Components
-
Stock Code:SMFK23280
This fork is only to be sold with Wolverine frames or as a replacement for a Wolverine. We don't stock enough for general sales. - Flat lugged crown
– Tange Infinity CrMo steel
– Flat lugged crown
– IS Disc mount
– Double eyelets at fork tips
– Mini rack mounts
– Low rider pannier mounts
– 50mm rake
– 400mm axle to crown$358.00 (RRP)Add To Cart
-
Stock Code:SMFK23008
A tough flat lugged crown fork option for the Soma Wolverine and other gravel/CX frames with a 1-1/8" headtube.
– Tange Infinity CrMo
– Flat lugged crown
– IS Disc mount
– Double eyelets at fork tips
– Mini rack mounts
– Low rider pannier mounts
– 50mm rake
– 400mm axle to crown
– 1100g approx weight$379.00 (RRP) -
Stock Code:SMFK23281
For those who want a little more front end stiffness out of their Wolverine.
– Tange Infinity CrMo
– Unicrown straight blade
– 405mm axle to crown
– 50mm rake
– Fits 700x45mm tires with
fenders (this has slightly less
clearance than the lugged)
– Low rider pannier mounts
* 15mm TRU-AXLE INCLUDED$464.00 (RRP) -
Stock Code:SMFK231909
A tough unicrown fork option for the Soma Wolverine and other gravel/CX frames with a 1-1/8" headtube. Version 3 model has a new fork end design and adopts the flat mount disc standard.
– Tange Infinity CrMo
– Unicrown straight blade
– 405mm axle to crown
– 50mm rake
– Fit flat mount disc (160mm rotor - with adapter)
– Fits 700x45mm tires with fenders (this has slightly less clearance than the lugged crown fork)
– Triple bosses on fork leg to fit low rider pannier rack or cage
– 15 x 100mm thru-axle included
– Weight: 3.3 lbs (with uncut 350mm steerer and thru-axle bolts)Expected Date:16 April 2026$590.00 (RRP) -
Stock Code:SMHB27098
Here is your alternative to "alternative drop bars". It's wide and takes MTB grips as well as bar tape. The grip area is long; long enough to run grip shifters (including Rohloff) and flat bar levers. But the Gator will also take aero levers just like the Junebug. Try it bikecamping, offroading, or touring.
- 6061 butted aluminum
- Width: 655mm at ends, center-to-center
- Width: 505mm at front of drops, center-to-center
- Width of flats on top: 340mm
- Center: 31.8mm
- Drops flare out at 20° angle
- Drops are 190mm long and have an OD of 22.2 (i.e. they can take flat bar grips)
- Reach: 65mm / Drop: 112-160mm
(Reach and drop is relative to the angle you install these bars at. On these types of bars, you want to angle the drops down, not have them parallel to the ground as with road bars)
- Weight: 400g
- No cable grooves
- Shotpeen finish$214.00 (RRP) -
Stock Code:SMHB280144
If you find your current bars were cut too short or designed too short to fit your brake lever and shifter set up, check these out.
Attach these to your bar ends to add 50mm (2") to each side of your bar. Also useful if you want to your cruiser bars to reach back a little farther.
- For city/MTB bars with 22.2mm OD.
- Aluminum constuction
- 50mm of extension per unit
- The resulting fit is not perfectly seamless, but good enough to where it should feel normal after grips are installed.
- DO NOT use on bars that have been partially machined out at the ends (to fit bar end shifters or reverse levers) This includes Soma Oxford, Sparrow and 3-speed II bars
- ID not sized to accept reverse levers or bar end shifters.
- Requires a 6mm hex key (2 inches long) to installExpected Date:16 April 2026$112.00 (RRP) -
Stock Code:SMHB278035
The Soma Gullwing was designed to be the most natural way to adapt a road bike to flat bars while still retaining your integrated road shift/brake levers.
The bar has a 30mm rise and 25ª backsweep. Harder to see in photos is the 7° drop at the grips which suits a semi-aggressive ride position and puts your wrists in a better angle to operate the levers. The curve for the backsweep also creates the ideal amount of brake lever travel for road levers.
The brake lever hoods can be used as a secondary place to rest your hands and to get more aero. Hood position feels similar to a 38cm road bar, which is fine, since this is not the primary hand position.
Grip section is 22.2mm OD, so you can either run MTB grips or bar tape.
Straight section near the clamp is 110mm wide, which gives some room for accessories or possibly aero bars.
Designed in Japan by Tokyo San Esu.
