, is part of our Team Issue line. However, anyone who has used, currently uses, or is thinking about using a hammer in the future will appreciate this beauty.

Coming in at roughly 249 grams(+/-) it's a big weight savings over more traditional hammers. The soft face is replaceable with commonly available 1" threaded faces. At 12" long, it's compact but still long enough to remove those stubborn bearings. We finish off the Team Issue hammer with a custom silicone grip from ESI to give a bit of cushion from the all-metal construction.

Made in Bend, Oregon, with USA sourced grip and soft face.

Abbey selected the best tools from the hand tool industry to compliment our top shelf bike tools. These are tools that professionals have relied on for years. We use many of them in the tool shop and Abbey Evangelists have used them in their service departments and race pits for decades.

Start with a Pelican case with subtle graphics on the shell with the custom touch of an engraved name tag in signature Abbey Green. Next are 3 layers of Kaizen Foam custom cut to keep the included tools organized, safe and secure. Abbey even included a small parts box for all your little items. The bottom layer gives you a couple options, you can use the large cutouts to store a bleed kit, lube, thread retainers or you can use the included foam to further customize the kit to build your perfect toolbox.

Included in this kit:

Abbey Bike Tools:

Crombie - Dual Sided TA
Whip-it for Dual Sided
HAG
Decade Chain Tool
Titanium Hammer
Wash Buddy, Complete
Team Issue Pedal Wrench
Crank Preload Tool
4 Way (2.5-3-4-5)
4 Way (T10-T15-T20-T25)
Stu Stick

Knipex:

Diagonal Flush Cutters
Pliers Wrench
Cable Cutter
Needle Nose

WERA:

9 piece Hex Plus Set With Ball End
1mm flat blade Screw Driver
#2 Phillips Screw Driver
9pcs Ball End Torx Set
2.0mm Hex Plus Driver
3.0mm Hex Plus Driver

Other:

Pelican case M2200
Pelican 1920 Flashlight
Klein Scissors
Plano Box
Starrett Tape Measure in/cm

With many pedal manufactures going away from the 15mm wrench flats the traditional pedal wrench is becoming obsolete. To further complicate things some manufactures require both 6 and 8 millimeter within their product range. This means it's hard to know exactly what tool to grab for pedal removal or installation. Enter the Abbey BBQ pedal wrench. With the once standard 15mm box end on one end and a custom 6 and 8 millimeter hex swivel bit on the opposite end it's the only pedal wrench you'll ever need. Perfect to keep at the fit station, on the sales floor, on top of the pedal box in the neutral car and certainly at the tool bench.

The Team Issue pedal wrench is something that we have been custom making for our sponsored mechanics for a few years. Now they are available in limited quantities to the tool buying public. These tools have five big pockets of material removed to drop the weight from 434 grams to 286! This turns it into a great travel tool for cyclists or mechanics that don't want to sacrifice usability for weight savings. While we are confident this tool has great durability in normal conditions it is not recommended for seized or abused equipment.

Made in Bend Oregon.

SHAFT ONLY

The wash buddy clamps firmly into the rear drop out and has the ability to not only hold the chain but allow for full crank rotation and changing of cogs. This allows you plenty of room to clean and inspect your drive train while washing your bike or doing maintenance.

We tested these for over 2 years on the pro circuit to ensure you will have a durable tool for years to come. The stainless spindle will hold up to all of the solvents, water and grit that these tools get soaked in every time you use them. The Delrin pulley has great solvent resistance as well.

Our Delrin pulleys are available separately for use with thru axle bikes. Simply remove your wheel and slide the pulley over your factory thru axle for a nice secure solution. It's a great way to ship bikes as well.

Made in Bend Oregon.

Now we don't pretend to understand how magnets work but they're kind of handy for keeping the chain wrapped around the cassette and keeping the chain chain stowed when not in use. So we are offering these as parts for the existing Whip-It.

A chain whip is a pretty simple tool, but the Whip-It maximizes function and simplicity. The Whip-It is made from a 12" length of stainless steel to give you enough leverage to loosen even the most stubborn cassettes. The Whip-it's round handle provides comfort surpassing other flat bar style chain whips on the market. The icing on the cake is that Abbey's signature tool, the Crombie(sold separately)stores inside the handle of the Whip-It! This means the two tools you use together, get stored together, and travel together, giving you less clutter in your tool box.

The Whip-It comes in two versions, one for the 1/2" handle for all Crombies that Abbey makes as of January 2020, this version also works for dual sided and team issue before January 2020. There is also a version for the older 3/8 handle single sided chain whips which were sold prior to January 2020.

Made in Bend Oregon.

