WOLF TOOTH
-
Stock Code:WTBB-T47I-30-ORG
Wolf Tooth T47 Internal Bottom Brackets are engineered to be smooth, durable, lightweight, fast, and user-serviceable. The ground-up design features custom bearings, seals, bushings, and cups, which eliminate creaking and balance best-in-class weather sealing with optimized bearing radial compression, alignment, and preload for low drag.
The bearings in Wolf Tooth Bottom Brackets feature a custom design. The balls and race are made from a hardened chrome bearing steel. This has a higher surface hardness than stainless, which improves the durability of bearing races and reduces spinning resistance and noise. An ACOSUR ZNA coating has also been applied to the race to provide corrosion resistance that is equal to or better than stainless steel after a 500-hour saltwater test. Bearing material paired with an extensive sealing system and the elimination of metal-on-metal contact means Wolf Tooth Bottom Brackets have superior performance in all conditions.
- Compatible with 30mm spindle cranksets
- Adjustable-width sleeve fits 85.5mm - 92mm T47 Internal bottom bracket shells
- Best-in-class weather sealing protects bearings from water, mud, and debris
- Custom polymer spindle bushings eliminate creaking
- Installation and removal with standard 52-16 spline tool or BBS5216
- Replacement parts available
- Engineered, machined, and assembled at Wolf Tooth HQ in Minnesota, USA
- Lifetime warranty on the bearings
Bottom brackets ship with the following shell and spindle spacers:
- 2x 2.5mm shell spacers
- 2x 0.5mm, 2x 1mm, 2mm, 3mm, 5mm 30mm spindle spacers$270.00 (RRP)Add To Cart
-
Stock Code:WTBB-T47I-30-RSIL
Wolf Tooth T47 Internal Bottom Brackets are engineered to be smooth, durable, lightweight, fast, and user-serviceable. The ground-up design features custom bearings, seals, bushings, and cups, which eliminate creaking and balance best-in-class weather sealing with optimized bearing radial compression, alignment, and preload for low drag.
The bearings in Wolf Tooth Bottom Brackets feature a custom design. The balls and race are made from a hardened chrome bearing steel. This has a higher surface hardness than stainless, which improves the durability of bearing races and reduces spinning resistance and noise. An ACOSUR ZNA coating has also been applied to the race to provide corrosion resistance that is equal to or better than stainless steel after a 500-hour saltwater test. Bearing material paired with an extensive sealing system and the elimination of metal-on-metal contact means Wolf Tooth Bottom Brackets have superior performance in all conditions.
- Compatible with 30mm spindle cranksets
- Adjustable-width sleeve fits 85.5mm - 92mm T47 Internal bottom bracket shells
- Best-in-class weather sealing protects bearings from water, mud, and debris
- Custom polymer spindle bushings eliminate creaking
- Installation and removal with standard 52-16 spline tool or BBS5216
- Replacement parts available
- Engineered, machined, and assembled at Wolf Tooth HQ in Minnesota, USA
- Lifetime warranty on the bearings
Bottom brackets ship with the following shell and spindle spacers:
- 2x 2.5mm shell spacers
- 2x 0.5mm, 2x 1mm, 2mm, 3mm, 5mm 30mm spindle spacers$270.00 (RRP)Add To Cart
-
Stock Code:WTBB-T47I-30-PRU
Wolf Tooth T47 Internal Bottom Brackets are engineered to be smooth, durable, lightweight, fast, and user-serviceable. The ground-up design features custom bearings, seals, bushings, and cups, which eliminate creaking and balance best-in-class weather sealing with optimized bearing radial compression, alignment, and preload for low drag.
The bearings in Wolf Tooth Bottom Brackets feature a custom design. The balls and race are made from a hardened chrome bearing steel. This has a higher surface hardness than stainless, which improves the durability of bearing races and reduces spinning resistance and noise. An ACOSUR ZNA coating has also been applied to the race to provide corrosion resistance that is equal to or better than stainless steel after a 500-hour saltwater test. Bearing material paired with an extensive sealing system and the elimination of metal-on-metal contact means Wolf Tooth Bottom Brackets have superior performance in all conditions.
