Stem

Same as the original MX-2, recreated by Nitto in Japan.
22.2mm clamp size
21.0mm shaft diameter
Aluminium head
Chrome moly shaft
575g

Designed to suit old school BMX bikes. RAD!

Nitto NTC225 Quill stem




























100mm x 25.4mm
with 225mm shaft

Old school high quality stem. Quill stems aren't endagered species in the cycling kingdom. It has worked since the beginning of cycling and theres a reason behind it----IT WORKS.


















¦FORGED ALUMINUM
¦BAR CLAMP- 25.4
¦POST DIAM- 22.2
¦POST LENGTH- 280mm
¦ANGLE- 71°
¦WEIGHT- 375~425g

COLOR- SILVER ANODIZED

3-D forging gives this 6061-T6 aluminum stem excellent strength-to-weight ratio. A smart value, too.

- Attractive buffed surface
- 3-D forged 6061 aluminum
- +7/-7° or +25/-25° rise
- 25.4mm 4-bolt bar clamp
- 1-1/8” steerer clamp w/shim for 1” steerers. 45mm stack ht.
- 149 grams (80mm)

Soma Sutro Quill Stem:

- Cold forged aluminum
- Polished finish in silver or black
- 180mm tall quill gives you a little extra height over standard quill stems
- Bar Clamp: 26.0mm
- Weight: 320g

Thomson Stem Top Cap

The Thomson BMX stem is machined from 7000 series aluminum. The stem is one-piece design with no welds or joints.

The 50mm wide clamp length and patented undercut around the handlebar combine to grip the handlebar more securely. Thomson’s “two clamps in one” design provides a stiff ride with minimal flexing or squeaking.

Lightweight, the BMX Stem weighs 255 grams.

Built in spacer on stem body clears gyro and eliminates the need for a separate loose spacer

The Thomson X2 features a lighter, 2-bolt handlebar clamp. The interlocking handlebar clamp of the X2 makes is as torsionally strong as other 4-bolt designs, while being lighter and narrower. X2 has a low 36mm stack height. X2 is available in 2 rise options; 10 and 17 degree. Both the 10 and 17 degree stem can be run with a positive or negative rise, and the reversible graphics will be right either direction. 10 degree stems work well for average riders/amateur racers, while those who want a very aggressive aero position or who want a very upright position can use the 17 degree stem to meet their fit needs.

Weight 135grams (90mm)

The X4 is absolutely the best combination of strength and weight available. Enduro and downhill riders can run Thomson confidently, yet X4 is light enough for cross country and cyclocross. X4 offers precise steering and tracking for the ultimate in control while riding. 40-60mm stems are available in block style only.

The X4 is absolutely the best combination of strength and weight available. Enduro and downhill riders can run Thomson confidently, yet X4 is light enough for cross country and cyclocross. X4 offers precise steering and tracking for the ultimate in control while riding. 40-60mm stems are available in block style only.

Spacer Kit for an 1 1/8th steerer. Comes with (1)ea 5mm (4g), 10mm (8g) and 20mm (13g) spacer

Thomson Stem Spare Parts

Thomson stem Shim 1-1/8" to 1" 39-40mm

SM-A002 is a 1” to 1 1/8” shim that is 40mm tall. This shim is originally made for the 25.4 and 26.0 Elite stems. It is too tall to be used with X4 or X2 without putting spacers on top of the stem.

Thomson X4 31.8 Face Plate Black

Direct Mount Stems allow riders the ultimate in stiffness for dual crown cockpits. The strongest stem we make, which means it’s the strongest stem you can get. Built for any fork using the BoXXer® bolt pattern including: Rock Shox Boxxer, Fox F40, Manitou Dorado and Marzocchi (2012 forward).

Motorcycle Style, Thomson Strength and attention to detail.

Our 40mm Direct Mount has 30 degrees of rise.

65mm Wide handlebar clamp width for maximum torsional stiffness, which translates into better steering precision.