Pedros Pro Cone Wrench - 24mm
Description
Precision laser cut design with ergonomic cushioned TPR grip and 3/8" drive for use with torque wrenches.
Superior material and optimized heat treatment outlast the competition.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-E-BIKESOCKET05Stock Code:WMTL-E-BIKESOCKET03Stock Code:WMTL-E-BIKESOCKET02Stock Code:WMTL-E-BIKESOCKET06Stock Code:WMTL-E-BIKESOCKET01Stock Code:WMTL-E-BIKESOCKET04Stock Code:WMTL-E-BIKESOCKET10Stock Code:WMTL-E-BIKESOCKET09Stock Code:WMTL-E-BIKESOCKET07Stock Code:WMTL-E-BIKESOCKET11Stock Code:WMTL-E-BIKESOCKET08
Compatible with 60mm Gen 1 Bosch Lockring.
Designed to save the mechanic time and money, our new e-bike lockring sockets are machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. • Precision machined aluminum body • Anodized in Wheels MFG red.Expected Date:02 November 2026$72.00 (RRP)$81.00 (RRP)$81.00 (RRP)$81.00 (RRP)$96.00 (RRP)$100.00 (RRP)$81.00 (RRP)$52.00 (RRP)$72.00 (RRP)$81.00 (RRP)$72.00 (RRP) -
Stock Code:WMTL-BP0003
This drift and over axle set is used to install common-sized thru-axle hub and frame sealed bearings.
Compatible with the 3/8 Wheels Mfg. BP0001, BP0005, Press 1 handles and rod.
Originally Driftset-Hub1 - Press-3
Contains the following Open Bore Drift sizes:
(2) 6802 Open Bore
(2) 6803 Open Bore
(2) 6804 Open Bore
(2) 6901 Open Bore
(2) 6902 Open Bore
(2) 6903 Open Bore
(2) 15x26 Open Bore
(2) 27.5x37 Open Bore
Contains the following Over Axle Drift sizes:
(2) 6802Over Axle
(2) 6803 Over Axle,
(2) 6804 Over Axle,
(2) 6901 Over Axle
(2) 6902 Over Axle,
(2) 6903 Over Axle,
Contains the following speed spacers:
(2) Frame Linkage Standoff 20
(2) Frame Linkage Standoff 30
(2) Speed Spacer 30mm
(1) Speed Spacer 15x25
(1) Speed Spacer 15x35
(1) Speed Spacer 17x25
(1) Speed Spacer 17x35
(1) Speed Spacer 20x25
(1) Speed Spacer 20x35$305.00 (RRP)Add To Cart
-
Stock Code:ABTL-PREHAG
If you've been working on your bike for a while, you are well acquainted with the simple derailleur hanger and it's importance to your shift quality. The HAG has been a cornerstone tool in the Abbey catalog for a long time and it's accuracy is unparalleled in the industry. But what if you just want to check hanger alignment in a quick easy manner without removing your rear derailleur? Enter the 3D printed preHAG!
This simple tool is meant to quickly see if the derailleur cage is parallel to the cogs. It simply presses and flexes onto the largest cog and hangs down to give you a reference plane to judge if your bike is square with the world. This isn't meant to replace the accuracy of a HAG, just add an additional step that doesn't require any disassembly of the bike for those pre ride once overs.
Made in Bend OR
Protected under US Patent # 11,852,471.$36.00 (RRP) -
Stock Code:ABTL-STD-SOCKET-13MM
This is a 13mm socket made specifically for the bleeders on modern Fox forks. These bleeders are built just like a top cap, with minimal height of the hex drive. So it's a perfect application for our original chamferless sockets. Use these to install the fenders that mount behind the bleeders or when servicing your fork. Socket uses a 3/8" square drive
Compatibility:
Fox fork models 36,38 and 40 equipped with bleeders.
Made in Bend Oregon$52.00 (RRP)Add To Cart
-
Stock Code:ABTL-TCSOCKET-SET6
Suspension service is a specialty within bicycle repair and it takes specialized tools to perform this work. One of the things that any factory tech will tell you is nice to have are sockets specifically made or altered for the low profile hex on the top of each fork leg. The lead in or chamfer on a standard socket will greatly decrease the contact between tool and part and can easily scratch or deform those nuts. For years shops have been grinding down their sockets to remove the chamfer. Problem is you're still often left with a loose fitting socket that is still prone to chewing up those delicate parts. That's why we started from scratch.
We made our sockets from billet aluminum to exacting tolerances to keep these parts in good shape. fully CNC'd machined with zero lead in, they make the specialty that is suspension service a little bit easier. They feature a 3/8" square drive for use with your favorite torque wrench as well as finger splines to help run the top caps into the fork legs with those oil soaked hands. We also kept them short (1" or 25mm for all sizes) to reduce the chance of them caming off of the top cap under torque.
Offered in a 7 individual sizes and a 6 socket set for most modern suspension forks on the market.
Socket Set includes: 24, 26, 27, 28, 30 and 32
Made in Bend Oregon.$260.00 (RRP)
