Wheels Manufacturing
-
Stock Code:WMDH-099
Attaches to frame with (2) M5x8 Flat Head Screws
Fasteners not included
Replaces:
Electra Part #368808
KHS Part # 190
Marin Hanger 5
Novara Type L & #K09A (Replaces Type E)
Electra
Townie Balloon 7D - 2011-2015
Townie Balloon 8D - 2009-2010
Townie Balloon 9D - 2007-2008
Townie Euro 24D - 2007-2010
Townie Euro 8D - 2007-2010
Townie Original 21D - 2007-2015
Townie Original 24D - 2007-2015
Townie Original 7D - 2007-2015
Garneau
Sonix - 2008
KHS
Tandem Alite - 2003-2010
Tandem Cross - 2006-2010
Tandem Milano - 2006-2010
Marin
Bobcat Trail - 2000
Hawk Hill/SE - 2000
Madrone Trail - 2000
Motiv
Ground Pounder - 2012-2013
Novara
Aspen - 2000-2003
Aspen - 2005-2009
Bonanza - 2000-2003
Bonanza - 2005-2011
Bonita - 2001-2003
Bonita - 2005-2013
Corsa - 2002-2013
Fiona - 2010-2013
Flirt - 2007-2009
Forza - 2009-2013
Metro - 2003-2009
Metro DLX - 2005
Mia - 2007-2013
Piedra - 2000-2003
Piedra - 2005-2009
Pika - 2010-2013
Portal - 2010-2013
XR - 2004-2005$52.00 (RRP)Add To Cart
-
Stock Code:WMWA-PSS-1
Presta valve saver for use in schraeder valve rim. Adapts presta valve tube to fit in schraeder-drilled rim. Helps prevent valve breakage
Available in 2-pc., 10-pc. and 24-pc. packaging
Long version available for longer Presta stems [PSS-2]Expected Date:02 November 2026$13.00 (RRP) -
Stock Code:WMDH-M8-DROP192BOLT$20.00 (RRP)
Add To Cart
-
Stock Code:WMSC-CHS-20Stock Code:WMSC-CHS2-HD0007$15.00 (RRP)$15.00 (RRP)
-
Stock Code:WMSC-HS-KIT1
Wheels MFG 1" Headset Spacer KIT Black and Silver assorted 94 piece
Item: Width: Color: Qty:
NKHS-1.5 1.5 mm Silver 20
NKHS-2.5 2.5 mm Silver 20
NKHS-5 5 mm Silver 15
NKHS-7.5 7.5 mm Silver 5
NKHS-10 10 mm Silver 3
NKHS-15 15 mm Silver 3
BHS-2.5 2.5 mm Black 15
BHS-5 5 mm Black 10$315.00 (RRP)Add To Cart
-
Stock Code:WMSC-NKHS-02.5Stock Code:WMSC-BHS2-HD0011Stock Code:WMSC-HS2-HD0019Stock Code:WMSC-BHS2-HD0012Stock Code:WMSC-HS2-HD0020Stock Code:WMSC-BHS2-HD0013Stock Code:WMSC-HS2-HD0021Stock Code:WMSC-BHS2-HD0014Stock Code:WMSC-HS2-HD0022Stock Code:WMSC-HS2-HD0023Stock Code:WMSC-WHS2-10Stock Code:WMSC-WHS2-20Stock Code:WMSC-BHS2-HD0017Stock Code:WMSC-HS2-HD0025Stock Code:WMSC-BHS2-40Stock Code:WMSC-HS2-HD0026
Black aluminum headset spacer for 1-1/8" fork steerer. 20mm thick.
Inner Diameter: 28.9mm
Outer Diameter: 34.4mm
Thickness: 40mm
Precision-machined aluminum
Anodized black
Sold Individually$29.00 (RRP)$29.00 (RRP)$29.00 (RRP)$26.00 (RRP)$26.00 (RRP)$26.00 (RRP)$26.00 (RRP)$36.00 (RRP)$36.00 (RRP)$36.00 (RRP)$17.00 (RRP)$17.00 (RRP)$8.00 (RRP)$8.00 (RRP)$18.90 (RRP)$17.00 (RRP) -
Stock Code:WMCE-CAB-1$67.00 (RRP)
-
Stock Code:WMCE-CAB-2$67.00 (RRP)
Add To Cart
-
Stock Code:WMBB-BB-1.8Stock Code:WMBB-BB-2.5
Aluminum spacer for ISO/English or BSA threaded bottom brackets. Spacers fit between bottom bracket cup and frame. Great for fine tuning bottom bracket shells or improving chainline.
