Halo 15mm >12mm Front Axle Sleeve
Description
This simple product allows several* 15x100mm thru axle front hub to run with road standard 12×100 thru axle forks.
CNC machined 7075 alloy tube.
Anodised finish.
Lightweight at only 17g.
15mm OD, 12mm ID x 100 (98.5mm long)
*Please note: Some 12mm thru axle forks are only compatible with hubs which have end cones with a maximum outer diameter of 19mm. Most conventional MTB based 15mm thru axle hubs use end cones that have an outer diameter of 21mm or larger and therefore will not fit with the smaller 19mm fork slots.
Please check carefully before purchase that your fork will allow your existing outer hub cones to fit with your forks before purchasing the 15 to 12mm Adaptor Sleeve, as the sleeve does not reduce the outer diameter of the hub end cones. If in doubt please consult your local dealer.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:CKWA-PHB557Stock Code:CKWA-PHB559Stock Code:CKWA-PHB558Stock Code:CKWA-PHB556Stock Code:CKWA-PHB580Stock Code:CKWA-PHB708Stock Code:CKWA-PHB708BStock Code:CKWA-PHB571Stock Code:CKWA-PHB505Stock Code:CKWA-PHB506Stock Code:CKWA-PHB544Stock Code:CKWA-PHB525Stock Code:CKWA-PHB545Stock Code:CKWA-PHB508Stock Code:CKWA-PHB536
Select from side bar
Chris King Rear 135x10mm QR ISO Disc hub Axle (classic disc) 1 piece.
DOES NOT INCLUDE QR end caps or fun bolts. These must be purchased separately.
Use PHB705 if QR needed
Use PHB507 for Fun bolts
• Fits Chris King ISO Rear Hubs (not compatible with 150mm, 157mm, BOOST or Singlespeed Hubs).
• Replacement for 2-piece Axle and allows you to change any bolt on axle to a QR Axle.$161.28 (RRP)$161.28 (RRP)$161.28 (RRP)$161.28 (RRP)$161.28 (RRP)$61.72 (RRP)$61.72 (RRP)$21.00 (RRP)$32.91 (RRP)$32.91 (RRP)$161.28 (RRP)$183.50 (RRP)$306.11 (RRP)$161.28 (RRP)$24.50 (RRP) -
Stock Code:HLWA-HUHAUFHMC
Replacement freehubs designed to fit Halo MT (6-Bolt) series Supadrive hubs, the MT Supadrive (142mm), MT Supadrive Boost (148mm) and MT Supadrive DH (150mm).
These 11/12 speed ‘MTB’ length format freehubs are NOT cross-compatible with the slightly longer spline (+1.85mm) ROAD format 10/11/12 speed Halo Supadrive freehubs and hub bodies used on the MTC, GXC and RD2 (Centre-Lock) hubs.$179.00 (RRP)Add To Cart
-
Stock Code:CKWA-PHB712B
Adjustment clamps are used to adjust bearing preload on Chris King hubs.
- Includes one Adjustment Clamp
- Fits ONLY Chris King ISO B Rear Hubs with twin-bearing driver/axle$75.50 (RRP)Add To Cart
-
Stock Code:BTWA-BT-TA-F-606$39.00 (RRP)
Add To Cart
-
Stock Code:PCWA-190BKORStock Code:PCWA-190BLACKStock Code:PCWA-190POLISHStock Code:PCWA-190PUBKStock Code:PCWA-190PWBKStock Code:PCWA-190SILVERStock Code:PCWA-190SIORStock Code:PCWA-191BKORStock Code:PCWA-191BLACKStock Code:PCWA-191POLISHStock Code:PCWA-191PUBKStock Code:PCWA-191PWBKStock Code:PCWA-191SILVERStock Code:PCWA-191SIORStock Code:PCWA-199BKORStock Code:PCWA-199BLACKStock Code:PCWA-199PEWTERStock Code:PCWA-199POLISHStock Code:PCWA-199PUBKStock Code:PCWA-199SILVERStock Code:PCWA-199SIOR
A thoroughly modern take on the traditional internal cam Quick-Release skewer.
The stainless steel shaft screws into the 7075 aluminum head, which is oval, putting the material where it’s needed and not where it isn’t. The handles are a stainless steel/aluminum affair for a good balance of ergonomics and weight savings.
The nuts have a nice matching O-ring and a thread friction element to keep them in place after the wheels are removed.
Order the skewer length that matches your hub’s width.$256.00 (RRP)$256.00 (RRP)$340.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$340.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$512.00 (RRP)$512.00 (RRP)$512.00 (RRP)$681.00 (RRP)$512.00 (RRP)$512.00 (RRP)$512.00 (RRP)
