Soma
-
Stock Code:SMBT23511Stock Code:SMBT23513Stock Code:SMBT23514Stock Code:SMBT23527
This tape is classic. In the 70's and 80's Benotto Handlebar tape was the tape to have on racing bikes. If you're going for a vintage look-pick up a pack of this light-weight plastic tape. Comes in 16 colors with silver plugs AND matching end caps.
.$22.99 (RRP)$22.99 (RRP)$22.99 (RRP)$22.99 (RRP) -
Stock Code:SMBL132301Stock Code:SMBL132302Stock Code:SMBL132303Stock Code:SMBL132304Stock Code:SMBL132307Stock Code:SMBL132308Stock Code:SMBL132312Stock Code:SMBL132305Stock Code:SMBL132306
The E-ne is positionable on top of the bar or in front of the bar. Its aesthetic is a little more rustic than slick, but it looks great and sounds great.
- Fits 22.2-31.8mm bars
- Available in a variety of different colours.
- Made in Japan$48.67 (RRP)$48.67 (RRP)$43.26 (RRP)$43.26 (RRP)$48.67 (RRP)$48.67 (RRP)$43.26 (RRP)$48.67 (RRP)$48.67 (RRP) -
Stock Code:SMBL13179Stock Code:SMBL13180Stock Code:SMBL13181
We think these are some of the finest bells available. Timeless retro designs, unchanged for decades. The brass offers a louder and clearer tone than the alloy. Made in Japan. Fits bars with 22 and 24mm diameter (i.e. mtn. bar and road bars)
.$34.48 (RRP)$29.37 (RRP)$22.99 (RRP) -
Stock Code:SMBL13186Stock Code:SMBL13187Stock Code:SMBL13188Stock Code:SMBL13189
- 45mm chrome-plated brass dome with coil spring striker
- Ahead stem top cap mount fits 1-1/8" steerers for clean look
- Made in Japan$28.12 (RRP)$28.12 (RRP)$28.12 (RRP)$28.12 (RRP) -
Stock Code:SMBL13190Stock Code:SMBL13191Stock Code:SMBL13192Stock Code:SMBL13193
- Mini version of Suzu Bells
- Strong retro appeal
- Spring-loaded lever strike mechanism
- Smaller 45mm alloy dome and curvier lever strike hammer than the larger Suzu
- Steel clamp fits 26.0 to 22.2
- Made in Japan$28.12 (RRP)$28.12 (RRP)$28.12 (RRP)$28.12 (RRP) -
Stock Code:SMBL13165Stock Code:SMBL13194Stock Code:SMBL13195
- Slightly larger than the Suzu Bell
- Attention-getting chime even in heavy traffic
- Brass dome
- Metal levers
- Fits both 26.0 and 25.4 diameter handlebars
.$47.27 (RRP)$30.28 (RRP)$30.28 (RRP) -
Stock Code:SMBL13182Stock Code:SMBL13183Stock Code:SMBL13185
We think these are some of the finest bells available. Timeless retro designs, unchanged for decades. The brass offers a louder and clearer tone than the alloy. Made in Japan. Fits bars with 22 and 24mm diameter (i.e. mtn. bar and road bars)
.$29.37 (RRP)$22.99 (RRP)$28.12 (RRP) -
Stock Code:SMBL-C0001Stock Code:SMBL-C0002Stock Code:SMBL-C0003Stock Code:SMBL-C0004
Constructed and hand-painted in Japan. 4 Colours to choose from.
- Alloy dome hand-painted with Japanese design
- Spring-loaded lever strike mechanism
- Redesigned clamp fits bar diameters ranging from 22.2mm to 26.0mm
- Measures 55mm in diameter
- All metal construction with durable plated steel clamp and striker$30.28 (RRP)$30.28 (RRP)$30.28 (RRP)$30.28 (RRP) -
Stock Code:SMBL-CR-RBS-ABKStock Code:SMBL-CR-RBL-ABKStock Code:SMBL-CR-RBS-GLStock Code:SMBL-CR-RBL-GL
Compact and sleek teardrop shape bell. Lightweight polycarbonate 2-piece clamp.
Two Clamp sizes:
Large is for 31.8mm bar bulge and installing over bar tape/cables.
Small is for riser and townie bars. (22- 25.4mm)$43.26 (RRP)$43.26 (RRP)$43.26 (RRP)$43.26 (RRP) -
Stock Code:SMFD25200
These do not come pre-drilled (similar to Honjos) so you need to be handy. Includes all hardware including daruma screws and leather washers.
