Abbey Top Cap Socket 32mm
Description
Suspension service is a specialty within bicycle repair and it takes specialized tools to perform this work. One of the things that any factory tech will tell you is nice to have are sockets specifically made or altered for the low profile hex on the top of each fork leg. The lead in or chamfer on a standard socket will greatly decrease the contact between tool and part and can easily scratch or deform those nuts. For years shops have been grinding down their sockets to remove the chamfer. Problem is you're still often left with a loose fitting socket that is still prone to chewing up those delicate parts. That's why we started from scratch.
We made our sockets from billet aluminum to exacting tolerances to keep these parts in good shape. fully CNC'd machined with zero lead in, they make the specialty that is suspension service a little bit easier. They feature a 3/8" square drive for use with your favorite torque wrench as well as finger splines to help run the top caps into the fork legs with those oil soaked hands. We also kept them short (1" or 25mm for all sizes) to reduce the chance of them caming off of the top cap under torque.
Offered in a 7 individual sizes and a 6 socket set for most modern suspension forks on the market.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-2Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)Stock Level:In StockStock Level:2Stock Level:In StockStock Level:In StockStock Level:Out of StockStock Level:2Stock Level:2Stock Level:2Stock Level:1Stock Level:2Stock Level:2Stock Level:Out of StockStock Level:In StockStock Level:1Expected Date:15 December 2026Expected Date:15 December 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$20.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punchStock Level:In StockStock Level:2Stock Level:In StockStock Level:2Stock Level:In StockStock Level:2Stock Level:2Stock Level:2Stock Level:2Stock Level:In StockStock Level:2Stock Level:2Stock Level:2Stock Level:2Stock Level:1Stock Level:2Stock Level:1Stock Level:In StockStock Level:Out of StockStock Level:1Stock Level:2Stock Level:1Stock Level:In StockStock Level:2$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:EVTL-EVTSTEM
The Stem Transfer/Fork Service Tool quickly pushes down through stems/spacers/upper headset to keep everything in place when servicing headsets or replacing forks. No more using toe-straps to affix handlebars on top tubes.
Quit kinking your clients cable housing and hydraulic lines! Stop putting grooves in their handlebar tape! Why risk chipped paint, dented aluminum, and frame-destroying carbon impacts?
This tool comes with an anodized black finish, for all threadless 1 1/8 upper headset bearing assemblies.
SOLD AS A SINGLE TOOL NOT MULTIPLE AS PICTURED.Stock Level:1Stock Level:1$57.00 (RRP)Add To Cart
-
Stock Code:ABTL-TWAY-MAGONLY
BASE TOOL ONLY NO BITS.
The Abbey Bike Tools T way precision multi-tool is a great addition to the shop at home or work. This is built as a more robust multi use tool than our compact 4 way using the same durable stainless steel our Crombie heads use.
Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits from WERA that fit like a glove into the bolts on your modern bike. They won't strip out fasteners like the cheap offshore made tools that are so common in the bike world.
The next part of the multi-tool is the chassis, for this we used our favorite US drawn stainless steel alloy and built a frame to hold the bits. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or assembling your bike for a fly away trip.Stock Level:In StockStock Level:In Stock$125.00 (RRP)Add To Cart
-
Stock Code:PDTL6462126
Precision laser cut design with ergonomic cushioned TPR grip and 3/8" drive for use with torque wrenches.
Superior material and optimized heat treatment outlast the competition.Stock Level:1Stock Level:1$33.00 (RRP)Add To Cart