Small Parts
-
Stock Code:HLWA-BDHACLA
If your hubs feature the Shimano Centerlock splined interface rotor mounting system and you want to be able to use traditional 6 bolt type rotors, this simple to use adaptor kit allows you to do so.
Features
Lightweight alloy body with splined interface and 6 fitted stainless pins with a stainless washer and an alloy lockring allows the quick removal of the rotor simply by releasing the low-profile alloy lockring with a standard HG type cassette lockring tool.
Specifications
Material 6061 alloy body and CNC lockring, with stainless pins and washer.
Hub Fitting Shimano Centerlock splined.
Max hub axle 19mm outer axle diameter.
Tool required HG type cassette lockring tool.
Max Torque 40Nm.
Rotor Fitting IS (International Standard) 6 bolt type
Rotor required Stainless IS 1.8mm minimum to 2.3mm maximum.
Max rotor size 180mm Diameter.$35.00 (RRP)Add To Cart
-
Stock Code:HLWA-HUHAWBA5
These adaptors are designed to allow our DJ Wideboy Front hubs to work with almost every fork fitment on the market. Each adaptor set comes as a pair and are made from CNC alloy and finished in anodised black.
$39.00 (RRP)Add To Cart
-
Stock Code:HLWA-HUHAWBAX2
These adaptors are designed to allow our DJ Wideboy Front hubs to work with almost every fork fitment on the market. Each adaptor set comes as a pair and are made from CNC alloy and finished in anodised black.
$39.00 (RRP)Add To Cart
-
Stock Code:HLWA-HUHAWBA2
These adaptors are designed to allow our DJ Wideboy Front hubs to work with almost every fork fitment on the market. Each adaptor set comes as a pair and are made from CNC alloy and finished in anodised black.
$39.00 (RRP)Add To Cart
-
Stock Code:HLWA-HUHADBA2
Halo has developed a 12mm T-axle to work with the DJD BD hub for use with 12mm thru frames.
These axles work with Halo DJD BD hubs.POA -
Stock Code:HLWA-HUHADABCK
Cro-Mo Hub bolt and cap set for DJD Supadrive, DJD BushDrive and MT SS Hubs
$35.00 (RRP) -
Stock Code:HLWA-HUHAZGXRAQ
QR axle end caps for the GXC, RD2 and MTC Boost Supadrive Rear hubs.
$35.00 (RRP)Add To Cart
-
Stock Code:HLWA-HUHAZM6FA2
End caps and spares for our Halo MT (NON BOOST) Front (formally called Spin Doctor 6F) and FAT Front hubs
$35.00 (RRP)Add To Cart
-
Stock Code:HLWA-HUHAZM6FBK
MT Front Boost Disc Adaptor kit turns your standard MT front hub into a Boost compatible configuration (110mm).
The kit consists of:
- Two extension end cones
- 5mm interlocking disc rotor spacer
- Extra-long disc rotor boltsPOA -
Stock Code:HLWA-HUHAUFHMC
Replacement freehubs designed to fit Halo MT (6-Bolt) series Supadrive hubs, the MT Supadrive (142mm), MT Supadrive Boost (148mm) and MT Supadrive DH (150mm).
These 11/12 speed ‘MTB’ length format freehubs are NOT cross-compatible with the slightly longer spline (+1.85mm) ROAD format 10/11/12 speed Halo Supadrive freehubs and hub bodies used on the MTC, GXC and RD2 (Centre-Lock) hubs.$179.00 (RRP)Add To Cart
-
Stock Code:HLWA-HUHAZSVA2H
Replacement axle end cones for the MT Supadrive rear hubs - 12mm thru Shimano HG Cassette. 142, 148 and 157mm O.L.D.
$55.00 (RRP)Add To Cart
-
Stock Code:HLWA-HUHAZSVA2X
Replacement axle end cones for the MT Supadrive rear hubs - 12mm thru SRAM XD Cassette. 142, 148 and 157mm O.L.D.
$39.00 (RRP)Add To Cart
-
Stock Code:HLWA-HUHAQEH
The finishing touch to any classically styled road bike.
A pleasing modern tribute to the classic Italian masters of road racing.
Lightweight cut-out Chrome Steel cam handles with Cro-Mo rods and alloy ends.$65.00 (RRP)Add To Cart
-
Stock Code:HLWA-HXHASVTB
Our MT Supadrive Boost Disc Adaptor kit turns your standard MT Supadrive rear hub (142mm) into a Boost compatible configuration (148mm).
The kit consists of:
A disc side specific extension end cone
A 6mm interlocking disc rotor spacer
Extra-long disc rotor bolts
Please note: this kit is designed to work with our new generation threaded cr-mo axle (HXHASVTMHG for HG type, HXHASVTMXD for XD type). Our new generation threaded cr-mo axle is retro-fittable to older generation MT Supadrive hubs.
Additionally, once this kit has been fitted the wheel rim will need to be moved across 3mm (re-dished) by a wheel builder to be central.$55.00 (RRP)Add To Cart
-
Stock Code:HLWA-HUHAGXFHS
Replacement freehubs designed to fit our GXC Supadrive, MTC Supadrive and RD2 Supadrive hubs.
Manufactured from 7075 alloy. Shimano Road HG type freehubs also come with Anti-Bite steel inserts.
The GXC, MTC and RD2 Supadrive HG Freehub is suitable for Road width 11 speed cassettes.
