Chris King XD Conversion Kit C/L ISO 142
Description
Conversion kit for Chris King ISO hubs to XD using new Gen4 internals.
Includes freehub and bearings, axle, and adjusting clamp.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:CKWA-PHB557Stock Code:CKWA-PHB559Stock Code:CKWA-PHB558Stock Code:CKWA-PHB556Stock Code:CKWA-PHB580Stock Code:CKWA-PHB708Stock Code:CKWA-PHB708BStock Code:CKWA-PHB571Stock Code:CKWA-PHB505Stock Code:CKWA-PHB506Stock Code:CKWA-PHB544Stock Code:CKWA-PHB525Stock Code:CKWA-PHB545Stock Code:CKWA-PHB508Stock Code:CKWA-PHB581Stock Code:CKWA-PHB536
Select from side bar
Chris King Rear 135x10mm QR ISO Disc hub Axle (classic disc) 1 piece.
DOES NOT INCLUDE QR end caps or fun bolts. These must be purchased separately.
Use PHB705 if QR needed
Use PHB507 for Fun bolts
• Fits Chris King ISO Rear Hubs (not compatible with 150mm, 157mm, BOOST or Singlespeed Hubs).
• Replacement for 2-piece Axle and allows you to change any bolt on axle to a QR Axle.$161.28 (RRP)$161.28 (RRP)$161.28 (RRP)$161.28 (RRP)$161.28 (RRP)$61.72 (RRP)$61.72 (RRP)$21.00 (RRP)$32.91 (RRP)$32.91 (RRP)$161.28 (RRP)$183.50 (RRP)$306.11 (RRP)$161.28 (RRP)$440.00 (RRP)$24.50 (RRP) -
Stock Code:BTWA-4055822059428$69.95 (RRP)
Add To Cart
-
Stock Code:WMWA-RTA-12-154-1.0Stock Code:WMWA-RTA-12-160-1.0Stock Code:WMWA-RTA-12-162-1.0Stock Code:WMWA-RTA-12-166-1.0Stock Code:WMWA-RTA-12-168-1.0Stock Code:WMWA-RTA-12-172-1.0Stock Code:WMWA-RTA-12-174-1.0Stock Code:WMWA-RTA-12-175-1.0Stock Code:WMWA-RTA-12-180-1.0Stock Code:WMWA-RTA-12-185-1.0Stock Code:WMWA-RTA-12-194-1.0Stock Code:WMWA-RTA-12-218-1.0Stock Code:WMWA-RTA-12-164-1.5Stock Code:WMWA-RTA-12-172-1.5Stock Code:WMWA-RTA-12-229-1.5Stock Code:WMWA-RTA-12-165-1.75Stock Code:WMWA-RTA-12-172-1.75Stock Code:WMWA-RTA-12-176-1.75Stock Code:WMWA-RTA-12-180-1.75Stock Code:WMWA-RTA-12-199-1.75
Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.
Product features:
- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles
Tech Specs:
- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USAExpected Date:29 August 2025Expected Date:29 August 2025Expected Date:29 August 2025Expected Date:29 August 2025$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP) -
Stock Code:PCWA-190BKORStock Code:PCWA-190BLACKStock Code:PCWA-190POLISHStock Code:PCWA-190PUBKStock Code:PCWA-190PWBKStock Code:PCWA-190SILVERStock Code:PCWA-190SIORStock Code:PCWA-191BKORStock Code:PCWA-191BLACKStock Code:PCWA-191POLISHStock Code:PCWA-191PUBKStock Code:PCWA-191PWBKStock Code:PCWA-191SILVERStock Code:PCWA-191SIORStock Code:PCWA-199BKORStock Code:PCWA-199BLACKStock Code:PCWA-199PEWTERStock Code:PCWA-199POLISHStock Code:PCWA-199PUBKStock Code:PCWA-199SILVERStock Code:PCWA-199SIOR
A thoroughly modern take on the traditional internal cam Quick-Release skewer.
The stainless steel shaft screws into the 7075 aluminum head, which is oval, putting the material where it’s needed and not where it isn’t. The handles are a stainless steel/aluminum affair for a good balance of ergonomics and weight savings.
The nuts have a nice matching O-ring and a thread friction element to keep them in place after the wheels are removed.
Order the skewer length that matches your hub’s width.$256.00 (RRP)$256.00 (RRP)$340.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$340.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$256.00 (RRP)$512.00 (RRP)$512.00 (RRP)$512.00 (RRP)$681.00 (RRP)$512.00 (RRP)$512.00 (RRP)$512.00 (RRP) -
Stock Code:WMWA-FTA-12-118-1.5Stock Code:WMWA-FTA-12-120-1.5Stock Code:WMWA-FTA-12-125-1.5Stock Code:WMWA-FTA-12-128-1.5Stock Code:WMWA-FTA-12-133-1.5Stock Code:WMWA-FTA-15-125-1.5Stock Code:WMWA-FTA-15-141-1.5Stock Code:WMWA-FTA-15-145-1.5Stock Code:WMWA-FTA-15-148-1.5Stock Code:WMWA-FTA-15-155-1.5Stock Code:WMWA-FTA-15-158-1.5Stock Code:WMWA-FTA-15-189-1.5Stock Code:WMWA-FTA-15-198-1.5
Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.
Product features:
- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles
Tech Specs:
- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USAExpected Date:29 August 2025$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)
