Thomson
-
Stock Code:TNSP-H005BKStock Code:TNSP-H005SV$39.00 (RRP)$39.00 (RRP)
-
Stock Code:TNHB-HB-E120Stock Code:TNHB-HB-E121
Our aluminum drop bars bring the performance, and dependability you have come to expect from Thomson. The lineup is available in 3 profiles, and varying widths. Each made from 7000 series aluminum. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.
Our road bar wing section is small enough not to restrict hand movements when riding on the top, and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.
The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm
The round profile is available in 38mm, 40cm, 42cm, and 44cm, Drop 147mm, Reach 72mm
The Dirt drop is available in 44cm, and 46cm, a wide drop bar with 25° flare ready for your next adventure, regardless of the road you choose.$215.00 (RRP)$215.00 (RRP) -
Stock Code:TNHB-HB-E107
Our road bar features a mild wing shape on top, clamping area wide enough for aero bars, mid-compact reach and drop. This is the modern bar for the modern road bike. Our Road bar wing section is small enough not to restrict hand movement when riding on the top and allows bar angle adjustment with out “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.
Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed.
All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus.
Both the Road and Cross bar are made in one piece, not three pieces co-molded and glued together.
Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders.
1.5K woven impact ends help prevent damage to uni-directional fibers from impact.
Reach 78.5mm.
Drop is proportional. Road drops are: 40CM 137mm, 42CM 140mm, 44CM 140mm, 46CM 143mm$390.00 (RRP)Add To Cart
-
Stock Code:TNHB-HB-E123
Our aluminum drop bars bring the performance, and dependability you have come to expect from Thomson. The lineup is available in 3 profiles, and varying widths. Each made from 7000 series aluminum. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.
Our road bar wing section is small enough not to restrict hand movements when riding on the top, and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.
The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm
The round profile is available in 38mm, 40cm, 42cm, and 44cm, Drop 147mm, Reach 72mm
The Dirt drop is available in 44cm, and 46cm, a wide drop bar with 25° flare ready for your next adventure, regardless of the road you choose.Was:$230.00 (RRP)Now:$165.00 (RRP)Price:$165.00 (RRP) -
Stock Code:TNSP-SP-H001$8.00 (RRP)
Add To Cart
-
Stock Code:TNCL-SG1-LXLStock Code:TNCL-SG1-2X
Thomson collaborated with SockGuy® to offer a comfort wool, performance sock.
XXL: US13-16$25.00 (RRP)$25.00 (RRP) -
Stock Code:TNST-SM-H001-BK$8.00 (RRP)
-
Stock Code:TNST-SM-A002
Thomson stem Shim 1-1/8" to 1" 39-40mm
SM-A002 is a 1” to 1 1/8” shim that is 40mm tall. This shim is originally made for the 25.4 and 26.0 Elite stems. It is too tall to be used with X4 or X2 without putting spacers on top of the stem.$24.00 (RRP)Add To Cart
-
Stock Code:TNCL-TS-GILDAN-GR-LGStock Code:TNCL-TS-GILDAN-OR-LGStock Code:TNCL-TS-GILDAN-PU-LGStock Code:TNCL-TS-GILDAN-GR-MDStock Code:TNCL-TS-GILDAN-OR-MDStock Code:TNCL-TS-GILDAN-PU-MDStock Code:TNCL-TS-GILDAN-GR-SMStock Code:TNCL-TS-GILDAN-OR-SMStock Code:TNCL-TS-GILDAN-PU-SMStock Code:TNCL-TS-GILDAN-GR-XLStock Code:TNCL-TS-GILDAN-OR-XLStock Code:TNCL-TS-GILDAN-PU-XL$35.00 (RRP)$35.00 (RRP)$35.00 (RRP)$35.00 (RRP)$35.00 (RRP)$35.00 (RRP)$35.00 (RRP)$35.00 (RRP)$35.00 (RRP)$35.00 (RRP)$35.00 (RRP)$35.00 (RRP)
-
Stock Code:TNCL-RAGLAN-WB-LGStock Code:TNCL-RAGLAN-WB-MDStock Code:TNCL-RAGLAN-WB-XL$50.95 (RRP)$50.95 (RRP)$50.95 (RRP)
-
Stock Code:TNSP-SP-T102
The adjustability and strength of a Thomson seatpost, now in Titanium.
Our proven saddle clamps are paired with Titanium hardware. We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least .500 inches shorter than our grip length.
