Thomson Road Carbon 46cm
Description
Our road bar features a mild wing shape on top, clamping area wide enough for aero bars, mid-compact reach and drop. This is the modern bar for the modern road bike. Our Road bar wing section is small enough not to restrict hand movement when riding on the top and allows bar angle adjustment with out “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.
Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed.
All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus.
Both the Road and Cross bar are made in one piece, not three pieces co-molded and glued together.
Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders.
1.5K woven impact ends help prevent damage to uni-directional fibers from impact.
Reach 78.5mm.
Drop is proportional. Road drops are: 40CM 137mm, 42CM 140mm, 44CM 140mm, 46CM 143mm
Webshops and Bike shops
You may also be interested in...
-
Stock Code:TNHB-HB-E128
Thomson Cyclocross 42x31.8 Carbon
Clipon compatible keep all accessory clamps inside the area marked on the bar as safe for clamping. 90mm total safe clamp area available.
For Cyclocross we present the carbon CX bar. The natural transition from your Thomson road bar for the ‘cross season. Twin flats on the bottom of the bar allow taping your housing to create a completely round bar when wrapped. Top profile is round and as wide as possible. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands.
Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed.
All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus.
Both the Road and Cross bar are made in one piece, not three pieces co-molded and glued together.
Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders.
Reach 78.5mm. Drop is proportional.
Cross drops are: 40CM 131mm, 42CM 133mm, 44CM 135mm.$355.00 (RRP) -
Stock Code:TNHB-HB-E117
750mm wide and offers 15mm of rise together with a 5° backsweep and 8° upsweep. Built for strength with enough flex built in for all day comfort. Strong enough for All Mountain/Freeride, light enough for racing.
Bars are made with three different fiber types with different tensile strength and tensile modulus, including High Strength carbon fibers. This helps to allocate stiffness and flex where needed.
Bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders.
All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus.
1.5K woven impact ends help prevent damage to uni directional fibers from shortening the bar or impact with the ground.
Weight 215g
*NOT SUITABLE FOR BAR ENDS.Expected Date:15 October 2026$320.00 (RRP) -
Stock Code:WSHB-HB0362
Whisky’s all-carbon Spano Drop Handlebar is designed to give gravel and all-road riders the most natural hand positions anywhere on the bar. A multi-stage flare puts the hoods at an optimal angle for comfort while maximizing control through the drops. The bar’s flat top promotes flex and offers relief from rough surfaces, and its 31.8 clamp diameter with 90mm width allows compatibility with bar-mounted accessories.
- Compound flare — 12 degrees at the hoods and 20 degrees through the drops
- Drop/Reach: 100mm/68mm
- 31.8 clamp diameter
- Di2 compatible with bar end junction for 1x drivetrain setups$525.00 (RRP)POA -
Stock Code:RSHBRS-62-01
Really wide handlebars need really long tape. Stop struggling with standard length tape and treat yourself to some Really Long Tape.
- Really long - wrap the widest bars
- Did we mention just how long it is? There's enough tape to cover the widest Kitchen Sink Handlebar, with Cruise Control Grips installed, as well as the endurance loop.
- Anti-vibration padding
- Durable compound maintains grip even when wet
- 315 cm length (standard tape is 180-200 cm)
- 3mm thick with specially formulated advanced PU outer$79.99 (RRP)Add To Cart
-
Stock Code:RSHBRS-64-09Stock Code:RSHBRS-64-10Stock Code:RSHBRS-64-01Stock Code:RSHBRS-64-04Stock Code:RSHBRS-64-02Stock Code:RSHBRS-64-05Stock Code:RSHBRS-64-03Stock Code:RSHBRS-64-06Stock Code:RSHBRS-64-07Stock Code:RSHBRS-64-08
The Top Shelf Handlebar raises your position by 50 or 70mm to give you an ultra-comfortable upright riding position and easy reach to the drops. It features the same backsweep, flare and compact drop as our best-selling Kitchen Sink Handlebars, so you can stay comfortable and in control no matter the terrain.
The patent-pending design features a unique double-bar construction, which allows for easy, secure mounting of bags and accessories. Configure the perfect set-up for anything from an afternoon gravel adventure to an epic multi-day bikepacking trip.
KEY Handlebar Features:
RISE - 50 or 70mm (2 or 2.75in) of rise creates a more upright and comfortable riding position without the use of a highly angled stem or excessive headset spacers. This allows riders to achieve a more upright, relaxed fit while maintaining traditional drop-bar bike geometry.
CONTROL - Take advantage of the drops. The higher positioning of the drops provides a comfortable and secure hand position, giving you control to navigate rough terrain and steep descents. This keeps your body weight centered, while reducing neck and back strain.
BACKSWEEP - 7° degrees of backsweep orients the bar where your hands want to be. Whether you're on the flats, the hoods, or the drops, you’re getting an ergonomic position for your most epic gravel rides.
FLARE - 25° degrees of flare and a compact drop means a stable, aerodynamic drop position that is actually comfortable enough to use on your longest gravel ride or your next bikepacking trip.
FULL RANGE OF WIDTHS - 41, 44, 47, 50, and 53cm widths.
STORAGE - the unique double-bar construction provides room for all of your bar-mounted accessories. Mount handlebar bags (like our custom-fitted Top-Shelf Handlebar Bag which is now available) securely, without flopping around like they do on a standard handlebar.
Perfect for road, gravel, bikepacking, and commuting.
Why are Your Riser Handlebars Flared?
Our handlebars are designed to seek a balance between the traditional wide flat bars which offer stability and control over rough terrain and the comfort and speed of road bike drop bar position without sacrificing control. The Top Shelf Handlebars are flared in the drops to give the rider a stable and more controllable riding position that is essential for gravel biking terrain. This combination of comfort and control allows you to ride longer, further and faster and is especially well-suited to long distance multi-day, week or even months long bikepacking rides.Expected Date:16 October 2026$249.99 (RRP)$249.99 (RRP)$249.99 (RRP)$249.99 (RRP)$249.99 (RRP)$249.99 (RRP)$249.99 (RRP)$249.99 (RRP)$249.99 (RRP)$249.99 (RRP)
