Bottom Bracket

Chris King CERAMIC Road Bottom Bracket Shim/Xtype/FSA (use mtb BB for FSA road Lite cranks ) 24mm spindle

The construction and compatibility of this Chris King® Ceramic Bearing Bottom Bracket are identical to the Chris King® stainless steel bearing bottom bracket. However, this bottom bracket uses ceramic balls, which are lighter, harder and have greater roundness than stainless steel balls, resulting in a bearing with less friction and exceptional speed and strength.

These factors along with Chris King's sealing system mean you need only use a very small amount of low-viscosity lube in the bearing. This means less drag in the bearing, allowing you to pedal with greater efficiency.
•Designed for Shimano™-compatible external type crank systems including Shimano™ Hollowtech II™, Race Face X-Type™, and FSA MegaExo™
•24 ball bearings per side
• Fully user-serviceable bearings

** FIT KIT REQUIRED FOR USE **

ThreadFit™ T47 24i fits 86mm and 92mm shell widths with 24mm spindles.

All our bottom brackets come with King’s legendary, angular-contact bearings. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.

You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.

The Fit Kit for our ThreadFit™ T47 24i is available here.

- King Lifetime Warranty
- Legendary made-in-house bearings
- Threaded security with PressFit 30 shell stiffness
- Engineered, manufactured and assembled in Portland, Oregon USA
- A Fit Kit is required for use
- Uses Chris King bottom bracket cup tool for installation

** FIT KIT REQUIRED FOR USE **

ThreadFit™ T47 24x fits 68mm and 73mm shell widths with 24mm spindles.

It’s a silky smooth, long-lasting bottom bracket built around King’s legendary, angular-contact bearings, either steel or ceramic. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.

You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.

- King Lifetime Warranty
- Legendary made-in-house bearings
- Threaded security with PressFit 30 shell stiffness
- A Fit Kit is required for use
- Engineered, manufactured and assembled in Portland, Oregon USA
- Uses Chris King bottom bracket cup tool for installation

** FIT KIT REQUIRED FOR USE **

ThreadFit™ T47 30i will fit 68mm, 73mm, 83mm, 86mm, and 92mm shell widths with 30mm spindles.

All our bottom brackets come with King’s legendary, angular-contact bearings, either steel or ceramic. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.

You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.

- King Lifetime Warranty
- Legendary made-in-house bearings
- Threaded security with PressFit 30 shell stiffness
- A Fit Kit is required for use
- Engineered, manufactured and assembled in Portland, Oregon USA
- Uses Chris King bottom bracket cup tool for installation

** FIT KIT REQUIRED FOR USE **

ThreadFit™ T47 30x fits 68mm and 73mm shell widths with 30mm spindles.

This bottom bracket comes packed with King’s legendary, angular-contact bearings, either steel or ceramic. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.

You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.

- King Lifetime Warranty
- Legendary made-in-house bearings
- Threaded security with PressFit 30 shell stiffness
- A Fit Kit is required for use
- Engineered, manufactured and assembled in Portland, Oregon USA
- Uses Chris King bottom bracket cup tool for installation

ThreadFit T47A 24 fits T47 BB-Right shells with 24mm spindles.

It’s a silky smooth, long-lasting bottom bracket built around King’s legendary angular-contact bearings.These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.

You want this bottom bracket because it offers super low drag. You want this bottom bracket because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.

- King Lifetime Warranty
- Legendary made-in-house bearings
- Engineered, manufactured and assembled in Portland, Oregon USA
- Uses Chris King bottom bracket cup tool for installation*
- Fit Kit required for use**

Tange LN7922 68x110mm JIS

Aluminum spacer for ISO/English or BSA threaded bottom brackets. Spacers fit between bottom bracket cup and frame. Great for fine tuning bottom bracket shells or improving chainline.

Outer Diameter: 40.7mm
Inner Diameter: 34.9mm
Thickness: 1.8mm
Machined aluminum
Anodized Black
Sold 1 spacer per bag

24mm Outer Silicone Seal for Bottom Brackets

Outer seal for Wheels Mfg BB86/92, PF30-OUT, BB30-OUT, BB-ROAD, BB-MTN bottom brackets.

Note: Install seals with rubber-side facing away from bearing.

24mm ID for Drive-Side cup (Both Shimano and SRAM)
24mm ID for Non-Drive Side cup with 24mm crank spindle (Shimano, FSA, etc)

* Sold Individually

Used to adjust crank chainline or take up any slack when using 24mm (Shimano, FSA, etc.) or 24/22mm (SRAM/TruVativ) Spindle Cranks in any BB30/PF30/BB86/92 or similare crank system.

- 24mm I.D. for use with cranks like Shimano HollowTech II, GXP, FSA
- 30mm I.D. for use with BB30 cranks
- 10 spacers per bag
- Machined engineering-grade Delrin.

Used to take set proper side-load in PF30, BB30 and similar bottom bracket systems when using 30mm, 24mm (Shimano, FSA, etc.) or 22/24mm (SRAM/TruVativ) spindle cranks.

- Choose from 30mm I.D. or 24mm I.D.
- Sold 10 washers per bag