.$338.48 (RRP)Add To Cart
-
Stock Code:SMDR53102
Old road frames with a braze-on derailleur mount were designed for large road rings. They aren't compatible with sub-compact chainrings
This adapter for the frame front derailleur braze-on allows you to mount your derailleur lower to get it to work with smaller chainrings.$68.89 (RRP)Add To Cart
-
Stock Code:SMBL13113Stock Code:SMBL13112
Designed with road drop bars in mind. It can mount on the brake hood, on cable housing, and on some flat bar levers (levers need to have flat section less than 9mm deep.) Reversible for right and left hand use. This is a not spring-loaded clip; it clamps on with a screw; just turn the bell dome to loosen and tighten.
$30.28 (RRP)$31.36 (RRP) -
Stock Code:SMFK23319
This is an ideal carbon fork for the Soma Wolverine thanks to similar rake and length. Also idea for CX and gravel bikes with a 71.5 - 72 degree head angle. If you are going from a 44mm rake CX fork to this, it might speed up your steering a hair.
- IS disc mount
- 400mm axle to crown
- 48mm rake
- 1-1/8" alloy steerer (300mm) - 45mm max tire width
- Weight: 755g$599.00 (RRP)Add To Cart
-
Stock Code:SMBT26512Stock Code:SMBT26513$194.87 (RRP)$194.87 (RRP)
-
Stock Code:SMRR45490
Soma B-Line Tire 650Bx38c Skinwall
- Has a standard nylon casing and offers a true 38mm width.
- Raised Pasela tread pattern
- Skinwall with black tread
- Made in Japan$89.00 (RRP)Add To Cart
-
Stock Code:SMFR90960Stock Code:SMFR92360Stock Code:SMFR90958
Soma B-Side 650b MTB Frame
• Tange Prestige heat treated CrMo steel front triangle; butted CrMo rear end
• Geometry designed to accommodate a 100-120mm travel fork
• Int’l disc brake tabs (rear)
• Tange Stainless Steel Sliding Dropouts for geared or single speed set-ups
• Machined 44mm headtube (fits tapered steerer tubes using a ZS top assembly and 40.EC44 external cup lower assembly; fits 1-1/8” steerers using a ZS44 headset)
• Fiery Red$1,149.00 (RRP)$1,099.00 (RRP)$1,149.00 (RRP) -
Stock Code:SMHB26040
Alternative MTB handlebar similar to our Clarence Bar, but with a little more backsweep in the grip and a wider straight section in the middle (for attaching accessories). Multiple hand positions for comfort.
• 6061 T6 Aluminum
• 710mm width
• 12mm rise
• 40° bend at the grip
• 135mm staight section at the center
• 31.8mm$149.00 (RRP)Add To Cart
-
Stock Code:SMBT26411
Thick and Zesty with a striated texture (for extreme grip)!
. Comfy, 2.5mm thick, shock absorbent, and secure feeling.
Primary material is a special formulation of EVA (ethylene vinyl acetate)resin. This material is the result of extensive testing to make sure it has the right balance of strength and stretchiness, that it absorbs vibration, is oxidation resistant, and is water resistant, but does not get slippery in the rain. More environmentally-friendly material than PVC. Its production does not result in heavy metal waste.$42.18 (RRP)Add To Cart
-
Stock Code:SMFD25404
Chromoplastic bicycle fenders with alloy core and rubber mud flaps. Features European-inspired Break Away brackets which help reduce accidents in case foreign objects ride up between wheel and fender.
- Stays are height adjustable by 2cm
- Stainless steel hardware
- Width: 37mm$88.12 (RRP) -
Stock Code:SMBC141010
The Soma Fabrications Further is the largest water bottle designed to fit a standard water bottle cage! More water means more riding. A must-have for those who do super-long rides and don't like hydration packs.
• 38 oz. capacity (1,120 mL)
• Graduation marks to assist with hydration mixes
• Easy to grip
• Easy to squeeze LDPE plastic
• High flow sip valve
• 30mm tall (11-5/8")
• Frosted Clear allows you to view how much liquid you still have$40.00 (RRP)Add To Cart
-
Stock Code:SMBR73235Stock Code:SMBR73236$45.00 (RRP)$45.00 (RRP)
-
Stock Code:SMDH94848
Aluminum sliding insert for IRD Broski dropouts. Right side. Fits DTSwiss style 142 x 12mm thru-axle. 1.0 thread pitch
POA -
Stock Code:SMDH94847
Aluminum sliding insert for IRD Broski dropouts on Wolverine 3.0 and 2018 Juice and Riff frames. Left side. Fits 142mm x 12mm thru axle. IS disc mounts.
(Does not work with the IRD/Tange Sliding Dropout on older pre-2017 Wolverines, B-Sides, Analogs and Juices)POA
