WOLF TOOTH
-
Stock Code:WTCLBEANIE-LOGO-BLK
Seamless stretch Microfiber beanie that fits under a helmet and long enough to cover your ears. These were produced by Boulder, Colorado based Pandana.
Features:
- Fits under a helmet or can be worn alone
- Moisture-wicking and breathable
- Quick-drying
- Lightweight and packable
- 100% Seamless Polyester Microfiber
- Double layer SPF 50+
- Soft and comfortable$46.35 (RRP)Add To Cart
-
Stock Code:WTCLLSTLGStock Code:WTCLLSTMDStock Code:WTCLLSTSM
The long sleeve version of our logo T-shirts. These super soft American Apparel shirts are made from 100% combed cotton.
$70.00 (RRP)$70.00 (RRP)$70.00 (RRP) -
Stock Code:WTCLT2XLStock Code:WTCLTLGStock Code:WTCLTMDStock Code:WTCLTSMStock Code:WTCLTXL
We are picky about what we wear so we sifted through the hundreds of race/ride shirts we owned. The American Apparel 50/50 blend, a top shelf expensive but awesome t-shirt, came out on top as our favorite.
$60.00 (RRP)$60.00 (RRP)$60.00 (RRP)$60.00 (RRP)$60.00 (RRP) -
Stock Code:WTCLHat-BLK-LogoTrucker$60.00 (RRP)
Add To Cart
-
Stock Code:WTCTLONEWOLF-BRAZE-LStock Code:WTCTLONEWOLF-BRAZE-MStock Code:WTCTLONEWOLF-BRAZE-H
LOW SWEEP for 34-52T chainrings.
The new LoneWolf Aero Chainguide prevents dropped chains on road, gravel, and CX bikes with 1x drivetrains. This chainguide has been tested and developed with Team Jumbo-Visma, has been trusted in road cycling’s biggest races, and ridden to victory in the 2023 Giro d'Italia. LoneWolf Aero Chainguide was also ridden to victory through truly epic conditions at Unbound Gravel 2023.
We think of this little chainguide as 30g of insurance for races where a dropped chain could cost you a shot at the podium. The LoneWolf Aero Chainguide is similar to our existing GnarWolf, and combines a low profile head that only covers the top and inboard side of the chain with our GuideLock quick adjustment system. This eliminates the need for shims and gives you security in a light, easy to use, and aerodynamically optimized chainguide solution.
• Compatible with bikes that have a braze-on front derailleur mount
• Only for use with 1x drivetrains
• Works with round or oval chainrings
• Three base sweep options for chainring sizes ranging from roughly 38T-62T based on frame; Low sweep for smaller chainrings in that range will be most popular
• Head has 8mm of adjustment for chainline via our GuideLock quick adjustment system$90.00 (RRP)$90.00 (RRP)$90.00 (RRP) -
Stock Code:WTCTLONEWOLF-CV-PROStock Code:WTCTLONEWOLF-CV-LOWStock Code:WTCTLONEWOLF-CV-MID
The Wolf Tooth LoneWolf Aero Chainguide for Cervelo prevents dropped chains on select Cervelo models when equipped with a 1x drivetrain. This product has been tested and developed alongside Team Jumbo-Visma, who have been racing with this in some of road cycling’s biggest races, winning the Maglia Rosa in the 2023 Giro d'Italia.
Compatibility
• Chainring Compatibility - Mid Sweep 48-52T round chainrings
• Compatible with Cervelo S5 and P5 bikes that have a braze-on front derailleur mount
• Mounts directly to the frame in place of the braze-on
• Only for use with 1x drivetrains
• Head has 8mm of adjustment for chainline via our GuideLock quick adjustment system
Note: Braze-on mount is not at the same height on all bikes so max chainring size will vary somewhat depending on frame brand and modelExpected Date:18 December 2025$120.00 (RRP)$120.00 (RRP)$120.00 (RRP) -
Stock Code:WTBTCAM-FATPAW-MEGA-BLK
Ergonomic grips with this unique cam profile lets you choose the position that best supports your hand position and style of riding. The 11.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands.
- 40mm installed diameter make these the thickest silicone foam grips available on the market
- 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability
- Tacky texture provides excellent grip with or without gloves in all weather conditions
- Ergonomic shape makes for a reduced circumference compared to non-faceted grips, providing padding and comfort only where you need it
- Facets create four edges on grips, which makes for additional points of contact for your hands and added grip
- Includes bar end plugsExpected Date:18 December 2025$70.00 (RRP) -
Stock Code:WTBT-FATPAW-MEGA-BLK
Mega Fat Paw grips were developed for riders who crave large-diameter grips that also have a soft feel. The 11.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands.