* Please note, these freehubs do not work with the MT Supadrive or MT Supadrive Boost hubs. These can be identified by the 6 bolt disc mount. *$179.00 (RRP)Add To Cart
-
Stock Code:HLWA-HUHAGXFHM
Replacement freehubs designed to fit GXC Supadrive, MTC Supadrive and RD2 Supadrive (Centre-Lock) hubs.
Please note, these freehubs do not work with the MT Supadrive or MT Supadrive Boost hubs. These can be identified by the 6 bolt disc mount.$179.00 (RRP)Add To Cart
-
Stock Code:HLWA-HUHAUFHHC
MT Supadrive series freehub bodies allow 11 speed MTB cassette usage, but are not suitable for Road width 11 speed cassettes.
MT series HG type freehub note: The original MT series HG type freehubs (Red) used a lightweight 7075 alloy spline body with a Cr-Mo driver. The latest forged and CNC machined 1-piece Cr-Mo HG version freehub (Black) is only 21 grams heavier. The harder body material eliminates any ‘cassette cog bite’ and also allows larger bearings to be used.$179.00 (RRP) -
Stock Code:HLWA-HUHAUFHXC
Replacement freehubs designed to fit Halo MT series Supadrive hubs, the MT Supadrive (142mm), MT Supadrive Boost (148mm) and MT Supadrive DH (150mm)
These 11/12 speed ‘MTB’ length format freehubs are not cross-compatible with the slightly longer spline (+1.85mm) ROAD format 10/11/12 speed Halo Supadrive freehubs and hub bodies used on the MTC, GXC and RD2 hubs.
MT series HG type freehub note: The original MT series HG type freehubs (Red) used a lightweight 7075 alloy spline body with a Cr-Mo driver. The latest forged and CNC machined 1-piece Cr-Mo HG version freehub (Black) is only 21 grams heavier. The harder body material eliminates any ‘cassette cog bite’ and also allows larger bearings to be used.
*** Need MT Supadrive Rear Axle End Cones XD ( HLWA-HUHAZSVA2X ) if converting from a Shimano$179.00 (RRP)Add To Cart
-
Stock Code:HLWA-HUHA6SSK$35.00 (RRP)
Add To Cart
-
Stock Code:HLWA-HUHATA12POA
-
Stock Code:CKWA-CKP506HStock Code:CKWA-CKP504HStock Code:CKWA-CKP503H
Lightweight, stylish, and anodized to match your Chris King precision components, King Thru Axles are the perfect pop of refined detail to bring together your perfect bike build.
A collaboration with Robert Axle Project, King Thru Axles are machined in Oregon by Robert Axle Project and then finished, anodized, and laser marked by Chris King Precision Components. We're proud to work with Robert Axle Project and support more responsible and ethical manufacturing in the cycling industry, especially with a neighbor just a few hours away here in Oregon.
Robert Axle Project's website will help you measure your axle.
- Low profile and lightweight.
- Machined to the tightest standards in the industry.
- Designed, built and quality tested in the USA. Proven around the world.
- Available for front or rear wheel use. Available to fit road, cross, gravel, e-bikes and mountain bikes.
- Not designed to attach Trailers or Trainers.Was:$135.45 (RRP)Now:$97.90 (RRP)Price:$97.90 (RRP)Was:$135.45 (RRP)Now:$97.90 (RRP)Price:$97.90 (RRP)Was:$135.45 (RRP)Now:$97.90 (RRP)Price:$97.90 (RRP) -
Stock Code:PCWA-190BKORStock Code:PCWA-190BLACKStock Code:PCWA-190POLISHStock Code:PCWA-190PUBKStock Code:PCWA-190PWBKStock Code:PCWA-190SILVERStock Code:PCWA-190SIORStock Code:PCWA-191BKORStock Code:PCWA-191BLACKStock Code:PCWA-191POLISHStock Code:PCWA-191PUBKStock Code:PCWA-191PWBKStock Code:PCWA-191SILVERStock Code:PCWA-191SIORStock Code:PCWA-199BKORStock Code:PCWA-199BLACKStock Code:PCWA-199PEWTERStock Code:PCWA-199POLISHStock Code:PCWA-199PUBKStock Code:PCWA-199SILVERStock Code:PCWA-199SIOR
A thoroughly modern take on the traditional internal cam Quick-Release skewer.
The stainless steel shaft screws into the 7075 aluminum head, which is oval, putting the material where it’s needed and not where it isn’t. The handles are a stainless steel/aluminum affair for a good balance of ergonomics and weight savings.
The nuts have a nice matching O-ring and a thread friction element to keep them in place after the wheels are removed.
Order the skewer length that matches your hub’s width.$256.00 (RRP)$256.00 (RRP)$340.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$340.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$512.00 (RRP)$512.00 (RRP)$512.00 (RRP)$681.00 (RRP)$512.00 (RRP)$512.00 (RRP)$512.00 (RRP) -
Stock Code:PCBR-00101PU
A pair of anodized Spring Adjuster Nuts for use with any Paul rim brakes.
$57.00 (RRP)Add To Cart
-
Stock Code:PCBR-06006Stock Code:PCBR-06006BK
There’s nothing wrong with the little plastic barrel adjusters that come stock on Klampers. But Paul being machinist nerds thought a mini version of the big Groovy Barrel Adjuster would look and function EXTRA nice on the Klamper, especially when you color-match the ano to the other bling on your bike.
These also fit any of the other Paul parts with a mini barrel adjuster, like Funky Monkey Cable Hangers, Dropper Triggers, Cross Levers, E-Levers, and Thumbies.
* This is a pair or Raw Adjusters.$77.00 (RRP)$77.00 (RRP)
