Small Parts
-
Stock Code:CKWA-PHB725Stock Code:CKWA-PHB653Stock Code:CKWA-PHB652Stock Code:CKWA-PHB651Stock Code:CKWA-PHB724Stock Code:CKWA-PHB717Stock Code:CKWA-PHB565$32.50 (RRP)$153.00 (RRP)$108.15 (RRP)$37.85 (RRP)$32.50 (RRP)$99.00 (RRP)$21.00 (RRP)
-
Stock Code:CKHS-PHS548S$105.00 (RRP)
-
Stock Code:CKHS-PHS006B
Chris King Black 1-1/8" Grip Nut Conversion Kit
Kit includes lock nut, threaded collet,adjusting ring and baseplate – all the pieces
you'll need to convert a NoThreadSet or 2Nut to a GripNut.
Please note that this systemis not intended for use with spacers.$105.00 (RRP) -
Stock Code:CKHS-PHS714BStock Code:CKHS-PHS714SStock Code:CKHS-PHS701RStock Code:CKHS-PHS720B
Chris King InSet GripLock Bearing Cap 1-1/8 (44mm) for InSet 1, 2, 3, 7, 8 Black
$74.50 (RRP)$74.50 (RRP)POA$74.50 (RRP) -
Stock Code:CKWA-PHB786B-HGStock Code:CKWA-PHB816BStock Code:CKWA-PHB815
Convert your ISO B hub to Shimano HG. Conversion kit is complete with axle, adjustment clamp, driveshell and all driveshell internals for a plug and play swap.
$403.00 (RRP)$499.00 (RRP)$403.00 (RRP) -
Stock Code:CKHS-PHS022BStock Code:CKHS-PHS601B
This kit includes everything you'll need for use with a 1-1/4" frame with a 1-1/8" steerer.
- Stem cap
- Headset Bolt
- Star nut
- Scuff washer
- Bearing cap
- Devolution baseplate$98.28 (RRP)$56.00 (RRP) -
Stock Code:CKHS-PHS726
This factory replacement O-Ring fits Chris King® GripLock™ NoThreadSets™ only.
$8.00 (RRP) -
Stock Code:CKWA-PHB557Stock Code:CKWA-PHB559Stock Code:CKWA-PHB558Stock Code:CKWA-PHB556Stock Code:CKWA-PHB580Stock Code:CKWA-PHB708Stock Code:CKWA-PHB708BStock Code:CKWA-PHB571Stock Code:CKWA-PHB505Stock Code:CKWA-PHB506Stock Code:CKWA-PHB544Stock Code:CKWA-PHB525Stock Code:CKWA-PHB545Stock Code:CKWA-PHB508Stock Code:CKWA-PHB536
Select from side bar
Chris King Rear 135x10mm QR ISO Disc hub Axle (classic disc) 1 piece.
DOES NOT INCLUDE QR end caps or fun bolts. These must be purchased separately.
Use PHB705 if QR needed
Use PHB507 for Fun bolts
• Fits Chris King ISO Rear Hubs (not compatible with 150mm, 157mm, BOOST or Singlespeed Hubs).
• Replacement for 2-piece Axle and allows you to change any bolt on axle to a QR Axle.Expected Date:20 April 2026$161.28 (RRP)$161.28 (RRP)$161.28 (RRP)$161.28 (RRP)$161.28 (RRP)$61.72 (RRP)$61.72 (RRP)$21.00 (RRP)$32.91 (RRP)$32.91 (RRP)$161.28 (RRP)$183.50 (RRP)$306.11 (RRP)$161.28 (RRP)$24.50 (RRP) -
Stock Code:CKWA-PHB502Stock Code:CKWA-PHB504Expected Date:20 April 2026$103.40 (RRP)$32.91 (RRP)
-
Stock Code:CKWA-PHB710Stock Code:CKWA-PHB736Stock Code:CKWA-PHB735BStock Code:CKWA-PHB735Stock Code:CKWA-PHB642Stock Code:CKWA-PHB648Stock Code:CKWA-PHB646Stock Code:CKWA-PHB641Stock Code:CKWA-PHB645Stock Code:CKWA-PHB768Stock Code:CKWA-PHB720Stock Code:CKWA-PHB761Stock Code:CKWA-PHB718Stock Code:CKWA-PHB755Stock Code:CKWA-PHB572Stock Code:CKWA-PHB523Stock Code:CKWA-PHB762Stock Code:CKWA-PHB752Stock Code:CKWA-PHB721Stock Code:CKWA-PHB566Stock Code:CKWA-PHB719Expected Date:20 April 2026Expected Date:20 April 2026Expected Date:20 April 2026$61.72 (RRP)$65.00 (RRP)$76.00 (RRP)$76.00 (RRP)$144.83 (RRP)$153.00 (RRP)$153.00 (RRP)$144.83 (RRP)$153.00 (RRP)$37.85 (RRP)$40.50 (RRP)$153.00 (RRP)$153.06 (RRP)$41.14 (RRP)$184.00 (RRP)$8.55 (RRP)$161.28 (RRP)$41.14 (RRP)$51.50 (RRP)$32.50 (RRP)$40.50 (RRP)
-
Stock Code:CKWA-PHB847
R45 Shimano HG EV driveshell kit includes all the internals.