- Compatible with 30mm spindle cranksets
- Adjustable-width sleeve fits 85.5mm - 92mm T47 Internal bottom bracket shells
- Best-in-class weather sealing protects bearings from water, mud, and debris
- Custom polymer spindle bushings eliminate creaking
- Installation and removal with standard 52-16 spline tool or BBS5216
- Replacement parts available
- Engineered, machined, and assembled at Wolf Tooth HQ in Minnesota, USA
- Lifetime warranty on the bearings
Bottom brackets ship with the following shell and spindle spacers:
- 2x 2.5mm shell spacers
- 2x 0.5mm, 2x 1mm, 2mm, 3mm, 5mm 30mm spindle spacers$270.00 (RRP)Add To Cart
-
Stock Code:WTDRTANPAN-SH10-Inline
The Negotiator.
The Tanpan makes Shimano 10- and 11-speed road shifters work with 10- and 11-speed mountain bike rear derailleurs.
Crossing boundaries and breaking down walls: the Tanpan brings the range and security of Shimano mountain rear derailleurs to Shimano-equipped drop-bar bicycles. This means greater gearing range for bigger adventures, better chain security for rough terrain, and lighter weight and reduced complexity for the daily commute.
In order to deliver these benefits, the Tanpan amplifies road shifter cable pull to allow for seamless communication with mountain derailleurs. The result is ideal for riders looking to convert their road, gravel, cyclocross, or commuter bike to the simplicity and light weight of a single chainring – or for those whose riding demands lower gearing than a typical double can provide. With the addition of a clutch-equipped Shadow+ rear derailleur, the Tanpan provides unparalleled chain security for Shimano road drivetrains.
The 17g Tanpan installs in moments, tucking neatly above the rear derailleur and an indexed barrel provides for quick and easy cable adjustment. Each Tanpan is CNC machined in the USA by Wolf Tooth and comes fitted with precision stainless steel hardware and a sealed cartridge bearing.
Compatibility
- Compatible with most road, gravel and CX bikes.
- Tiagra 4700 is compatible with Tanpan but for proper shifting use Tanpan 11spd and an 11spd rear derailleur with a 10spd cassette.
- ONLY Compatible with Tiagra 4700 when using Tanpan11 and corresponding 11-speed derailleur.
Recommendations
- 1.1mm diameter shift cable recommended and a new cable is always a good idea.
- The Tanpan 10 is compatible with 10-speed Shimano road shifters and optimized for ten-speed Shimano mountain derailleurs.
- 11-speed Shimano mountain derailleurs may be used with only a slight decrease in shifting performance
- The Tanpan 11 is compatible with 11-speed Shimano road shifters and optimized for eleven-speed Shimano mountain derailleurs (includes new Dura Ace 9100)
- Ten-speed Shimano mountain derailleurs may be used with only a slight decrease in shifting performance
- The Tanpan 11 is designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs. Tanpan 10 must be mounted inline for optimal performance.$94.43 (RRP)Add To Cart
-
Stock Code:WTDRTANPAN-SH11-Inline
The Negotiator.
The Tanpan makes Shimano 10- and 11-speed road shifters work with 10- and 11-speed mountain bike rear derailleurs.
Crossing boundaries and breaking down walls: the Tanpan brings the range and security of Shimano mountain rear derailleurs to Shimano-equipped drop-bar bicycles. This means greater gearing range for bigger adventures, better chain security for rough terrain, and lighter weight and reduced complexity for the daily commute.
In order to deliver these benefits, the Tanpan amplifies road shifter cable pull to allow for seamless communication with mountain derailleurs. The result is ideal for riders looking to convert their road, gravel, cyclocross, or commuter bike to the simplicity and light weight of a single chainring – or for those whose riding demands lower gearing than a typical double can provide. With the addition of a clutch-equipped Shadow+ rear derailleur, the Tanpan provides unparalleled chain security for Shimano road drivetrains.
The 17g Tanpan installs in moments, tucking neatly above the rear derailleur and an indexed barrel provides for quick and easy cable adjustment. Each Tanpan is CNC machined in the USA by Wolf Tooth and comes fitted with precision stainless steel hardware and a sealed cartridge bearing.
