Soma Moustache II 3SPD 25.4mm Silver
Description
Similar in shape to the Nitto Moustache Bar (and our 3-Speed Bar), but designed for flat bar levers and grips instead of aero levers and tape. Offers multiple hand positions for comfortable riding.
- 6061-T6 aluminum
- Clamp diameter 25.4mm
- Grip diameter 22.0mm
- Width 540mm
- Drop 50mm
- Polished silver
- Weight 320 gm
Webshops and Bike shops
You may also be interested in...
-
Stock Code:SLHB-HB0419Stock Code:SLHB-HB1112
The Open bar is an upright bar but not an uptight bar. It’s equally suited to cruising, commuting, and even some singletrack, though it should be noted that this is not by any means a DH bar. We left it a bit flexy to take some of the harsh out of your ride. The angle makes it comfy for your wrists. The width enables loads of control. It’s got plenty of room for grips, shifters and brake levers. Knurled clamp area. 4130 CroMoly steel.
Clamp diameter: 25.4mm
Width: 666mm
Rise: 40mm
Sweep Angle: 53 degrees
Color: E.D. coated Black.POAPOA -
Stock Code:TNHB-HB-E116
A flat bar with an off center clamp area allowing a flat riding position and reversible for an 8mm drop for 29 inch bikes. 8° of backsweep for comfort. 730mm (29?) in width for plenty of leverage.
Bars are made with three different fiber types with different tensile strength and tensile modulus, including High Strength carbon fibers. This helps to allocate stiffness and flex where needed.
Bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders.
All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus.
1.5K woven impact ends help prevent damage to uni directional fibers from shortening the bar or impact with the ground.
Weight 185g
*NOT SUITABLE FOR BAR ENDS$320.00 (RRP) -
Stock Code:TNHB-HB-E128
Thomson Cyclocross 42x31.8 Carbon
Clipon compatible keep all accessory clamps inside the area marked on the bar as safe for clamping. 90mm total safe clamp area available.
For Cyclocross we present the carbon CX bar. The natural transition from your Thomson road bar for the ‘cross season. Twin flats on the bottom of the bar allow taping your housing to create a completely round bar when wrapped. Top profile is round and as wide as possible. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands.
Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed.
All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus.
Both the Road and Cross bar are made in one piece, not three pieces co-molded and glued together.
Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders.
Reach 78.5mm. Drop is proportional.
Cross drops are: 40CM 131mm, 42CM 133mm, 44CM 135mm.$355.00 (RRP) -
Stock Code:SMHB278031Stock Code:SMHB278032
Riser bar with extra bend and lots of rise. Try it for bike packing or commuting. Also a bar to look at if your bike feels like it has too much reach or too little stack.
– 6061 T6 Aluminum
– Width: 780mm
– Center: 31.8mm
– Rise: 70mm
– Backsweep: 30 degrees
– Upsweep: 5 degrees
– Weight: 470g
(Not made for aggressive Enduro or DH riding)$214.00 (RRP)$214.00 (RRP) -
Stock Code:SAHB-HB8261Stock Code:SAHB-HB8263
Salsa Cowbell Drop Handlebars. 12 degree flare at the drops. Curve designed for smooth transition to the hoods of current integrated shift/brake levers.
- Top radius allows comfortable hand positions all the way across, while maintaining short reach
- 6061-T6 Double butted alloy
- Designed to allow a flat transition between handlebar and brake lever
- Flattened indentation for cable routing
- 12 degree outward bend in the drops is great for gravel riding and cross racing
- 120mm wide center section for mounting accessories$121.13 (RRP)POAPOA