$362.00 (RRP) -
Stock Code:CKWA-PHB906BStock Code:CKWA-PHB906SStock Code:CKWA-PHB907BStock Code:CKWA-PHB908BStock Code:CKWA-PHB908S
Convert your R45 hub to fit Shimano HG11, HG12 cassettes with the Gen 4 conversion kit.
Gen 4 conversion kits include a pre-assembled axle, driveshell, adjusting clamp, and QR axle ends for a plug and play swap. Installation requires a 2.5mm hex key and T10 Torx tool.
- Not compatible with Classic hubs.
- 130x9mm QR axle.POA$403.00 (RRP)POAPOAPOA -
Stock Code:CKWA-PHB575
R45D 12mm Axle End Cap - Non Drive Side
Drive Side uses PHB571$24.50 (RRP)Add To Cart
-
Stock Code:CKWA-PHB902B
Convert your R45D 6 Bolt Gen. 2 and R45D Centerlock hubs to fit Shimano Micro Spline.
Gen 4 conversion kits include a pre-assembled axle, driveshell, and updated adjusting clamp for a plug and play swap. Installation requires a 2.5mm hex key and T10 Torx tool.
- Compatible with R45D 6-Bolt Gen.2 hubs. Serial numbers will begin with 6910.
- Compatible with all R45D Centerlock hubs. Serial numbers will begin with 6710.
- 142x12mm axle.Expected Date:20 April 2026$403.00 (RRP) -
Stock Code:CKHS-PHS473Stock Code:CKHS-PHS475Stock Code:CKHS-PHS474
Chris King Seal & Snapring Kit for 1 Inch Headsets and Threadfit24 Bottom Brackets.
$21.00 (RRP)$21.00 (RRP)$21.00 (RRP) -
Stock Code:CKWA-PHB514
Drive Ring Spring Retainer for all rear Chris King® hubs except R45.
$22.50 (RRP) -
Stock Code:CKWA-PHB774B
Conversion kit for Chris King ISO (non-boost) hubs to XD using new Gen4 internals.
Includes freehub and bearings, axle, and adjusting clamp.$403.00 (RRP)Add To Cart
-
Stock Code:CKWA-PHB828B$76.00 (RRP)
Add To Cart
-
Stock Code:CKWA-PHB841B$76.00 (RRP)
Add To Cart
-
Stock Code:HLWA-HXHAA1512F
This simple product allows several* 15x100mm thru axle front hub to run with road standard 12×100 thru axle forks.
CNC machined 7075 alloy tube.
Anodised finish.
Lightweight at only 17g.
15mm OD, 12mm ID x 100 (98.5mm long)
*Please note: Some 12mm thru axle forks are only compatible with hubs which have end cones with a maximum outer diameter of 19mm. Most conventional MTB based 15mm thru axle hubs use end cones that have an outer diameter of 21mm or larger and therefore will not fit with the smaller 19mm fork slots.
Please check carefully before purchase that your fork will allow your existing outer hub cones to fit with your forks before purchasing the 15 to 12mm Adaptor Sleeve, as the sleeve does not reduce the outer diameter of the hub end cones. If in doubt please consult your local dealer.$35.00 (RRP)Add To Cart
-
Stock Code:HLWA-HUHAM6SSK
Replacement pawls and springs for all 6Drive hubs (MT, FAT, RS, RO and RD).
$21.00 (RRP)Add To Cart
-
Stock Code:HLWA-HUHAZBAS15
These simple, 5mm lightweight aluminium spacers are designed to fit onto Thru-type hub axles to enable regular 100mm spaced hubs to fit into 110mm (Boost) type spaced fork thru-axle dropouts. (1 x 5mm spacer added each side = 10mm)
$15.00 (RRP)Add To Cart