** Important Note: If the rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle out the very end, you will need to use the inline version. This is because the Tanpan barrel adjuster end sits too close to the frame for the internally routed cable to exit the frame and enter the Tanpan barrel adjuster. The Inline Tanpan includes ferrule and takes place of barrel adjuster in 4mm cable housing.
Compatibility
- Compatible with most road, gravel and CX bikes.
- Tiagra 4700 is compatible with Tanpan but for proper shifting use Tanpan 11spd and an 11spd rear derailleur with a 10spd cassette.
- ONLY Compatible with Tiagra 4700 when using Tanpan11 and corresponding 11-speed derailleur.
Recommendations
- 1.1mm diameter shift cable recommended and a new cable is always a good idea.
- The Tanpan 10 is compatible with 10-speed Shimano road shifters and optimized for ten-speed Shimano mountain derailleurs.
- 11-speed Shimano mountain derailleurs may be used with only a slight decrease in shifting performance
- The Tanpan 11 is compatible with 11-speed Shimano road shifters and optimized for eleven-speed Shimano mountain derailleurs (includes new Dura Ace 9100)
- Ten-speed Shimano mountain derailleurs may be used with only a slight decrease in shifting performance
- The Tanpan 11 is designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs. Tanpan 10 must be mounted inline for optimal performance.$94.43 (RRP) -
Stock Code:WTDP-RES-SHSC-BRL-TIG$30.85 (RRP)
Add To Cart
-
Stock Code:WTDP-RES-SHSC-BRL-TIR$30.85 (RRP)
Add To Cart
-
Stock Code:WTBC4TIWBBOLT-LPStock Code:WTBC4TIWBBOLTRNBW-LPStock Code:WTBC4TIWBBOLTStock Code:WTBC4TIWBBOLTRNBW
Standard Head - Raw finish
These M5x15mm titanium water bottle cage bolts are available in an oil slick finish or raw silver. Titanium bolts are stronger than aluminum bolts and are a solid upgrade for cyclists who carry cargo by bolting it to their frame. They are sold in packs of four.$34.00 (RRP)$34.00 (RRP)$34.00 (RRP)$34.00 (RRP) -
Stock Code:WTTLTTWrap
When the Wolf Tooth team sat down to design this tool wrap, we made a long list of "must haves"...maybe too long. The end result was the most full-featured bicycle tool wrap available designed to make trailside repairs quick and efficient so you can get out riding. Maybe we are overly excited about optimizing our mobile wrenching experience, but these features might get you going too:
- Top flap that can be shut in a car door for a mobile workshop
- Bottom flap provides a workspace to keep your parts and tools out of the dirt when working on the ground
- Pocket layout is ideal for all the tools you need to build a bike
- Aluminum eyelets for hanging up in your home or workshop$97.85 (RRP) -
Stock Code:WTWA-TLV-KIT44-BLKStock Code:WTWA-TLV-KIT44-BLUStock Code:WTWA-TLV-KIT44-GLDStock Code:WTWA-TLV-KIT44-ORGStock Code:WTWA-TLV-KIT44-PNKStock Code:WTWA-TLV-KIT44-PRUStock Code:WTWA-TLV-KIT44-RBWStock Code:WTWA-TLV-KIT44-REDStock Code:WTWA-TLV-KIT44-RSIL
These Presta valve stems are compatible with tubeless rims and tires for road, gravel, mountain, and fat bike wheels.
The kit includes two Presta valve stems, two machined aluminum caps, two nuts, two extra valve cores, a unique machined aluminum valve core remover, and three rubber base options for compatibility with more rim internal shapes.
?- 44mm and 60mm stem length options
- Slotted stem base for compatibility with tire inserts
- Oversized stem nut for better sealing and easier removal
- Stem threaded below rubber seal for better performance on single wall rims
- Three rubber bases included: two types of cones (one installed), one channel
- Replacement parts available via Wolf Tooth Right To Repair, including cap kit with two caps, nut kit with two nuts, and valve cores$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP) -
Stock Code:WTWA-TLV-KIT60-BLKStock Code:WTWA-TLV-KIT60-BLUStock Code:WTWA-TLV-KIT60-GLDStock Code:WTWA-TLV-KIT60-ORGStock Code:WTWA-TLV-KIT60-PNKStock Code:WTWA-TLV-KIT60-PRUStock Code:WTWA-TLV-KIT60-RBWStock Code:WTWA-TLV-KIT60-RSILStock Code:WTWA-TLV-KIT60-RED
These Presta valve stems are compatible with tubeless rims and tires for road, gravel, mountain, and fat bike wheels.