Outer Diameter: 40.7mm
Inner Diameter: 34.9mm
Thickness: 1.8mm
Machined aluminum
Anodized Black
Sold 1 spacer per bag$13.00 (RRP)$13.00 (RRP) -
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punchExpected Date:02 November 2026Expected Date:02 November 2026$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Expected Date:02 November 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:WMBB-BB86-GXPSEAL
22mm x 41mm GXP outer seal for Wheels Mfg bottom brackets. This seal is for the non-drive side cup when using 24/22mm spindle cranksets (SRAM, Truvativ, etc).
Note: Install seal with lettering facing towards the bearing.
Fits the following bottom brackets:
- BB30 / PF30 Outboard
- BB86/92$6.00 (RRP) -
Stock Code:WMBB-BBSEAL-SRAMStock Code:WMBB-24MMSEAL
24mm Outer Silicone Seal for Bottom Brackets
Outer seal for Wheels Mfg BB86/92, PF30-OUT, BB30-OUT, BB-ROAD, BB-MTN bottom brackets.
Note: Install seals with rubber-side facing away from bearing.
24mm ID for Drive-Side cup (Both Shimano and SRAM)
24mm ID for Non-Drive Side cup with 24mm crank spindle (Shimano, FSA, etc)
* Sold Individually$15.00 (RRP)$10.00 (RRP) -
Stock Code:WMBB-BB-24MM-0.5Stock Code:WMBB-BB-24MM-1.0
Used to adjust crank chainline or take up any slack when using 24mm (Shimano, FSA, etc.) or 24/22mm (SRAM/TruVativ) Spindle Cranks in any BB30/PF30/BB86/92 or similare crank system.
- 24mm I.D. for use with cranks like Shimano HollowTech II, GXP, FSA
- 30mm I.D. for use with BB30 cranks
- 10 spacers per bag
- Machined engineering-grade Delrin.Expected Date:02 November 2026Expected Date:02 November 2026$29.00 (RRP)$29.00 (RRP) -
Stock Code:WMBB-WAVEWSH-24MM-10Stock Code:WMBB-WAVEWSH-30MM-10
Used to take set proper side-load in PF30, BB30 and similar bottom bracket systems when using 30mm, 24mm (Shimano, FSA, etc.) or 22/24mm (SRAM/TruVativ) spindle cranks.
- Choose from 30mm I.D. or 24mm I.D.
- Sold 10 washers per bag$45.00 (RRP)$45.00 (RRP) -
Stock Code:WMBB-BB-29MM-0.5Stock Code:WMBB-BB-29MM-1.0Stock Code:WMBB-BB-29MM-2.5-5
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks.
- 29mm I.D.
- 2.5mm thick
- 5 spacers per bag
- Machined engineering-grade Delrin.Expected Date:02 November 2026$29.00 (RRP)$29.00 (RRP)$29.00 (RRP) -
Stock Code:WMTL-29SRAM-OB
29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg Bottom Bracket Press (PRESS-7, PRESS-7-PRO or PRESS-9-PRO)
Installs: 29X42 (DUB) bearing
Inner Step Outer Diameter: 41.8mm
Outer Diameter: 28.9mm
Thru Hole Diameter: 12.8mm (1/2")
Thickness: 7mm
Compatible with PRESS-7, PRESS-7-PRO or PRESS-9-PRO handles/rod.
Machined, red anodized aluminum
Sold individuallyExpected Date:02 November 2026$18.00 (RRP) -
Stock Code:WMBB-PF30-0.5MM-10Stock Code:WMBB-PF30-1.0MM-10
Used to adjust crank chainline or take up any slack when using 30mm, 24mm (Shimano, FSA, etc.) or 24/22mm (SRAM/TruVativ) Spindle Cranks in any BB30/PF30/BB86/92 or similare crank system.
