Abbey T Way Tool No Bits
Description
BASE TOOL ONLY NO BITS.
The Abbey Bike Tools T way precision multi-tool is a great addition to the shop at home or work. This is built as a more robust multi use tool than our compact 4 way using the same durable stainless steel our Crombie heads use.
Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits from WERA that fit like a glove into the bolts on your modern bike. They won't strip out fasteners like the cheap offshore made tools that are so common in the bike world.
The next part of the multi-tool is the chassis, for this we used our favorite US drawn stainless steel alloy and built a frame to hold the bits. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or assembling your bike for a fly away trip.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-2Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)Expected Date:15 December 2026Expected Date:15 December 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$20.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:ABTLFrm-Std-BrgRmvl-St
When cartridge bearings became common in bicycles in the mid 90's they didn't come with tools to service them. It feels like for at least a decade we were installing bearings with a random socket that was close to the right size and removing them with a hammer and a punch. Over the years tools have gotten better and now we have another big step forward in bearing removal.
The removers use an expanding cone that goes behind the bearing and allows you to remove it while tightening the nut. This pulls the bearing into the black cup smoothly with minimal effort. No hammers, no punches, most importantly no damage to your parts. Be sure to watch our shop video to learn how to use this tool properly.
Compatible with bearing Inside Diameters (ID) from 12 to 20 millimeters.
Compatible with Bearing Outside Diameters from 24 to 37 millimeters.
Commonly used for hubs and suspension linkage bearings.
These removers started life as a Noble Tools item and when they closed down in 2023 we acquired the design and putting them back into production. The design is unchanged and parts are backwards compatible with tools made by Noble.
Designed by Noble Tools, London England. Made in Bend Oregon, USA$540.00 (RRP)Add To Cart
-
Stock Code:ABTLABTSHPLOAD
These gems are machined to precisely fit the preload adjuster cap on all modern 24mm spindle Shimano cranks. The finger spline offers good leverage to install, remove or adjust the preload cap. We also added a 6mm hex in the center should you need a little extra leverage that a hex key provides.
These are also compatible with our fit kits and with the addition of the 8mm or 10mm saddle height bullets for a more accurate measurement of saddle height.
*8mm and 10mm Saddle Height Bullets sold separately
Made in Bend Oregon.$51.00 (RRP)Add To Cart
-
Stock Code:ABTL-WSHBDDY-V1
The wash buddy clamps firmly into the rear drop out and has the ability to not only hold the chain but allow for full crank rotation and changing of cogs. This allows you plenty of room to clean and inspect your drive train while washing your bike or doing maintenance.
We tested these for over 2 years on the pro circuit to ensure you will have a durable tool for years to come. The stainless spindle will hold up to all of the solvents, water and grit that these tools get soaked in every time you use them. The Delrin pulley has great solvent resistance as well.
Our Delrin pulleys are available separately for use with thru axle bikes. Simply remove your wheel and slide the pulley over your factory thru axle for a nice secure solution. It's a great way to ship bikes as well.
Made in Bend Oregon.$114.00 (RRP)Add To Cart
-
Stock Code:PDTL6462124
Precision laser cut design with ergonomic cushioned TPR grip and 3/8" drive for use with torque wrenches.
Superior material and optimized heat treatment outlast the competition.$33.00 (RRP)Add To Cart
