Soma ClarenceII Cletus Ends Black 31.8mm
Description
We have added adjustable extensions to our Clarence alt MTB handle bar.
These horns and clamps are not fixed, so you can rotate them so they point toward each other or turn up. Swapping the clamps to the opposite side will yield a different extension position.
- 6061-T6 aluminum
- 34° back sweep
- 19° upsweep
- 37mm rise
- 670mm width
- 31.8mm center
- 22.2mm ends
Webshops and Bike shops
You may also be interested in...
-
Stock Code:TNHB-HB-E128
Thomson Cyclocross 42x31.8 Carbon
Clipon compatible keep all accessory clamps inside the area marked on the bar as safe for clamping. 90mm total safe clamp area available.
For Cyclocross we present the carbon CX bar. The natural transition from your Thomson road bar for the ‘cross season. Twin flats on the bottom of the bar allow taping your housing to create a completely round bar when wrapped. Top profile is round and as wide as possible. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands.
Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed.
All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus.
Both the Road and Cross bar are made in one piece, not three pieces co-molded and glued together.
Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders.
Reach 78.5mm. Drop is proportional.
Cross drops are: 40CM 131mm, 42CM 133mm, 44CM 135mm.$355.00 (RRP) -
Stock Code:WMHB-HS-5$32.00 (RRP)
-
Stock Code:TNHB-HB-E120Stock Code:TNHB-HB-E121
Our aluminum drop bars bring the performance, and dependability you have come to expect from Thomson. The lineup is available in 3 profiles, and varying widths. Each made from 7000 series aluminum. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.
Our road bar wing section is small enough not to restrict hand movements when riding on the top, and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.
The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm
The round profile is available in 38mm, 40cm, 42cm, and 44cm, Drop 147mm, Reach 72mm
The Dirt drop is available in 44cm, and 46cm, a wide drop bar with 25° flare ready for your next adventure, regardless of the road you choose.$215.00 (RRP)$215.00 (RRP) -
Stock Code:SLHB-HB6300
In today’s fast-paced world of riseless flat bars and far-too-aggressive-for-our-liking cock pits, we harken back to simpler times. We wanted a handlebar that would suffice for a relaxed cruise to a favorite windowless bar, but would also be suitable should a person decide to take the long way home. The Sunrise Bar is a cruiser bar, a trail bar, and a BMX bar all rolled into one. It has a 22.2mm clamp diameter, but we included some Problem Solvers shims so you can mount it up to your fancy 31.8mm stem.
Material: CroMoly steel
Clamp diameter: 22.2mm; Includes shims for 31.8mm clamp
Width: 820mm; Can be cut to 720mm
Rise: 83mm
Sweep Angle: 14.7 degree backsweep, 6.7 degree upsweep
Weight: 778g including shims
Color: Black$155.00 (RRP)POA -
Stock Code:SAHB-HB8261Stock Code:SAHB-HB8263
Salsa Cowbell Drop Handlebars. 12 degree flare at the drops. Curve designed for smooth transition to the hoods of current integrated shift/brake levers.
- Top radius allows comfortable hand positions all the way across, while maintaining short reach
- 6061-T6 Double butted alloy
- Designed to allow a flat transition between handlebar and brake lever
- Flattened indentation for cable routing
- 12 degree outward bend in the drops is great for gravel riding and cross racing
- 120mm wide center section for mounting accessories$121.13 (RRP)POAPOA