- 24mm I.D. for use with cranks like Shimano HollowTech II, GXP, FSA
- 30mm I.D. for use with BB30 cranks
- 10 spacers per bag
- Machined engineering-grade DelrinExpected Date:02 November 2026Expected Date:02 November 2026$29.00 (RRP)$29.00 (RRP) -
Stock Code:WMBB-BB30-30-5MMStock Code:WMBB-BB30-30-10MM
Used to adjust crank chainline or take up any slack when using 30mm spindle cranks.
Inner Diameter: 30mm
Outer Diameter: 41.5mm
Thickness: 10mm
Sold Individually$13.00 (RRP)$19.00 (RRP) -
Stock Code:WMBB-386EVO-SHIMStock Code:WMBB-386EVO-SRAM
Wheels MFG 386EVO Adapter for Shimano Cranks (2x 24mm ID Adapters & 8x 0.7mm Spacers)
For adapting Shimano cranks to 386EVO-standard frames.$124.00 (RRP)$124.00 (RRP) -
Stock Code:WMBB-386EVOBB-SRAMACStock Code:WMBB-386EVOBB-SRAMBBStock Code:WMBB-386EVOBB-SHIMStock Code:WMBB-386EVO-BBStock Code:WMBB-386EVO-BB-ACStock Code:WMBB-386EVO-CER-ZEROStock Code:WMBB-386EVO-BB29MMStock Code:WMBB-386EVOBB-PRXStock Code:WMBB-386EVOBB-SHIMAC
Threaded BB for 386EVO frames. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance.
No more creaking. Smooth operation. Fast bearing replacement.
** Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29).**
Bearings: Enduro ABEC-3
Bottom Bracket/Frame Interface: BB386EVO
Bottom Bracket Shell Width (mm): 86.5mm
Bottom Bracket Shell I.D.: 46mm
Crank Spindle Diameter: 30mm
Weight: 126g
*Will accept 24mm and 24/22mm cranksets using Wheels Mfg. 386EVO BB / Crank AdaptersExpected Date:02 November 2026Expected Date:02 November 2026$259.00 (RRP)$235.00 (RRP)$225.00 (RRP)$235.00 (RRP)$259.00 (RRP)$445.00 (RRP)$235.00 (RRP)$235.00 (RRP)$259.00 (RRP) -
Stock Code:WMBB-PF30-SPEED-SEAL
42mm OD / 30mm ID Outer Seals (each)
Outer dust seal for 6806 bearings. 30mm inner diameter fits over 30mm diameter crank spindles. 42mm outer diameter covers the outer race of a 6806 bearing. This is a light duty dust seal with minimal sealing abilities. This seal is 1mm thinner than seals provided with our bottom brackets for 30mm diameter spindles.
- Inner Diameter: 30mm
- Outer Diameter: 42mm
- Thickness: 1.5mm
- Replacement seal for our BB86-30-BB and BB86-30-CER bottom brackets.
** Sold Individually
Note: Installl with the embossed lettering facing the bearing.$19.00 (RRP)Add To Cart
-
Stock Code:WMBB-SP0001
46mm inside diameter cup spacers that fit between a bottom bracket cup and the frame. Machined from 6061 aluminum and anodized black.
For Specialized road frames with the 61mm wide Carbon OSBB shell, you would place 3.5mm of spacers betwen each cup to effectively widen the BB shell to 68mm when used with non-Specialized cranks. One bag will properly space one 61mm wide Specialized OSBB shell to 68mm.
Bag Includes:
(2) - 2.5mm bottom bracket cup spacers (46mm ID)
(4) - 1.0mm bottom bracket cup spacers (46mm ID)$52.00 (RRP)Add To Cart
-
Stock Code:WMCE-CA0001
Precision-machined 4mm ID brass cable ferrules for improved shifting performance. A flat bottom on the inside prevents housing from pulling through ferrules. For use with most shifting cables.
- Inside Diameter: 4mm
- Outside Diameter: 5.75mm
- Overall Length: 12.7mm
- Color: Gold
- Material: Brass
- Bottle of 50pcs$48.00 (RRP)Add To Cart
