Derailleurs
-
Stock Code:SMDR53102
Old road frames with a braze-on derailleur mount were designed for large road rings. They aren't compatible with sub-compact chainrings
This adapter for the frame front derailleur braze-on allows you to mount your derailleur lower to get it to work with smaller chainrings.$75.95 (RRP)Add To Cart
-
Stock Code:IDDR73238
Quick release downtube cable housing stops allow you to easily lubricate shift housing without unbolting them from the frame. Machined barrel adjusters offer precise, ergonomic adjustments on the stand or on the road. Mounts to downtube shifter bosses. Sold as a pair.
$42.75 (RRP)Add To Cart
-
Stock Code:PSDR-DP0910Stock Code:PSDR-DP0911Stock Code:PSDR-DP0920Stock Code:PSDR-DP0921Stock Code:PSDR-DP0930Stock Code:PSDR-DP0931POAPOAPOAPOAPOAPOA
-
Stock Code:PSDR-FS0911Stock Code:PSDR-FS0913Stock Code:PSDR-FS0915
Available in 28.6, 31.8 & 34.9mm. Clamp with pulley mounts to the seat tube to make top-routed cables compatible with bottom-pull road derailleurs
POAPOAPOA -
Stock Code:PSDR-FS1328Stock Code:PSDR-FS1327Stock Code:PSDR-FS1322Stock Code:PSDR-FS1325
Direct Mount Adapter for 100mm BBs 2X Drivetrains
· Works for Shimano and SRAM High Direct Mount front derailleurs
· 34.9mm clamp with shims for 31.8 & 28.6
· 43.5mm offset for mountain double cranksets$97.55 (RRP)POAPOAPOAPOA -
Stock Code:PSDR-LD0900
Are you regretting your singlespeed purchase? Or do you have a set of 9-speed downtube shifters you’ve been dying to use but nowhere to put ‘em? Well, here’s your huckleberry. Our clamp-on Downtube Shifter Mounts fit onto your, well, downtube and they have mounts for, well, shifters.
- For Shimano-style downtube shifters
- 31.8mm clamp with shims for 28.6mm tubes$82.96 (RRP)POA -
Stock Code:PSDR-FS0069
Problem Solvers Downtube Housing Housing Stops with Barrel Adjusters Stainless
· Braze-on downtube adjusters for road shifters
· Stainless steelPOA -
Stock Code:PSDR-FS0900
Downtube Shifter Boss Covers Siver ( pair)
These boys cover up the downtube shifter bosses on your singlespeed/fixie conversions, protecting the bosses from grit and grime and look good doing it. Bolts not included$48.26 (RRP)POA -
Stock Code:SADH-FD1800
Front Derailleur Mounts for specific Salsa frame models
- Derailleur Mount Required for Direct Mount Front Derailleurs
- Replacement part for Cutthroat v2 frames
- Enables installation of a braze-on front derailleur
- Offset for 148mm rear hub spacingPOA
