Wheels Manufacturing
-
Stock Code:WMWA-FTA-12-118-1.5Stock Code:WMWA-FTA-12-120-1.5Stock Code:WMWA-FTA-12-125-1.5Stock Code:WMWA-FTA-12-128-1.5Stock Code:WMWA-FTA-12-133-1.5Stock Code:WMWA-FTA-15-125-1.5Stock Code:WMWA-FTA-15-135-1.5Stock Code:WMWA-FTA-15-141-1.5Stock Code:WMWA-FTA-15-145-1.5Stock Code:WMWA-FTA-15-148-1.5Stock Code:WMWA-FTA-15-155-1.5Stock Code:WMWA-FTA-15-158-1.5Stock Code:WMWA-FTA-15-189-1.5Stock Code:WMWA-FTA-15-198-1.5Stock Code:WMWA-FTA1-15-135-1.5
Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
Â
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
Â
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.
Product features:
- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles
Tech Specs:
- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mmÂ
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USAExpected Date:02 November 2026Expected Date:02 November 2026$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$999.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$999.00 (RRP) -
Stock Code:WMDR-DER-SPCStock Code:WMDR-DER-SPC2$21.00 (RRP)$19.00 (RRP)
-
Stock Code:WMHB-HS-4Stock Code:WMHB-HS-5Stock Code:WMHB-HS-6$32.00 (RRP)$32.00 (RRP)$32.00 (RRP)
-
Stock Code:WMBR-FIT-BOT1
Wheels MFG Hayes Brake (& similar) Alloy & Brass bush Compession fittings Bottle 50 piece
$31.50 (RRP) -
Stock Code:WMTL-BP0008
The Headset Press Pro Install Kit is a robust, and easy to use tool. The kit includes a machined aluminum handle, 1/2" threaded rod, two machined aluminum drifts and the Adjustable Press Stop allowing for easy drift placement. One drift is machined with multiple steps to fit common head tube inner diameters listed in the Compatibility tab below. The other drift has two sizes to press in cups with either 1-1/8" or 1-1/2" bearings.
- Machined aluminum handle and drifts
- Red anodized drifts and handles
- Zinc-plated 1/2" diameter threaded rod
- Long threaded rod works with long head tubes up to 250mm
Includes
- 1 Head Tube Drift Includes
- 1 Headset Cup Drift
- 1 Adjustable Press Stop
- 1 Threaded handle Includes on 1/2"-13x17" UNC Threaded RodExpected Date:02 November 2026$279.00 (RRP) -
Stock Code:WMTL-TT-001
The Hootin Hauler Base and Trail Scraper, providing the foundation for every attachment in the ecosystem. Whether you're carrying tools, storing repair gear, or creating something entirely new, this is where the build starts.
This bolt-on platform gives you a clean, secure starting point for carrying ride essentials, then opens the door to a growing library of free downloadable 3D-print attachments built for customizing, creating, and making the setup your own. Free 3D Files available via the Wheels MFG website.
What's included:
- Hootin Hauler Base
- Trail Scraper – built to knock off sticky mud, clear packed jockey wheels, clean brake pads, and dig grime out of chainrings.
Why the Hootin Hauler stands out:
- Bolt-on platform for a clean, secure setup
- Fits underneath most water bottle cages
- Two side Accessory Mounts and one center 1" strap mount (strap not included)
- Designed for riders, makers, and tinkerers$29.00 (RRP)Add To Cart
-
Stock Code:WMTL-BP0005
Essential Bearing Press for installation of bearings with a minimum inner diameter of 10mm For use with 3/8" Press Rod and handles.
Includes:
- QTY 1 3/8 ACME THREADED ROD
- QTY 2 FAME LINKAGE STANDOFF 30mm QTY
- 2 THREADED HANDLE$138.00 (RRP)Add To Cart
-
Stock Code:WMTL-BP0002
Another indispensable tool for the professional bike shop. The Hub Bearing Press Pro Kit works with bearings that have an I.D. of 10mm or smaller (most front hub sealed bearing fall in this range).
Installs sealed bearing sizes
6801
6802
6803
6900
6901
R6
688
608
609
All parts are laser etched for easy identification.
