Pedros Crowfoot Flare Wrench -7 & 8mm
Description
Use the Crowfoot Flare Wrench on any 1/4" drive torque wrench to ensure accurate torque on delicate disc brake compression fittings. A perfect add-on for our Demi Torque Wrench.
1/4" square drive and 7 and 8mm flare style box wrenches
Precision laser cut and heat treated tool steel for strength and lasting performance.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-E-BIKESOCKET05Stock Code:WMTL-E-BIKESOCKET03Stock Code:WMTL-E-BIKESOCKET02Stock Code:WMTL-E-BIKESOCKET06Stock Code:WMTL-E-BIKESOCKET01Stock Code:WMTL-E-BIKESOCKET04Stock Code:WMTL-E-BIKESOCKET10Stock Code:WMTL-E-BIKESOCKET09Stock Code:WMTL-E-BIKESOCKET07Stock Code:WMTL-E-BIKESOCKET11Stock Code:WMTL-E-BIKESOCKET08
Compatible with 60mm Gen 1 Bosch Lockring.
Designed to save the mechanic time and money, our new e-bike lockring sockets are machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. • Precision machined aluminum body • Anodized in Wheels MFG red.Expected Date:02 November 2026$72.00 (RRP)$81.00 (RRP)$81.00 (RRP)$81.00 (RRP)$96.00 (RRP)$100.00 (RRP)$81.00 (RRP)$52.00 (RRP)$72.00 (RRP)$81.00 (RRP)$72.00 (RRP) -
Stock Code:PDTL6460605
Pedro's Pro Bit and Socket Set is designed to work with our torque wrenches offering a full range of tools for the professional mechanic's hex, torx, socket, and pedal needs.
Set includes:
Hex 2, 2.5, 3, 4, 5, 6, & 8mm (25mm), 4 & 5mm (50mm), 10mm (65mm, 3/8" drive)
Torx T10, T15, T20, T25, & T30 (25mm), T25 & T30 (50mm)
Sockets 8,9,10,11,12,13mm (1/4" drive), 14,15,17,19mm (3/8" drive)
Crowfoot 3/8" Drive 15mm Pedal Wrench
Drive Adapters 1/4" square to 1/4" hex, 1/4" hex to 1/4" square, & 3/8" square to 1/4" hex
Foam Holder$142.00 (RRP)Add To Cart
-
Stock Code:ABTLABTPRESSNHV2
This press is the backbone of any modern shop. Bearing related work is becoming more and more common on modern bikes and no shop, professional or amature should pass over these tools. The Modular bearing press starts with the press head. Where most manufactures just have a glorified nut we went further by adding a massive thrust bearing. Not a wimpy little plastic washer either, an actual bearing with balls and races. What this means is that the pressing action is almost completely isolated from the torque, creating a super smooth pressing action that requires noticeably less effort. The Team Issue press ditches the handles in favor of our signature finger spline grip pattern. For those times when things are fitting a little too tight and you don't have the means to correct it, there is a 6mm hex in the top so you can use an allen key for a little extra leverage. We use a 1/2" acme thread for our press shaft, which means a more robust thread and less turning due to it's coarser thread. It also means we have a single diameter to work with and can size our drifts to this dimension, this means your bearings are more likely to go in straight. At the other end of the press is our new Quick Nut. This simple part allows you to slide the nut over the press shaft to the desired location and then click it into place and press away. No endless turning, no pinch hazard and no wasted time. Be aware, the quick nut does require a few uses to fully break in.
The Team Issue Press keeps the Quick Nut from the big press, a sweet little nut that allows you to slide it on and then click it into place on the thread. Way faster, no pinch hazard and secure.
Kit includes a complete handless press head, 12" press shaft, quick nut and the following drifts:
Made in Bend Oregon.
PF30/1.125" headset
24mm bottom bracket drifts, for shimano compatible bottom brackets
22mm bottom bracket drift, single drift for non drive GXP bottom bracket
28.9mm bottom bracket drift, for SRAM DUB
6806 drift for BB30 bottom brackets
1.5" headset drift
centering cone
Additional drifts are on the bearing page and longer press shafts along with service parts are available on the parts page.
We always recommend installing bearings one at a time to ensure they go in straight and don't damage the bearings, components or the tools. Use the centering cone in the empty side of the hub/frame/linkage to keep the press concentric with the bore.$635.00 (RRP)Add To Cart
-
Stock Code:ABTL-MDPLT-AXS
For use with the Decade Chain Tool this AXS Mid Plate is required for the SRAM AXS Road and the new MTB Transmission Flat Top chains. This part is not needed for other 12spd chains from various manufactures. This Mid Plate is visually differentiated from the other Decade Mid Plates by three dots on the face of the plate.
Made in Bend Oregon.$41.00 (RRP)Add To Cart
-
Stock Code:ABTL-TM-HAMMERTI
This fairly specialized tool, designed for the traveling mechanic, is part of our Team Issue line. However, anyone who has used, currently uses, or is thinking about using a hammer in the future will appreciate this beauty.
Coming in at roughly 249 grams(+/-) it's a big weight savings over more traditional hammers. The soft face is replaceable with commonly available 1" threaded faces. At 12" long, it's compact but still long enough to remove those stubborn bearings. We finish off the Team Issue hammer with a custom silicone grip from ESI to give a bit of cushion from the all-metal construction.
Made in Bend, Oregon, with USA sourced grip and soft face.$358.00 (RRP)Add To Cart