The kit includes two Presta valve stems, two machined aluminum caps, two nuts, two extra valve cores, a unique machined aluminum valve core remover, and three rubber base options for compatibility with more rim internal shapes.
?- 44mm and 60mm stem length options
- Slotted stem base for compatibility with tire inserts
- Oversized stem nut for better sealing and easier removal
- Stem threaded below rubber seal for better performance on single wall rims
- Three rubber bases included: two types of cones (one installed), one channel
- Replacement parts available via Wolf Tooth Right To Repair, including cap kit with two caps, nut kit with two nuts, and valve cores$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP)$64.89 (RRP) -
Stock Code:WTSCSTEMCAPBLK1Stock Code:WTSCSTEMCAPBLU1Stock Code:WTSCSTEMCAPGLD1Stock Code:WTSCSTEMCAPORG1Stock Code:WTSCSTEMCAPRED1Stock Code:WTSCSTEMCAPRSIL1Stock Code:WTSCSTEMCAPPRU1
Details matter when you are building up a bike and the stem cap should not be overlooked. This ultralight and ultra-sleek stem cap fits flush with your stem or can be used with a spacer under it. It is precision machined out of 7075-T6 aluminum for the lowest weight without any performance compromise.
Compatibility- 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only$30.00 (RRP)$30.00 (RRP)$30.00 (RRP)$30.00 (RRP)$30.00 (RRP)$30.00 (RRP)$30.00 (RRP) -
Stock Code:WTSPVALAIS25-25Stock Code:WTSPVALAIS25-26
Like many riders, the Wolf Tooth Components team has recently rediscovered the joys of unencumbered riding, lowering our center of gravity and increasing our freedom of movement by moving gear from our backs to our bikes. While the classic seat pack is a great place to store little-used essentials out of the elements, their mounting systems can interfere with and often damage modern dropper seatposts.
In order to allow saddle bag mounting on dropper posts, the Wolf Tooth Valais 25 mounts to the seatpost upper, providing a secure mounting point while protecting the stanchion from wear and the wiper seal from damage. Injection molded from an engineering-grade thermoplastic, the Valais 25 can also serve as a temporary crutch in the event of a backcountry dropper failure. The dual-lip design securely holds packs with straps up to 25mm wide and at full compression the deep skirt contacts the seal collar first, protecting delicate seals from damage.
Strong, resilient, and non-marring DuPont Delrin thermoplastic, allowing for easy snap-on installation and full strength all the way down to -20°F/-29°C.
Shifts cargo to the bike: Small- and mid-sized saddle packs are ideal places to securely store tubes, mini tools, and CO2 cartridges, ensuring that they’re always on hand when needed while freeing up the top tube and handlebar bags for more regularly-accessed items.
Protects seatpost: Inexpensive insurance, the Valais 25 protects dropper post stanchions from the wear that occurs at the intersection of saddle bag, seatpost, and wheel-flung grit.
Emergency Crutch: While dropper posts continue to improve, locking mechanism failure still occurs- often far from the trailhead. The Valais 25 can be used to keep posts extended, allowing the rider to comfortably pedal out of the backcountry.
Raceday Travel Limiter: When seven inches is more than terrain calls for, the Valais 25 can be used to limit dropper travel to suit.
Compatibility: Any dropper post with a 25mm or 26mm stanchion diameter - when in doubt, measure your stanchion.$50.96 (RRP)$50.96 (RRP) -
Stock Code:WTBC4WBBOLTBLKStock Code:WTBC4WBBOLTBLUStock Code:WTBC4WBBOLTGLDStock Code:WTBC4WBBOLTORGStock Code:WTBC4WBBOLTPNKStock Code:WTBC4WBBOLTPRPStock Code:WTBC4WBBOLTREDStock Code:WTBC4WBBOLTSILStock Code:WTBC4WBBOLTTEALStock Code:WTBC4WBBOLTESPStock Code:WTBC4WBBOLTOLV
Details matter when you are building up your ride. These M5x15mm water bottle cage bolts are the perfect finishing touch to a bike built with our colored headset spacers, chainrings, chainring bolts, and stem caps. Sold in packages of four.