The Thomson seatpost has a clamp, head, and upper tube are strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.
The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.
Infinite tilt adjustment minus 5° and plus 29°.
Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails.
The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.$499.00 (RRP) -
Stock Code:TNHB-HB-E113
Titanium gives you a ride quality unavailable in other materials. Thomson manufacturing gives you light weight and no shims at the stem clamp. Two sweeps are available in the flat bar design and a riser bar is also available.
15mm Riser 8° Back 4° Up 31.8mm 780mm
345 grams$550.00 (RRP) -
Stock Code:TNHB-HB-E118
The Thomson aluminum trail bar is 750mm wide with 20mm of rise, 8° of backsweep and 5° of upsweep. The clamping area is 50mm allowing a different bend profile for a more compliant ride. The Trail bar gives you a light aluminum all-around bar for your Mountain Bike.
$199.00 (RRP) -
Stock Code:TNHB-HB-E117
750mm wide and offers 15mm of rise together with a 5° backsweep and 8° upsweep. Built for strength with enough flex built in for all day comfort. Strong enough for All Mountain/Freeride, light enough for racing.
Bars are made with three different fiber types with different tensile strength and tensile modulus, including High Strength carbon fibers. This helps to allocate stiffness and flex where needed.
Bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders.
All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus.
1.5K woven impact ends help prevent damage to uni directional fibers from shortening the bar or impact with the ground.
Weight 215g
*NOT SUITABLE FOR BAR ENDS.Was:$320.00 (RRP)Now:$242.00 (RRP)Price:$242.00 (RRP)Add To Cart
-
Stock Code:TNST-SM-H008BLKStock Code:TNST-SM-H008SIL$25.00 (RRP)$25.00 (RRP)
-
Stock Code:TNST-SM-H007BLKStock Code:TNST-SM-H007SLV$25.00 (RRP)$25.00 (RRP)
-
Stock Code:TNST-SM-H009$66.14 (RRP)
-
Stock Code:TNST-DMB040Stock Code:TNST-DMB050
Direct Mount Stems allow riders the ultimate in stiffness for dual crown cockpits. The strongest stem we make, which means it’s the strongest stem you can get. Built for any fork using the BoXXer® bolt pattern including: Rock Shox Boxxer, Fox F40, Manitou Dorado and Marzocchi (2012 forward).
Motorcycle Style, Thomson Strength and attention to detail.
Our 40mm Direct Mount has 30 degrees of rise.
65mm Wide handlebar clamp width for maximum torsional stiffness, which translates into better steering precision.$180.00 (RRP)$180.00 (RRP) -
Stock Code:TNST-SB-SKBLUStock Code:TNST-SB-SKBPRStock Code:TNST-SB-SKGLDStock Code:TNST-SB-SKGRNStock Code:TNST-SB-SKORNStock Code:TNST-SB-SKRED
Looking to add a touch of bling to your ride and stand out on the road? We’ve got you covered. Enhance the aesthetics of your X4 stem with our stylish bike dress-up kit. Choose from anodized sets in Blue, Gold, and Red, or explore our latest additions—Cerakote finish in vibrant Bright Purple, Green Mamba, and Hunter Orange. Stay tuned for more color additions.
Includes:
(1) 1 1/8" Top Cap, (1) Handlebar Clamp, (6) Black Bolts, (6) Silver Bolts$69.00 (RRP)$92.00 (RRP)$69.00 (RRP)$92.00 (RRP)$92.00 (RRP)$69.00 (RRP) -
Stock Code:TNHB-HB-E116
A flat bar with an off center clamp area allowing a flat riding position and reversible for an 8mm drop for 29 inch bikes. 8° of backsweep for comfort. 730mm (29?) in width for plenty of leverage.
Bars are made with three different fiber types with different tensile strength and tensile modulus, including High Strength carbon fibers. This helps to allocate stiffness and flex where needed.
Bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders.
All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus.
1.5K woven impact ends help prevent damage to uni directional fibers from shortening the bar or impact with the ground.
Weight 185g
*NOT SUITABLE FOR BAR ENDS$320.00 (RRP) -
Stock Code:TNHB-HB-E108
Titanium gives you a ride quality unavailable in other materials. Thomson manufacturing gives you light weight and no shims at the stem clamp. Two sweeps are available in the flat bar design and a riser bar is also available.
$399.00 (RRP)