- 40mm installed diameter–handlebar diameter included–make these the thickest silicone foam grips available on the market
- 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability
- Tacky texture provides excellent grip with or without gloves in all weather conditions
- Includes bar end plugs$70.00 (RRP)Add To Cart
-
Stock Code:WTBCMORSE-SS-WT
The Wolf Tooth Morse Cage is a versatile stainless steel bottle cage with a unique base plate that allows you to reposition the bottle placement on your bike. Named for its dot-dash-dot-dash mounting pattern, the Morse Cage base plate offers four positions that align with your bike’s bottle bosses. Each of the four mounting options has a “dot” paired with a “dash” that ensures your bottle is securely mounted and won’t move. This gives you the option of up to 32mm of vertical adjustment of bottle cage positioning.
- Hand-bent hollow tubing
- Fits any frame that has a standard bottle cage mount with bolt spacing of 64mm (most modern frames)
- Made in our Minnesota machine shop
- Versatile option for bikes with multiple bottle cage mounts, full-suspension frames, smaller frames, and bikes with any size of frame bag
- Compatible with Wolf Tooth B-RAD Mounting Bases to adjust bottle positioning even furtherExpected Date:18 December 2025$64.00 (RRP) -
Stock Code:WTBC-MORSE-TI
The Wolf Tooth Morse Cage is the result of a collaboration between Wolf Tooth and King Cage with a goal of providing a lightweight and low profile way to reposition bottle cages. Named for its dot-dash-dot-dash mounting pattern, the Morse Cage base plate offers four positions across 32mm of vertical adjustment, fully capturing one mounting bolt in every position to prevent movement. Handcrafted by King Cage in Durango, Colorado, the Morse Cage will never mar your bottles, can be bent back into shape if damaged, and are available now in both titanium and stainless steel.
- Hand bent hollow tubing
- Precision-cut four-position bases with 32mm of total adjustment$142.89 (RRP) -
Stock Code:WTCHOVAL-SH11038-GRStock Code:WTCHOVAL-SH11042-GRStock Code:WTCHOVAL-SH11046-GR
These chainrings are for Shimano GRX cranks. They feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. The newly updated tooth profile works with SRAM Flattop chain in addition to other 9, 10, 11, and 12 spd chains (except Shimano HG+ 12 speed chain).
Compatibility
- Shimano GRX cranksets including RX600 and RX810
- Drop-Stop® FT tooth profile is compatible with SRAM Flattop chain
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile provides the ultimate chain retention and mud shedding ability$182.00 (RRP)$180.00 (RRP)$190.00 (RRP) -
Stock Code:WTCHOVAL-RFC30Stock Code:WTCHOVAL-RFC30-BSTStock Code:WTCHOVAL-RFC30-BST-SH12Stock Code:WTCHOVAL-RFC30-BST-BStock Code:WTCHOVAL-RFC32-BSTStock Code:WTCHOVAL-RFC32-BST-SH12Stock Code:WTCHOVAL-RFC32-BST-BStock Code:WTCHOVAL-RFC34-BSTStock Code:WTCHOVAL-RFC34-BST-SH12Stock Code:WTCHOVAL-RFC34-BST-BStock Code:WTCHOVAL-RFC36-BSTStock Code:WTCHOVAL-RFC36-BST-BStock Code:WTCHOVAL-RFC40-BST
Elliptical Direct Mount Chainring for Race Face Cinch Standard / 6mm Offest (142mm)
Compatibility
- Any Race Face Cinch(TM) system crankset (including Next SL, Sixc, Turbine, Aeffect)
- For 142mm rear hub spacing
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)
- Chainline 49mm (standard), 52mm (Boost)Expected Date:18 December 2025Expected Date:18 December 2025$158.62 (RRP)$158.62 (RRP)$158.62 (RRP)$170.00 (RRP)$158.62 (RRP)$167.89 (RRP)$170.00 (RRP)$170.00 (RRP)$167.89 (RRP)$170.00 (RRP)$154.50 (RRP)$180.00 (RRP)$162.74 (RRP) -
Stock Code:WTTLMLCP-BLK-BLKStock Code:WTTLMLCP-BLK-BLUStock Code:WTTLMLCP-BLK-GLDStock Code:WTTLMLCP-BLK-GRYStock Code:WTTLMLCP-BLK-ORGStock Code:WTTLMLCP-BLK-RED
The patent-pending Pack Pliers is a multi-tool developed to provide functions that are not found on a typical multi-tool and it is light and compact so you can carry it with you. This tool serves as a tire lever, Presta valve core remover, valve stem lock nut wrench and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self closes the tool.