$16.00 (RRP)$16.00 (RRP)$16.00 (RRP)$16.00 (RRP)$16.00 (RRP)$16.00 (RRP)$16.00 (RRP)$16.00 (RRP)$16.00 (RRP)$16.00 (RRP)$16.00 (RRP) -
Stock Code:WTPDL-WF-LG-BLKStock Code:WTPDL-WF-LG-BLUStock Code:WTPDL-WF-LG-ORGStock Code:WTPDL-WF-LG-PRPStock Code:WTPDL-WF-LG-OLVStock Code:WTPDL-WF-LG-ESPStock Code:WTPDL-WF-LG-SILStock Code:WTPDL-WF-LG-GLDStock Code:WTPDL-WF-SM-BLKStock Code:WTPDL-WF-SM-BLUStock Code:WTPDL-WF-SM-ORGStock Code:WTPDL-WF-SM-PRPStock Code:WTPDL-WF-SM-OLV
Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform, shaped to match the footprint of your shoe. They have a slim, dual-concave profile that is 14mm thick at the perimeter and just 12.5mm thick in the center, cradling your foot for optimal pedal feel. Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. The design also features a large, tapered leading edge to deflect pedal strikes on rough terrain. A custom radial seal protects three fully sealed cartridge bearings for low-friction riding in all conditions.
- Two sizes: Large is 112mm x 106mm, small is 105mm x 99mm
- Three high-precision, low-friction sealed bearings designed specifically for this pedal, with one igus bushing
- Custom radial seal to protect internal hardware from water, dirt, and trail debris
- Eleven stainless steel, rear-loading 4.5mm pins per side
- Dual Concavity secures your feet firmly in place on the pedals, both front-to-back and side-to-side
- Tapered leading edge deflects pedal strikes.
Weight: Large set 384g | Small set 373g$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP)$345.05 (RRP) -
Stock Code:WTCLSGSOCK1LStock Code:WTCLSGSOCK1S
These are everyone’s favorite socks at the shop...both for riding and hanging out. The wool blend material is durable and comfortable and the wolf head logo lets everyone behind you know you are a serious rider.
5" cuff
Size S/M: Fits US Mens 5-9, US Womens 6-10
Size L/XL: Fits US Mens 9-13, US Womens 10-14
Made in the USA
Made from TurboWool — a superior blend of 50% Merino wool and 50% polypropylene. This blend is 5 times the strength and durability of Merino wool alone. Shrink-resistant and itch-free our wool socks will keep your feet drier and provide excellent insulation in all weather conditions. Our Wool socks also feature our "Easy-Fit" cuff and "Stretch-to-Fit" sizing system for maximum fit and performance. Our TurboWool socks out-wick and evaporate moisture better than any other wool sock on the market today.$30.00 (RRP)$30.00 (RRP) -
Stock Code:WTCLWOOLIGAN_SGSOCK1LStock Code:WTCLWOOLIGAN_SGSOCK1S
These new Wooligan socks quickly became our favorites for cold rides in the spring and fall. They are awesome both on and off the bike. These socks have thicker wool on the foot bottom and toes which makes them super comfortable. They feature a new triangle design and still have the WTC wolf on the back which never fails to get you noticed in a crowd.
8" cuff
Size S/M: Fits US Mens 5-9, US Womens 6-10
Size L/XL: Fits US Mens 9-13, US Womens 10-14
Made in the USA
The Wooligan is the best cool weather sock you will ever wear. These socks will keep your feet dry and warm in all weather conditions. Featuring an 8" cuff, arch support, moisture wicking channels and a padded foot bottom for extra warmth and comfort. Made with 75% TurboWool, a superior blend of 50% polypropylene and 50% Merino wool, which provides five times the strength and durability of Merino wool alone. Shrink-resistant and itch-free.$32.00 (RRP)$32.00 (RRP) -
Stock Code:WTLU-LUBE-WT1-0_5OZ
WT-1 Chain Lube is a premium synthetic chain lubricant and a drivetrain treatment for all conditions in the same bottle. It cleans and protects chains while improving overall mechanical efficiency of a drivetrain. This allows cyclists to have just WT-1 Chain Lube on hand, instead of separate dry chain lube, wet chain lube, chain cleaner, and drivetrain treatment. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes because it binds so well with chains. As a drivetrain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away, then it will protect your chain in all riding conditions and allow you to ride longer between applications.
