Seat Post Clamp
-
Stock Code:CKSP-JAABY
Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"
Specifications
- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty
Installation
- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.$89.00 (RRP) -
Stock Code:CKSP-JABFStock Code:CKSP-JBBFStock Code:CKSP-JCBFStock Code:CKSP-JDBF
Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"
Specifications
- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty
Installation
- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.Expected Date:27 June 2025Expected Date:27 June 2025$89.00 (RRP)$89.00 (RRP)$89.00 (RRP)$89.00 (RRP) -
Stock Code:CKSP-JAB1Stock Code:CKSP-JBB1Stock Code:CKSP-JCB1Stock Code:CKSP-JDB1
Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"
Specifications
- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty
Installation
- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.$76.00 (RRP)$76.00 (RRP)$76.00 (RRP)$76.00 (RRP) -
Stock Code:CKSP-JAY1Stock Code:CKSP-JBY1Stock Code:CKSP-JCY1Stock Code:CKSP-JDY1
Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"
Specifications
- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty
Installation
- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.Expected Date:27 June 2025$76.00 (RRP)$76.00 (RRP)$76.00 (RRP)$76.00 (RRP) -
Stock Code:CKSP-JAB2Stock Code:CKSP-JBB2Stock Code:CKSP-JCB2Stock Code:CKSP-JDB2
Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"
Specifications
- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty
Installation
- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.$76.00 (RRP)$76.00 (RRP)$76.00 (RRP)$76.00 (RRP) -
Stock Code:CKSP-JAM2Stock Code:CKSP-JBM2Stock Code:CKSP-JCM2Stock Code:CKSP-JDM2
Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"
Specifications
- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty
Installation
- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.$76.00 (RRP)$76.00 (RRP)$76.00 (RRP)$76.00 (RRP) -
Stock Code:CKSP-JAZ2Stock Code:CKSP-JBZ2Stock Code:CKSP-JCZ2Stock Code:CKSP-JDZ2
Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"
Specifications
- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty
Installation
- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.Expected Date:27 June 2025$76.00 (RRP)$76.00 (RRP)$76.00 (RRP)$76.00 (RRP) -
Stock Code:CKSP-JAR1Stock Code:CKSP-JBR1Stock Code:CKSP-JCR1Stock Code:CKSP-JDR1
Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"
Specifications
- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty
Installation
- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.Expected Date:27 June 2025Expected Date:27 June 2025$76.00 (RRP)$76.00 (RRP)$76.00 (RRP)$76.00 (RRP) -
Stock Code:CKSP-JAS1Stock Code:CKSP-JBS1Stock Code:CKSP-JCS1Stock Code:CKSP-JDS1
Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"
Specifications
- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty
Installation
- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.Expected Date:27 June 2025$76.00 (RRP)$76.00 (RRP)$76.00 (RRP)$76.00 (RRP) -
Stock Code:CKSP-JAT2Stock Code:CKSP-JBT2Stock Code:CKSP-JCT2Stock Code:CKSP-JDT2
Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"
Specifications
- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty
Installation
- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.Expected Date:27 June 2025Expected Date:27 June 2025$76.00 (RRP)$76.00 (RRP)$76.00 (RRP)$76.00 (RRP) -
Stock Code:CKSP-JAP1Stock Code:CKSP-JBP1Stock Code:CKSP-JCP1Stock Code:CKSP-JDP1
Why Chris King Made This – "Symmetry is a key component of sound design. King riders have, for years, paired our headsets with our bottom brackets and hubs, to provide a few, classy pops of colour to their bikes. But that left them with no off-setting visual cue at the top of the bike to make the look more symmetrical. If this strikes you as a goofy way to think about your bike, fair enough, but it’s one of those things that bothered our eyes a little, and enough riders asked us to make a seat collar that we went ahead and designed one"
Specifications
- Aluminum collar with stainless steel bolt, washer, and barrel nut
- Available in 10 colors to match King components
- Available in four sizes: 30.0, 31.8, 34.9, 36.4
- Made in the USA
- Lifetime Warranty
Installation
- Please measure the seat tube of your frame to ensure proper fitment before ordering. Each nominal size is intended to fit a seat tube +/- 0.5mm (for example a 30.0 Seatpost Collar should fit a seat tube OD of 29.5mm up to 30.5mm).
- We recommend applying a small amount of anti-seize compound to the inside of the Seatpost Collar when installing on aluminum, steel, or titanium frames.
- Maximum Torque is 6nm.
- Clamp Height 15.88mm and Clamp Height to Inner Lip 14.35mm
- The bolt and barrel nut of each King Seatpost Collar comes with a small amount of anti-seize compound applied to the threads. You may need to reapply anti-seize to those threads after washing or disassembling your Seatpost Collar.Expected Date:27 June 2025$76.00 (RRP)$76.00 (RRP)$76.00 (RRP)$76.00 (RRP) -
Stock Code:PCSK-195BKORStock Code:PCSK-195BLACKStock Code:PCSK-195POLISHStock Code:PCSK-195PUBKStock Code:PCSK-195PWBKStock Code:PCSK-195SILORStock Code:PCSK-195SILVERStock Code:PCSK-196BKORStock Code:PCSK-196BLACKStock Code:PCSK-196POLISHStock Code:PCSK-196PUBKStock Code:PCSK-196PWBKStock Code:PCSK-196SILORStock Code:PCSK-196SILVERStock Code:PCSK-198BKORStock Code:PCSK-198BLACKStock Code:PCSK-198POLISHStock Code:PCSK-198PUBKStock Code:PCSK-198PWBKStock Code:PCSK-198SILORStock Code:PCSK-198SILVERStock Code:PCSK-197BKORStock Code:PCSK-197BLACKStock Code:PCSK-197POLISHStock Code:PCSK-197PUBKStock Code:PCSK-197PWBKStock Code:PCSK-197SILORStock Code:PCSK-197SILVER
A super-strong, functional, classy Quick-Release Seat Post Collar, machined from scratch in sunny Chico, California.