Compatibility
- Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains)
- Master Link storge is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)
- Tire lever not recommended for use on carbon rims
Weight: 38.5g
Size: 116 mm x 20 mm x 9 mm
Material: 7075-T6 aluminum
Master links are not includedExpected Date:18 December 2025Expected Date:18 December 2025$63.86 (RRP)$63.86 (RRP)$63.86 (RRP)$63.86 (RRP)$63.86 (RRP)$63.86 (RRP) -
Stock Code:WTTLCWP
We travel a lot with our bikes and are always looking for the leanest way to have everything we need to build or service a bike without packing 50 lbs of tools! To help with this we developed some very specific Pack Tools that are high quality but weight conscious for those that do mobile wrenching, traveling with their bike, or just want one set of tools that can be thrown in when heading to the trail. This lightweight chain whip is strong enough to be your go to chain whip, but light enough that you won't need to leave it at home when on the move.
Compatibility: Any cassette up to and including 12-speed cassettes
Weight: 170g
Material: 7075-T6 aluminum
Dimensions: Handle length is 11 inches (28cm)
Made in the USA$87.55 (RRP)Add To Cart
-
Stock Code:WTTLHAT-QR-ADPTStock Code:WTTLHAT-QR-KITStock Code:WTTLHAT-TA-KITStock Code:WTTLHAT-TAQR-KIT
Quick Release Adapter - add on part to allow the Thru Axle Kit to be used on quick release bikes
$48.41 (RRP)$136.99 (RRP)$234.84 (RRP)$284.28 (RRP) -
Stock Code:WTTLFWI-CISStock Code:WTTLFWI-H16Stock Code:WTTLFWI-H8Stock Code:WTTLFWI-KIT-01Stock Code:WTTLFWI-LRStock Code:WTTLFWI-S20Stock Code:WTTLPACKWRENCH
Ultralight Cinch and ISIS Spline Wrench Insert - older ISIS bottom brackets or the Race Face Cinch direct mount chainring system.
Steel hex wrench inserts were designed to pair with the Pack Wrench - Ultralight 1 Inch Hex and Bottom Bracket Wrench.
- The aluminum wrench (sold separately) has magnets that hold the inserts in place
- Made in the USA and CNC machined from hardened steel with electroless nickel plating
- Inserts each sold separately
We travel a lot with our bikes and are always looking for the leanest way to have everything we need to build or service a bike without packing 50 lbs of tools. To help with this we developed some very specific Pack Tools that are high quality but weight conscious for those that do mobile wrenching, travel with their bike, or just want one set of tools that can be thrown in when heading to the trail. While the Pack Wrench is lightweight, we wouldn't necessarily call the inserts lightweight. We made the inserts out of steel for extra strength and durability.Expected Date:18 December 2025$39.14 (RRP)$48.41 (RRP)$48.41 (RRP)$225.57 (RRP)$39.14 (RRP)$39.14 (RRP)$100.00 (RRP) -
Stock Code:WTHSEC34L-30-BLK-BStock Code:WTHSEC34L-30-BLU-BStock Code:WTHSEC34L-30-GLD-BStock Code:WTHSEC34L-30-ORG-BStock Code:WTHSEC34L-30-RED-BStock Code:WTHSEC34L-30-PRU-LStock Code:WTHSEC44L-40-BLK-BStock Code:WTHSEC44L-40-BLU-BStock Code:WTHSEC44L-40-GLD-BStock Code:WTHSEC44L-40-RED-BStock Code:WTHSEC44L-40-PRU-BStock Code:WTHSEC49L-40-BLK-BStock Code:WTHSEC49L-40-GLD-BStock Code:WTHSIS52L-40-BStock Code:WTHSZS56L-40-BLK-BStock Code:WTHSZS56L-40-BLU-BStock Code:WTHSZS56L-40-ORG-BStock Code:WTHSZS56L-40-RED-BStock Code:WTHSZS56L-40-PRU-B
EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets.
Performance Headsets with Enduro black oxide bearings have a one-year warranty.
Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our headsets have three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable.