- Cleans, lubricates, and protects chains
- Peak performance in all conditions
- Optimal choice for complex modern drivetrains
- Easy to use. Quick to apply.
- Also works on other places of your bike, including hubs, cables, and pulley wheels
APPLICATION PROCESS
Ease of use is important in selecting a chain lubricant and chain treatment. The complete application process of WT-1 Chain Lube takes less than a minute and there is no need to clean your chain before getting started.
Here’s how to begin using WT-1 Chain Lube:
1. Shake bottle of WT-1 for 30 seconds. A ball bearing is present in every bottle to help mix things up.
2. Apply one drop to each roller of your chain. We recommend applying WT-1 Chain Lube to the top side of your chain between your derailleur and chainring, just in front of that lower pulley wheel.
3. Backpedal 20-30 times. This helps WT-1 Chain Lube find its way between all the pieces of your chain.
4. Wipe chain with microfiber cloth until it appears clean with a light sheen. It'll look extra dirty at first, then it will clear up as you wipe away that dirt.
5. Ride your bike. Reapply at least once every 650km
After your first couple applications, you’ll notice that your chain looks extra dirty following your first few rides. This means that WT-1 Chain Lube is working because that detergent-like additive has made its way into the gaps and crevices of your chain and is actively pushing out dirt, grease, and debris. You’ll want to wipe down your chain after those first few rides to remove chain contaminants. As you ride more and more, you’ll see WT-1 get into its stride and your chain will be clean, silent, and efficient.$13.39 (RRP)Add To Cart
-
Stock Code:WTLU-LUBE-WT1-2OZ
WT-1 Chain Lube is a premium synthetic chain lubricant and a drivetrain treatment for all conditions in the same bottle. It cleans and protects chains while improving overall mechanical efficiency of a drivetrain. This allows cyclists to have just WT-1 Chain Lube on hand, instead of separate dry chain lube, wet chain lube, chain cleaner, and drivetrain treatment. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes because it binds so well with chains. As a drivetrain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away, then it will protect your chain in all riding conditions and allow you to ride longer between applications.
- Cleans, lubricates, and protects chains
- Peak performance in all conditions
- Optimal choice for complex modern drivetrains
- Easy to use. Quick to apply.
- Also works on other places of your bike, including hubs, cables, and pulley wheels
APPLICATION PROCESS
Ease of use is important in selecting a chain lubricant and chain treatment. The complete application process of WT-1 Chain Lube takes less than a minute and there is no need to clean your chain before getting started.
Here’s how to begin using WT-1 Chain Lube:
1. Shake bottle of WT-1 for 30 seconds. A ball bearing is present in every bottle to help mix things up.
2. Apply one drop to each roller of your chain. We recommend applying WT-1 Chain Lube to the top side of your chain between your derailleur and chainring, just in front of that lower pulley wheel.
3. Backpedal 20-30 times. This helps WT-1 Chain Lube find its way between all the pieces of your chain.
4. Wipe chain with microfiber cloth until it appears clean with a light sheen. It'll look extra dirty at first, then it will clear up as you wipe away that dirt.
5. Ride your bike. Reapply at least once every 650km
After your first couple applications, you’ll notice that your chain looks extra dirty following your first few rides. This means that WT-1 Chain Lube is working because that detergent-like additive has made its way into the gaps and crevices of your chain and is actively pushing out dirt, grease, and debris. You’ll want to wipe down your chain after those first few rides to remove chain contaminants. As you ride more and more, you’ll see WT-1 get into its stride and your chain will be clean, silent, and efficient.$37.08 (RRP)Add To Cart
-
Stock Code:WTLU-LUBE-WT1-2OZ-12PK
WT-1 Chain Lube is a premium synthetic chain lubricant and a drivetrain treatment for all conditions in the same bottle. It cleans and protects chains while improving overall mechanical efficiency of a drivetrain. This allows cyclists to have just WT-1 Chain Lube on hand, instead of separate dry chain lube, wet chain lube, chain cleaner, and drivetrain treatment. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes because it binds so well with chains. As a drivetrain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away, then it will protect your chain in all riding conditions and allow you to ride longer between applications.