These are lovingly machined out of USA sourced aluminum and stainless steel.$244.00 (RRP)$244.00 (RRP)$310.00 (RRP)$244.00 (RRP)$244.00 (RRP)$244.00 (RRP)$244.00 (RRP)$244.00 (RRP)$244.00 (RRP)$244.00 (RRP)$244.00 (RRP)$244.00 (RRP)$244.00 (RRP)$244.00 (RRP)$244.00 (RRP)$244.00 (RRP)$310.00 (RRP)$244.00 (RRP)$244.00 (RRP)$244.00 (RRP)$244.00 (RRP)$244.00 (RRP)$244.00 (RRP)$310.00 (RRP)$244.00 (RRP)$244.00 (RRP)$244.00 (RRP)$244.00 (RRP) -
Stock Code:PSSK-ST0686
Our Seatpost Clamps with rack mounts provide a stable spot to mount your rear rack stays to on bikes without seatstay braze-ons. Very handy.
- Alloy clamp
- Stainless steel bolt
- Threaded to accept standard M5 bolts$22.75 (RRP)POA -
Stock Code:SASK-ST8040
The Salsa Seatpost Clamp Flip-Lock allows straightforward saddle height adjustment with the flick of a lever.
- Machined 6061-AL with stainless steel pivot and bolt
- Anodized with laser-etched logo
- Integrated Flip-Off lever
- For smooth operation, lightly grease the bolt threads and keep all parts cleanPOA -
Stock Code:SASK-ST8015
The Salsa Seatpost Clamp Flip-Lock allows straightforward saddle height adjustment with the flick of a lever.
Machined 6061-AL with stainless steel pivot and bolt
Anodized with laser-etched logo
Integrated Flip-Off lever
For smooth operation, lightly grease the bolt threads and keep all parts clean$91.46 (RRP)POA -
Stock Code:SASK-ST8050
Lip-Locks secure your seatpost and add functional bling to your ride.
- Non-quick release version of the Flip-Lock
- Machined 6061-AL with stainless steel pivot and bolt
- Anodized with laser-etched logo
- For smooth operation, lightly grease the bolt threads$49.44 (RRP)POA -
Stock Code:SASK-ST6146
Lip-Locks secure your seatpost and add functional bling to your ride.
- Non-quick release version of the Flip-Lock
- Machined 6061-AL with stainless steel pivot and bolt
- Anodized with laser-etched logo
- 30.0 clamp for most Salsa steel frames
- For smooth operation, lightly grease the bolt threads$49.44 (RRP)POA -
Stock Code:SASK-ST6153
Lip-Locks secure your seatpost and add functional bling to your ride.
Non-quick release version of the Flip-Lock
Machined 6061-AL with stainless steel pivot and bolt
Anodized with laser-etched logo
30.0 clamp for most Salsa steel frames
For smooth operation, lightly grease the bolt threads$49.44 (RRP)POA -
Stock Code:SASK-ST8064
Lip-Locks secure your seatpost and add functional bling to your ride. Available in a variety of sizes and color choices.
Non-quick release version of the Flip-Lock
Machined 6061-AL with stainless steel pivot and bolt
Anodized with laser-etched logo
30.0 clamp for most Salsa steel frames
For smooth operation, lightly grease the bolt threads$49.44 (RRP)POA -
Stock Code:SASK-ST2018
Post-Lock is a rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. Post-Locks do not have a lip like our Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp.
This is not a seat collar and cannot be used to keep your seatpost in place
Not for use with carbon fiber seatposts
Please consult your seatpost manufacturer to check compatibility
Max torque 3 - 5 N-m
6061-AL
34mm-wide rack mount threaded for M5 bolts$74.16 (RRP)POA -
Stock Code:SASK-ST2019
Post-Lock is a rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. Post-Locks do not have a lip like our Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp.
- This is not a seat collar and cannot be used to keep your seatpost in place
- Not for use with carbon fiber seatposts
- Please consult your seatpost manufacturer to check compatibility
- Max torque 3 - 5 N-m
- 6061-AL
- 34mm-wide rack mount threaded for M5 boltsPOA -
Stock Code:SASK-ST2020
Post-Lock is a rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. Post-Locks do not have a lip like our Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp.
This is not a seat collar and cannot be used to keep your seatpost in place
Not for use with carbon fiber seatposts
Please consult your seatpost manufacturer to check compatibility
Max torque 3 - 5 N-m
6061-AL
34mm-wide rack mount threaded for M5 bolts$74.16 (RRP)POA -
Stock Code:SKSP-ST2014
Rack-Locks keep your seatpost in place and provide a mounting position for the front struts of a rack.
34mm-wide rack mount threaded for M5 bolts
Machined 6061-AL with stainless steel pivot and bolt
Anodized with laser-etched logo
For smooth operation, lightly grease the bolt threads$74.16 (RRP)POA -
Stock Code:SASK-ST2015
Rack-Locks keep your seatpost in place and provide a mounting position for the front struts of a rack.
34mm-wide rack mount threaded for M5 bolts
Machined 6061-AL with stainless steel pivot and bolt
Anodized with laser-etched logo
For smooth operation, lightly grease the bolt threads$74.16 (RRP)POA