• Width: 620mm
• Center: 31.8mm OD
• Material: 6061-T6 Aluminum
• Rise: 30mm (with 7° down slope at grips)
• Backsweep: 25°
• Grip OD: 22.2mm
• Lever mounting area OD: 23.8mm
• Weight: 290g
*** Not feasible to use with Campagnolo Ergo levers, L-Twoo, or other models where one of the shifters is on the inboard side of the lever.Expected Date:16 April 2026$233.00 (RRP) -
Stock Code:SMHB27544Stock Code:SMHB27548Stock Code:SMHB27556Stock Code:SMHB27527Stock Code:SMHB27540Stock Code:SMHB27541Stock Code:SMHB27546Stock Code:SMHB27549Stock Code:SMHB27550Stock Code:SMHB27553Stock Code:SMHB27554Stock Code:SMHB27524Stock Code:SMHB27525
Road bar with a round compact bend and shallow drop. Shape makes it easy to get into a natural position in the drops and brake levers are within easy reach.
- 6061-T6 aluminum
- Drop: 130mm
- Reach: 75mm$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)$175.00 (RRP) -
Stock Code:SMHB280123Stock Code:SMHB280124Stock Code:SMHB280125
We have added adjustable extensions to our Hwy One compact drop road handle bar. Designed mainly as additional hand position on long road or gravel riding. The clamps and extensions are not fixed, so you can rotate the extensions into different positions.
- 6061-T6 aluminum
- Drop: 130mm
- Reach: 75mm
- 31.8mm center
- Single grooveWas:$292.00 (RRP)Now:$187.00 (RRP)Price:$187.00 (RRP)Was:$292.00 (RRP)Now:$187.00 (RRP)Price:$187.00 (RRP)Was:$292.00 (RRP)Now:$187.00 (RRP)Price:$187.00 (RRP) -
Stock Code:SMFK230060
Matching fork for the Soma Jawbone A-Type frame.
- Tange CrMo steel
- Steve Potts Type II-R construction
- Axle to Crown: 420mm
- Rake: 50mm
- Investment cast thru-axle dropouts (12mm x 100mm)
- One set of cargo cage bosses per leg, lowest boss can be used for a pannier rack
- IS disc mount
- Sage Green w/ black
If you are getting this fork for the Jawbone, you need a ZS44 headset.
* Since this is for matching to a frame, we reserve the right to restrict sales of this item to customers who are buying a frame.$801.00 (RRP)Add To Cart
-
Stock Code:SMFK230062
Matching fork for the Soma Jawbone B-Type frame.
- Tange CrMo steel
- Fits QR hubs
- Axle to Crown: 420mm
- Rake: 50mm
- IS disc mounts, rotor fit up to 180mm
- Two sets of cargo cage bosses per leg, pannier rack bosses on inside and outside leg
- Two sets of fender/rack eyelets at fork ends
If you are getting this fork for the Jawbone, you need a ZS44 headset.
*Since this is for a frame and we have limited quantities, we reserve the right to restrict sales to only customers purchasing the Jawbone frame.$569.00 (RRP) -
Stock Code:SMSD38651
Features superlight padding and a modern low-profile form. Fairly flat top for good sit-bones support with comfort vent to reduce perineal pressure. Available in multiple colors with minimalistic graphics ( logo is red not yellow ). Brown cover is genuine leather.
- Comfort vent base
- Durable CrMo rails
- Longer rails for maximum adjustability
- Superlight padding
- Synthetic leather cover (Genuine leather on the brown) - Colors: Black, red, blue, white, brown
- 133 x 270mm$100.33 (RRP) -
Stock Code:SMSP39456
Soma Seatpost Black 27.2mm
- Forged alloy
- Length 350mm
- Single bolt clamp
- Sand blasted finish$78.00 (RRP) -
Stock Code:SMHB27731
6061-T6 shotpeened aluminum handlebar that offers multiple hand positions for comfortable riding. Will accommodate bar end shifters.
- Width: 505mm
- Drop: 60mm
- 25.4mm clamp diameter
- 23.8mm grip diameter
- Weight: 320gExpected Date:16 April 2026$156.00 (RRP) -
Stock Code:SMHB27782
Similar in shape to the Nitto Moustache Bar (and our 3-Speed Bar), but designed for flat bar levers and grips instead of aero levers and tape. Offers multiple hand positions for comfortable riding.