- Cleans, lubricates, and protects chains
- Peak performance in all conditions
- Optimal choice for complex modern drivetrains
- Easy to use. Quick to apply.
- Also works on other places of your bike, including hubs, cables, and pulley wheels
APPLICATION PROCESS
Ease of use is important in selecting a chain lubricant and chain treatment. The complete application process of WT-1 Chain Lube takes less than a minute and there is no need to clean your chain before getting started.
Here’s how to begin using WT-1 Chain Lube:
1. Shake bottle of WT-1 for 30 seconds. A ball bearing is present in every bottle to help mix things up.
2. Apply one drop to each roller of your chain. We recommend applying WT-1 Chain Lube to the top side of your chain between your derailleur and chainring, just in front of that lower pulley wheel.
3. Backpedal 20-30 times. This helps WT-1 Chain Lube find its way between all the pieces of your chain.
4. Wipe chain with microfiber cloth until it appears clean with a light sheen. It'll look extra dirty at first, then it will clear up as you wipe away that dirt.
5. Ride your bike. Reapply at least once every 650km
After your first couple applications, you’ll notice that your chain looks extra dirty following your first few rides. This means that WT-1 Chain Lube is working because that detergent-like additive has made its way into the gaps and crevices of your chain and is actively pushing out dirt, grease, and debris. You’ll want to wipe down your chain after those first few rides to remove chain contaminants. As you ride more and more, you’ll see WT-1 get into its stride and your chain will be clean, silent, and efficient.$412.00 (RRP)Add To Cart
-
Stock Code:WTLU-WT-G-2OZ
Wolf Tooth WT-G Precision Bike Grease is a waterproof, synthetic oil-based lubricant for cyclingspecific applications. It reduces friction on moving components while protecting them from
contaminants, water, and corrosion. WT-G also prevents non-moving components from seizing together due to corrosion or galling. This is a grease that can be used on bottom brackets, hubs,headsets, general bicycle assembly, and more. WT-G Precision Bike Grease builds on the product line that was created by WT-1 Chain Lube as products that aid and enhance performance of Wolf Tooth components.
• Maintains low viscosity for consistent performance from -60ºF to 360ºF (roughly -50ºC to -180ºC)
in all conditions
• Creates smooth, easy component movement for low energy loss
• Long-lasting lubrication for extended bearing and component life
• High resistance to oxidation and corrosion
• Can be used on steel, alloy, and titanium$15.45 (RRP) -
Stock Code:WTLU-WT-G-8OZ
Wolf Tooth WT-G Precision Bike Grease is a waterproof, synthetic oil-based lubricant for cyclingspecific applications. It reduces friction on moving components while protecting them from
contaminants, water, and corrosion. WT-G also prevents non-moving components from seizing together due to corrosion or galling. This is a grease that can be used on bottom brackets, hubs,headsets, general bicycle assembly, and more. WT-G Precision Bike Grease builds on the product line that was created by WT-1 Chain Lube as products that aid and enhance performance of Wolf Tooth components.
• Maintains low viscosity for consistent performance from -60ºF to 360ºF (roughly -50ºC to -180ºC)
in all conditions
• Creates smooth, easy component movement for low energy loss
• Long-lasting lubrication for extended bearing and component life
• High resistance to oxidation and corrosion
• Can be used on steel, alloy, and titanium$48.41 (RRP)Add To Cart
-
Stock Code:WTDP-RES2-100-KIT
100 Hour Service Kit Resolve Dropper Rev2 30.9/31.6 includes:
- Grease
- Wiper Seal
- Top Cap O-Ring Set - Set of 5
- Air Filter and Filter Retainer
- XZN-16 Socket
- Split Bushing$46.35 (RRP)