A crown race adapter (sold separately)will allow you to use forks with smaller 1-1/8" or 1-1/4" steerer tubes with a larger 1-1/2" bottom headset cupExpected Date:18 December 2025Expected Date:18 December 2025$80.00 (RRP)$80.00 (RRP)$80.00 (RRP)$80.00 (RRP)$80.00 (RRP)$80.00 (RRP)$80.00 (RRP)$80.00 (RRP)$80.00 (RRP)$80.00 (RRP)$80.00 (RRP)$80.00 (RRP)$80.00 (RRP)$70.00 (RRP)$80.00 (RRP)$80.00 (RRP)$80.00 (RRP)$80.00 (RRP)$80.00 (RRP) -
Stock Code:WTHSEC34U-5MM-BLK-BStock Code:WTHSEC34U-5MM-BLU-BStock Code:WTHSEC34U-5MM-GLD-BStock Code:WTHSEC34U-5MM-ORG-BStock Code:WTHSEC34U-5MM-RED-BStock Code:WTHSEC34U-5MM-PRU-BStock Code:WTHSIS41U-5MM-BLK-BStock Code:WTHSIS41U-5MM-BLU-BStock Code:WTHSIS41U-5MM-GLD-BStock Code:WTHSIS41U-5MM-ORG-BStock Code:WTHSIS41U-5MM-RED-BStock Code:WTHSIS41U-5MM-PRU-BStock Code:WTHSZS44U-5MM-BLK-BStock Code:WTHSZS44U-5MM-BLU-BStock Code:WTHSZS44U-5MM-GLD-BStock Code:WTHSZS44U-5MM-ORG-BStock Code:WTHSZS44U-5MM-RED-BStock Code:WTHSZS44U-5MM-PRU-B
ZS headsets are for frames with internal bearing cups that are pressed into the frame.
Performance Headsets with Enduro black oxide bearings have a one-year warranty.
Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our headsets have three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable.
Compatibility
- Any frame that uses ZS (Zero Stack) headsets with 44mm upper
- Uppers and lowers sold separately.Expected Date:18 December 2025Expected Date:18 December 2025$100.00 (RRP)$100.00 (RRP)$100.00 (RRP)$100.00 (RRP)$100.00 (RRP)$100.00 (RRP)$90.00 (RRP)$90.00 (RRP)$90.00 (RRP)$90.00 (RRP)$90.00 (RRP)$90.00 (RRP)$100.00 (RRP)$100.00 (RRP)$100.00 (RRP)$100.00 (RRP)$100.00 (RRP)$100.00 (RRP) -
Stock Code:WTBR-PST-FLT-BRKADPT
The Wolf Tooth Post to Flat Mount Brake Adapter allows flat mount brakes to be added to a frame or fork that was designed for post mount brakes. This is a vital component for cyclists who want to run a road groupset on a mountain bike frame.
* It is important to note that this is a +20mm adapter, which means a 140mm post mount native size will only work with a 160mm rotor, just as a 160mm post mount native size will only work with a 180mm rotor, and so on.
** These are sold individually.**
Compatibility:
- Fits on post mount native sizes 140, 160, and 180mm
- Works with rotor sizes 160, 180, and 200mm
- Tested with SRAM and Shimano brakes
- Requires minimum 13mm between top of brake boss to frame/fork
- Includes (2x) M5x13mm flat head bolts for flat mount caliper and (2x) M6x15mm socket head bolts for post mount
- CNC machined with 6061-T6 aluminum.$80.00 (RRP) -
Stock Code:WTWA-CP-ADAPT-M01
The Clik Pump Head Adapter (Aluminum) allows you to easily convert legacy pump heads to be quick-connect compatible with the Schwalbe Clik Valve. Featuring a standard Schrader 8v1 thread on one end, the adapter can also be used with hand/mini-pumps, electric pumps, and most CO2 inflators.