We made these monster chain whips at the request of some of our long time customers who were working the world cup track circuit. When a world class sprinter stands on the pedals of their track bike it taxes everything between the sole of their shoe and the tire. This means that tiny little track cog is threaded onto the hub as if He-Man put it on. We've lengthened these track whips out to a massive 17"/432mm, made a reinforced tang specifically for the 1/8" chain and put them together with stainless aircraft rivets. It adds up to a bomber whip worthy of the fastest men and women in the world.

Not for use on multi geared bikes. Single Speed 1/8" only.

Made in Bend Oregon.

Assembly tool for Blackbearing bottom bracket 16 flute.

Assembly tool for Blackbearing bottom bracket 12 flute.

Allows disassembly and assembly of bottom brackets bearings:

24mm / 25mm / 30mm / BB86 / BB92 / BB95 / BSA24 / BSA30 / 386EVO

This stainless steel tool is used to measure the angle of the headset’s bearings

There are 4 measure points: 36° and 45° inside and 36° and 45° outside.

The Blackbearing case allows the mounting of the following bearings:

6700-2RS
688-2RS / 6800-2RS / 698-2RS / 63800-2RS / 688-2RS-E / DR-6700-2RS
608-2RS / 6801-2RS / 6001-2RS / 6902-2RS / 6702-2RS / 7801-2RS / 16100-2RS / 7902-2RS / MR-17287-2RS
MR-17286-2RS / 16001-2RS / MR-16287-2RS / MR-17289-2RS / MR-19285-2RS / 7001-2RS / 6902-2RS-E / 3001-2RS
6802-2RS / 6901-2RS / 628-2RS / 6200-2RS / 6903-2RS / 609-2RS / 7901-2RS / 3802-2RS / 63802-2RS / 7903-2RS
MR-18307-2RS / 3903-2RS
6000-2RS / 6803-2RS / 6201-2RS / 6002-2RS / 6804-2RS / 629-2RS / 63803-2RS / MR-15267-2RS / MR-12268-2RS
DR-1526-2RS / 16002-2RS / 7805-2RS / 3002-2RS / 3804-2RS
608-2RS / 6900-2RS / 6805-2RS / 6904-2RS / MR-2437-2RS / 608/9-2RS / 608-2RS-E / MR24077-2RS / MR-275377

Hex Wrench with Handle
Specifically designed for quick and easy installation and removal of cranks including the Campagnolo® Ultra-Torque.
Ergonomic dual-density screw driver handle.
Features extra long hex key and second ball-end.
Designed to stand up to the harsh conditions of professional use.
10mm crank bolts often require high torque and a special tool. Pedro's led the way with a tool up to these tasks. Our 10mm hex crank driver was specifically designed for quick-and-easy crank installation and removal including the Campagnolo® Ultra-Torque. Features include an ergonomic dual-density screw driver handle for comfort and control, an extra long hex key for exceptional leverage, a second ball end for quick and easy installation or removal, and heat-treated S2 tool steel construction for the ultimate in strength and lasting performance. Also perfect for Mavic freehub body removal. Backed by Pedro's lifetime warranty.

The 5mm hex is by far, the most common size hex found on modern bicycle. Inspired by our other hex driver sizes, which are some of the most comfortable and ergonomic hex wrenches we've ever used, Pedro's decided to bring you these features in the common 5mm size.

Perfect for the common 5mm hex hardware found on every modern bicycle.
Ergonomic dual-density screw driver handle.
Features extra long hex key and second ball-end.
Designed to stand up to the harsh conditions of professional use.
Backed by Pedro's lifetime warranty.

Pedals featuring a back-side hexagon broach are now standard on many modern bicycles in 6mm and 8mm sizes. Pedro's led the way with our 6mm hex pedal driver specifically designed for quick-and-easy pedal installation and removal.

New extra long 27cm hex key and second ball-end deliver leverage and speed.
Specifically designed for quick and easy installation and removal of pedals and cranks.
Ergonomic dual-density screw driver handle.
Designed to stand up to the harsh conditions of professional use.
Backed by Pedro's lifetime warranty.

Pedals featuring a back-side hexagon broach are now standard on many modern bicycles in 6mm and 8mm sizes. Pedro's led the way with our 8mm hex pedal/crank driver was specifically designed for quick-and-easy pedal and crank installation and removal.

New extra long 27cm hex key and second ball-end deliver leverage and speed.
Specifically designed for quick and easy installation and removal of pedals and cranks.
Ergonomic dual-density screw driver handle.
Designed to stand up to the harsh conditions of professional use.
Backed by Pedro's lifetime warranty.

Fits into grease injectors with 9/16-20 UNF threads.

This premium adjustable wrench is a great addition to any tool set.

Innovative jaw design prevents damage to fasteners and opens to 33mm.
Ergonomic, soft-plastic, TPR handle offers comfort, leverage, and easy handling.
Laser engraved sizing scale and proper usage direction arrows for simple operation.
Optimized forged chrome vanadium body provides strength and lighter weight.
10" (250mm) length provides perfect blend of leverage and portability.