Formerly Press-2
Includes
608 OPEN BORE 5mm x 2
608 OVER AXLE 5mm x 2
609 OPEN BORE 5mm x 2
609 OVER AXLE 5mm x 2
688 OPEN BORE 5mm x 2
688 OVER AXLE 5mm x 2
6801 OPEN BORE 5mm x 2
6801 OVER AXLE 5mm x 2
6802 OPEN BORE 5mm x 2
6802 OVER AXLE 5mm x 2
6803 OPEN BORE 5mm x 2
6803 OVER AXLE 5mm x 2
6900 OPEN BORE 5mm x 2
6900 OVER AXLE 5mm x 2
6901 OPEN BORE 5mm x 2
6901 OVER AXLE 5mm x 2
R6 OVER AXLE 5mm x 2
REAR QR SKEWER
All parts are laser etched for easy identification.$284.00 (RRP)Add To Cart
-
Stock Code:WMHB-JAR-PLUG
Wheels MFG Jar o' plugs Handlebar plugs 150 pce
-120 large plugs - 7/8" diameter
- 30 small plugs - 3/4" diameter$185.00 (RRP) -
Stock Code:WMTL-JAR-TIE$87.00 (RRP)
Add To Cart
-
Stock Code:WMFB-456-KITSS
Wheels MFG 456-KITSS Fastener Kit 4, 5 & 6mm Stainless Steel 218 piece
QTY DESCRIPTION
Bolts and Screws
8 M4 X 8 Socket Head Cap
8 M4 X 16 Socket Head Cap
4 M4 X 8 Flat Socket Head Cap
12 M5 X 12 Socket Head Cap
12 M5 X 10 Socket Head Cap
12 M5 x 8 Socket Head Cap
8 M5 X 16 Socket Head Cap
16 M5 X 16 Button Socket Head
4 M5 X 25 Socket Head Cap
4 M5 X 8 Flat Socket Head Cap
8 M5 X 12 Flat Socket Head Cap
8 M5 X 16 Flat Socket Head Cap
2 M6 X 20 Socket Head Cap
2 M6 X 35 Socket Head Cap
2 M6 X 45 Socket Head Cap
Nuts and Washers
8 M4 Flat Washer
20 M5 Hex Nut
10 M5 Nylock Nut
20 M5 Flat Washer
20 M5 Lockwasher
8 M6 Hex Nut
6 M6 Nylock Hex Nut
8 M6 Flat Washer
8 M6 LockwasherExpected Date:02 November 2026$192.00 (RRP) -
Stock Code:WMFB-5MM-KIT$336.00 (RRP)
Add To Cart
-
Stock Code:WMCG-LOCKRING*Was:$36.92 (RRP)Now:$19.80 (RRP)Price:$19.80 (RRP)
Add To Cart
-
Stock Code:WMCG-LOCKRINGCA*$47.79 (RRP)
Add To Cart
-
Stock Code:WMDH-M3-10FS
Replacement M3 x 10 Flat Head Screw fastener for derailleur hangers.
Thread: M3-0.5
Overall Length: 10mm
Material: Steel
Use with 2mm hex wrench
Bag of 5$7.00 (RRP) -
Stock Code:WMDH-M4-12FS
Replacement M4 x 10 Flat Head Screw fastener for derailleur hangers.
Thread: M4-0.7
Overall Length: 12mm
Material: Steel
Use with 2.5mm hex wrench
Bag of 5$7.00 (RRP)Add To Cart
-
Stock Code:WMFW-M5-FWSS$23.00 (RRP)
Add To Cart
-
Stock Code:WMFN-M5-SSNUTStock Code:WMFN-M6-SSNUT$26.78 (RRP)$44.78 (RRP)
-
Stock Code:WMFB-M5-10BHSS
M5x10mm Button Head Screw Stainless Steel (10 Pieces)
-work with disc brake rotors$49.00 (RRP)Add To Cart
-
Stock Code:WMDH-M5-10SHSS-DROP
Replacement M5 x 10 Socket Head Screw fastener for derailleur hangers.
Thread: M5-0.8
Overall Length: 10mm
Material: Steel
Use with 4mm hex wrench
Bag of 5$5.00 (RRP)Add To Cart
-
Stock Code:WMFB-M5-12BHSS
M5x12mm Button Head Stainless Steel (10Pieces)
Thread Size: M5x0.8mm
Length (mm): 12mm Length Under Head
Material: Stainless Steel
Hex Key Size: 3mm$49.00 (RRP)Add To Cart
-
Stock Code:WMFB-M5-16BHSS$59.00 (RRP)
Add To Cart
-
Stock Code:WMFB-M5-08SHSSStock Code:WMFB-M5-16SHSSStock Code:WMFB-M5-20SHSSStock Code:WMFB-M5-25SHSSStock Code:WMFB-M6-10SHSS$43.00 (RRP)$55.00 (RRP)$59.00 (RRP)$59.00 (RRP)$24.00 (RRP)