- 6061-T6 aluminum
- Clamp diameter 25.4mm
- Grip diameter 22.0mm
- Width 540mm
- Drop 50mm
- Polished silver
- Weight 320 gmExpected Date:16 April 2026$156.00 (RRP) -
Stock Code:SMFK23011
Soma Chromoly Mountain Fork With Disc Brake Mounts 440mm
- Universal disc brake mounts, does not have canti brake bosses
- Unicrown with curved blades
- 1-1/8in. streerer
- 440mm axle to crown length (is designed for 26" wheel MTB's made for 80mm travel forks)
- Fork tip eyelets
-1225 grams
-300mm steerer
-43mm rakeExpected Date:16 April 2026$379.00 (RRP) -
Stock Code:SMFK23013Stock Code:SMFK231901
A rigid CrMo fork suspension adjusted to mimic the length of 26" wheel with 100mm travel forks. Also recommended for 650b bikes designed around 80mm travel forks.
– Tange Infinity CrMo
– Axle to crown: 453mm
– Steerer: 250mm threadless, 1-1/8"
– Hub spacing: 100mm (for QR axle hubs)
– 43mm rake
– IS disc mount
– Low rider pannier bosses
– Fender eyelet on dropoutExpected Date:16 April 2026Expected Date:16 April 2026$379.00 (RRP)$358.00 (RRP) -
Stock Code:SMFK231913
A rigid fork for early 90's mountain bikes with 1" threaded steerer forks. The length is good match for a frame that was designed for a Rock Shox Judy 63mm travel fork.
Measure your current suspension fork at its recommended sag to determine if this rigid fork is a good replacement for your bicycle.
– Tange Chromoly steel
– Axle to crown: 425mm
– Cantilever bosses (no disc mounts)
– Rake: 40mm
– 50mm of threads
(26" wheels only of course)$233.00 (RRP) -
Stock Code:SMHB27845
29ers have a naturally high front end. This is also true of 26ers with long travel forks. This may result in an undesirably upright ride position. The Odin gives you the extra sweep of a riser bars without the rise. Rotate slightly to add a bit of downward or upward sweep.
- Tange Aluminum
- Width: 715mm (28.15")
- Shotpeen Black
- 25.4 mm center
- 15° sweep
- Zero rise
- 360 grams
.Expected Date:16 April 2026$144.00 (RRP) -
Stock Code:SMHB27736Expected Date:16 April 2026$175.00 (RRP)
-
Stock Code:SMHB260011
Swept back town bike handlebar with generous width and leverage. Good option when using a porteur rack, basket or bar bag, since it doesn't sweep too forward.
• 6061-T6 aluminum
• Polished finish, silver or black
• Width: 650mm
• Rise: 25mm
• Center: 31.8mm
• Grip Area Diameter: 22.2mm
• Grip Area Length: 160mm
• Backsweep: 73°
• The internal diameter of the ends are machined to fit some bar end shifters and reverse brake levers.
• Bends forward 22° before bending backwards.
• Weight: 465 grams$97.00 (RRP) -
Stock Code:SMHB260012
Swept back town bike handlebar with generous width and leverage. Good option when using a porteur rack, basket or bar bag, since it doesn't sweep too forward.
• 6061-T6 aluminum
• Polished finish, silver or black
• Width: 650mm
• Rise: 25mm
• Center: 31.8mm
• Grip Area Diameter: 22.2mm
• Grip Area Length: 160mm
• Backsweep: 73°
• The internal diameter of the ends are machined to fit some bar end shifters and reverse brake levers.
• Bends forward 22° before bending backwards.
• Weight: 465 grams$97.00 (RRP) -
Stock Code:SMHB27869Stock Code:SMHB27872Stock Code:SMHB27801
The Sparrow is a touring/townie bar. The 490mm version is more agile for squeezing through traffic than other townie/MTB bars. The 520mm is still narrow, but with a grip area that fits levers and shifters. The 560mm size is better for climbing and single-speeders. Try all the sizes on a single-speed or fixie. Can be used flipped to be used as a riser bar or down for a less upright position.
- Shotpeened Tange Aluminum
- Widths: 560 mm, 520mm or 490mm
- Silver or Black
- 25.4 mm clamp diameter
- 50mm drop/rise
- 22.2mm grip diameter, 20.0mm inside diameter at ends to allow use of pursuit levers.
- Weight 245gExpected Date:16 April 2026Expected Date:16 April 2026$170.00 (RRP)$170.00 (RRP)$170.00 (RRP) -
Stock Code:SMST268003SStock Code:SMST268004SStock Code:SMST268005
Slender profile stem looks great on a steel bike. Tall 80mm steerer clamp reduces need for headset spacers.
- Minimum insertion is 40mm
– TIG-welded CrMo steel
– Single bolt clamp for either 26.0mm bars or 31.8mm bars
– Steerer pinch bolt is located in front to avoid painful knee contact
– Angle: 17°
– Chrome-plated
– Weight: 200g (110mm)Expected Date:16 April 2026$175.00 (RRP)$175.00 (RRP)$175.00 (RRP)
