Halo MT Supadrive Rear Axle End Cones HG
Description
Replacement axle end cones for the MT Supadrive rear hubs - 12mm thru Shimano HG Cassette. 142, 148 and 157mm O.L.D.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:CKWA-PHB557Stock Code:CKWA-PHB559Stock Code:CKWA-PHB558Stock Code:CKWA-PHB556Stock Code:CKWA-PHB580Stock Code:CKWA-PHB708Stock Code:CKWA-PHB708BStock Code:CKWA-PHB571Stock Code:CKWA-PHB505Stock Code:CKWA-PHB506Stock Code:CKWA-PHB544Stock Code:CKWA-PHB525Stock Code:CKWA-PHB545Stock Code:CKWA-PHB508Stock Code:CKWA-PHB510Stock Code:CKWA-PHB581Stock Code:CKWA-PHB536
Select from side bar
Chris King Rear 135x10mm QR ISO Disc hub Axle (classic disc) 1 piece.
DOES NOT INCLUDE QR end caps or fun bolts. These must be purchased separately.
Use PHB705 if QR needed
Use PHB507 for Fun bolts
• Fits Chris King ISO Rear Hubs (not compatible with 150mm, 157mm, BOOST or Singlespeed Hubs).
• Replacement for 2-piece Axle and allows you to change any bolt on axle to a QR Axle.Expected Date:06 June 2024Expected Date:06 June 2024Expected Date:06 June 2024$161.28 (RRP)$161.28 (RRP)$161.28 (RRP)$161.28 (RRP)$161.28 (RRP)$61.72 (RRP)$61.72 (RRP)$26.21 (RRP)$32.91 (RRP)$32.91 (RRP)$161.28 (RRP)$153.06 (RRP)$306.11 (RRP)$161.28 (RRP)$286.36 (RRP)$440.00 (RRP)$34.97 (RRP) -
Stock Code:WMWA-PVXT2-S
Wheels MFG Presta valve extender 2" Silver 1 per
These valve extenders allow you to use presta valve tubes with any stem length in deep profile rims
Available in 1-1/4", 2", and 3" lengths
Silver or black anodized (Silver in 1-1/4" length only)$9.26 (RRP)Add To Cart
-
Stock Code:CKWA-PHB782BStock Code:CKWA-PHB322Stock Code:CKWA-PHB331Stock Code:CKWA-PHB324Stock Code:CKWA-PHB313Stock Code:CKWA-PHB332Stock Code:CKWA-PHB314Stock Code:CKWA-PHB701Stock Code:CKWA-PHB587Stock Code:CKWA-PHB308Stock Code:CKWA-PHB783BStock Code:CKWA-PHB304Stock Code:CKWA-PHB702BStock Code:CKWA-PHB702Stock Code:CKWA-PHB342
Select from side bar
Chris King Front 9mm Quick Release SD ISO hub Axle
To make the conversion from a 15mm SD thru hub to a standard 9mm QR ISO disc front bike hub aslo need PHB308, PHB701Expected Date:06 June 2024Expected Date:06 June 2024$68.25 (RRP)$120.97 (RRP)$120.97 (RRP)$120.97 (RRP)$120.97 (RRP)$120.97 (RRP)$61.72 (RRP)$32.91 (RRP)POA$32.91 (RRP)$125.00 (RRP)$120.97 (RRP)$61.72 (RRP)$61.72 (RRP)$25.87 (RRP) -
Stock Code:CKWA-PHB578
This axle is specifically for Gen 2 ISO DH rear hubs. They will not fit Gen 1 ISO DH hubshells.
Expected Date:06 June 2024POA -
Stock Code:WMWA-RTA-12-180-1.0
Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.
Product features:
- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles
Tech Specs:
- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA$75.00 (RRP)Add To Cart