Compatibility
Designed to retro-fit a Schrader pump head for use with Clik Valve$32.00 (RRP)Add To Cart
-
Stock Code:WTHSEC34U-5MM-BLKStock Code:WTHSEC34U-5MM-BLUStock Code:WTHSEC34U-5MM-GLDStock Code:WTHSEC34U-5MM-GRNStock Code:WTHSEC34U-5MM-ORGStock Code:WTHSEC34U-5MM-REDStock Code:WTHSEC34U-5MM-RSILStock Code:WTHSEC34U-5MM-PRUStock Code:WTHSIS41U-5MM-BLKStock Code:WTHSIS41U-5MM-BLUStock Code:WTHSIS41U-5MM-GLDStock Code:WTHSIS41U-5MM-GRNStock Code:WTHSIS41U-5MM-ORGStock Code:WTHSIS41U-5MM-REDStock Code:WTHSIS41U-5MM-SILStock Code:WTHSIS41U-5MM-RSILStock Code:WTHSIS41U-5MM-PRUStock Code:WTHSIS41U-8MM-KNOCK-BLKStock Code:WTHSZS44U-5MM-BLKStock Code:WTHSZS44U-5MM-BLUStock Code:WTHSZS44U-5MM-GLDStock Code:WTHSZS44U-5MM-ORGStock Code:WTHSZS44U-5MM-REDStock Code:WTHSZS44U-5MM-RSILStock Code:WTHSZS44U-5MM-PRU
EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets.
Premium Headsets with Enduro stainless steel bearings have a lifetime warranty.
Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our headsets have three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable.
Compatibility
- Stack height designation for EC headsets includes 10mm cup
- Any frame that uses an external cup headset with a 34mm upper head tube inner diameter and 34mm
- Uppers and lowers sold separately.Expected Date:18 December 2025Expected Date:18 December 2025$140.00 (RRP)$140.00 (RRP)$140.00 (RRP)$140.00 (RRP)$140.00 (RRP)$140.00 (RRP)$140.00 (RRP)$140.00 (RRP)$130.00 (RRP)$130.00 (RRP)$130.00 (RRP)$130.00 (RRP)$130.00 (RRP)$130.00 (RRP)$130.00 (RRP)$130.00 (RRP)$130.00 (RRP)$140.00 (RRP)$140.00 (RRP)$140.00 (RRP)$140.00 (RRP)$140.00 (RRP)$140.00 (RRP)$140.00 (RRP)$140.00 (RRP) -
Stock Code:WTHSEC34L-30-BLKStock Code:WTHSEC34L-30-BLUStock Code:WTHSEC34L-30-GLDStock Code:WTHSEC34L-30-GRNStock Code:WTHSEC34L-30-ORGStock Code:WTHSEC34L-30-REDStock Code:WTHSEC34L-30-SILStock Code:WTHSEC34L-30-RSILStock Code:WTHSEC34L-30-PRUStock Code:WTHSEC44L-40-BLKStock Code:WTHSEC44L-40-BLUStock Code:WTHSEC44L-40-GLDStock Code:WTHSEC44L-40-ORGStock Code:WTHSEC44L-40-REDStock Code:WTHSEC44L-40-SILStock Code:WTHSEC44L-40-RSILStock Code:WTHSEC44L-40-PRUStock Code:WTHSEC49L-40-BLKStock Code:WTHSEC49L-40-BLUStock Code:WTHSEC49L-40-GLDStock Code:WTHSEC49L-40-ORGStock Code:WTHSEC49L-40-REDStock Code:WTHSEC49L-40-BLK-P10Stock Code:WTHSIS52L-40Stock Code:WTHSZS56L-40-BLKStock Code:WTHSZS56L-40-BLUStock Code:WTHSZS56L-40-GLDStock Code:WTHSZS56L-40-GRNStock Code:WTHSZS56L-40-ORGStock Code:WTHSZS56L-40-REDStock Code:WTHSZS56L-40-RSILStock Code:WTHSZS56L-40-PRU
EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets.
Premium Headsets with Enduro stainless steel bearings have a lifetime warranty.
Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our headsets have three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable.
A crown race adapter (sold separately)will allow you to use forks with smaller 1-1/8" or 1-1/4" steerer tubes with a larger 1-1/2" bottom headset cupExpected Date:18 December 2025Expected Date:18 December 2025Expected Date:18 December 2025Expected Date:18 December 2025$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$90.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP) -
Stock Code:WTHSEC34U-EC34L-OLVStock Code:WTHSZS44U-EC44L-ESPStock Code:WTHSZS44U-EC44L-OLVStock Code:WTHSZS44U-ZS56L-ESPStock Code:WTHSZS44U-ZS56L-OLV
Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061 aluminum. They are designed to be lightweight, strong, and durable. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. Premium Headsets with Enduro stainless steel bearings have a lifetime warranty.
- Fits any frame that uses ZS (Zero Stack) 44mm upper and EC (External Cup) 44mm lower head tube inner diameter.
- Uppers and lowers sold together as a set.
- Enduro stainless steel sealed bearings have a lifetime warranty$261.00 (RRP)$261.00 (RRP)$261.00 (RRP)$261.00 (RRP)$261.00 (RRP)
