WOLF TOOTH
-
Stock Code:WTCHOVAL10432-BStock Code:WTCHOVAL10434-BStock Code:WTCHOVAL10436Stock Code:WTCHOVAL10436-B
- These rings fit any 104 BCD crankset
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
Quarq power meter compatible with sizes 34t and 36t. Filing required for 32t fitment onto some older Quarq Power meters. No modifications are required for the DUB Quarq Power meter.
- Chainline (approximate as BB centering and cranksets vary) - 48mm on 3x cranksets and 49mm on 2x
- Threaded to use M8 chainring bolts (no nuts required)
- Ovality of 10% and timing of 112° after TDC (top dead center)
- Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)Expected Date:31 May 2024POA$138.25 (RRP)$138.25 (RRP)$138.25 (RRP) -
Stock Code:WTCHOVAL-11038-FTStock Code:WTCHOVAL-11040-FTStock Code:WTCHOVAL-11042-FT
10, 11, & 12spd Eagle and Flattop - These chainrings are designed to work with all 10 speed, and 11 speed chains. They also work with 12 speed SRAM Flattop, SRAM Eagle and KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain.
More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth’s PowerTrac Elliptical™ (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112°) than competitors’ versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings.
It’s like having two chainrings in one! With PowerTrac Elliptical rings, the larger-diameter section of the ring engages with the chain at the optimal point on the downstroke, or “Power Zone,” – between 1-5 and 7-11 on a clock face – to take advantage of your body’s natural biomechanical POWER: For example, during this section, a PTE 34t ring is equivalent to a 36t round ring. Similarly in the “Recovery Zone” (11-1 and 5-7), the smaller section on the PTE ring engages, maximizing EFFICIENCY in the weakest part of the pedal stroke; here the PTE 34t ring is equivalent to a 32t round ring.
Additionally, the above provides a smoother, more efficient pedal rotation, which means better TRACTION. Steadier torque on the rear wheel means less spinning out in the “Power Zone,” while pedaling is easier during the “Recovery Zone,” so you maintain momentum.
Compatibility
These rings are for use with 110 BCD 5 arm cranksets.
Crank arm clocking arrow will be rotated 180 degrees from normal on cranksets that have 4 bolts visible and 1 hidden bolt behind the crank arm like for SRAM.
Do NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800
Not compatible with Campy CX10/11.
Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability$158.00 (RRP)$158.00 (RRP)$158.00 (RRP) -
Stock Code:WTCHOVAL6430
- These rings fit any crankset that has a 64 BCD "small ring" position. This includes standard 104 BCD cranksets, the M960 Shimano XTR crankset, the 96 BCD Triple cranksets (e.g. M782) and some others.
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
- Chainline (approximate as BB centering and cranksets vary) - 47mm on a triple and 48mm on a double crankset
- Ovality of 10% and timing of 112° after TDC (top dead center)
- Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)Was:$128.40 (RRP)Now:$108.90 (RRP)Price:$108.90 (RRP) -
Stock Code:WTCHOVAL-M8K-32
- These rings fit on the Shimano XT M8000 and SLX M7000 1x or 2x cranksets.
- Use only the stock Shimano XT M8000 or SLX M7000 chainring bolts
- These CAN be mounted to the XTR 9000 series cranks, but you will have to use the bolt caps that come with that crankset and you will need to file roughly 1mm off the threaded boss on each bolt cap (they are a little too long and don't allow the ring to be tightened down).
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Provide a great chainline on most boost bikes.
- Chainline - 49mm
- Boost Crankset Chainline - 52 mm
- Must use the stock chainring bolts. The Wolf Tooth chainring bolts are a different size.
- Ovality of 10% and timing of 112° after TDC (top dead center)
- Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)
More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth’s PowerTrac Elliptical™ (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112°) than competitors’ versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings.
It’s like having two chainrings in one! With PowerTrac Elliptical rings, the larger-diameter section of the ring engages with the chain at the optimal point on the downstroke, or “Power Zone,” – between 1-5 and 7-11 on a clock face – to take advantage of your body’s natural biomechanical POWER: For example, during this section, a PTE 34t ring is equivalent to a 36t round ring. Similarly in the “Recovery Zone” (11-1 and 5-7), the smaller section on the PTE ring engages, maximizing EFFICIENCY in the weakest part of the pedal stroke; here the PTE 34t ring is equivalent to a 32t round ring.
Additionally, the above provides a smoother, more efficient pedal rotation, which means better TRACTION. Steadier torque on the rear wheel means less spinning out in the “Power Zone,” while pedaling is easier during the “Recovery Zone,” so you maintain momentum.Expected Date:31 May 2024$128.40 (RRP) -
Stock Code:WTCHOVAL-32XTRM9000Stock Code:WTCHOVAL-34XTRM9000
These chainrings fit only the Shimano XTR M9000 and M9020 cranksets (race and trail respectively). They have an asymmetrical 96 mm BCD with built-in threaded standoffs to provide the ideal 1X chainline.
- Use only the stock Shimano XTR chainring bolts (M7)
- You will not use the stock bolt caps when mounting this ring. The stock bolts will thread into the chainring's standoffs from the outside of the crankset.
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Provide a great chainline on most boost bikes.
- Chainline - 49mm for 30-34t
More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth’s PowerTrac Elliptical™ (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112°) than competitors’ versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings.
It’s like having two chainrings in one! With PowerTrac Elliptical rings, the larger-diameter section of the ring engages with the chain at the optimal point on the downstroke, or “Power Zone,” – between 1-5 and 7-11 on a clock face – to take advantage of your body’s natural biomechanical POWER: For example, during this section, a PTE 34t ring is equivalent to a 36t round ring. Similarly in the “Recovery Zone” (11-1 and 5-7), the smaller section on the PTE ring engages, maximizing EFFICIENCY in the weakest part of the pedal stroke; here the PTE 34t ring is equivalent to a 32t round ring.
Additionally, the above provides a smoother, more efficient pedal rotation, which means better TRACTION. Steadier torque on the rear wheel means less spinning out in the “Power Zone,” while pedaling is easier during the “Recovery Zone,” so you maintain momentum.$138.25 (RRP)$138.25 (RRP) -
Stock Code:WTTLENCASE-BACON-STRIPS
Plug holes in your bicycle tire with a bacon strip and get back on the road or trail. These bacon strips are just the right size to avoid enlarging the puncture while plugging the hole. Roll them and store in the handle of the EnCase® System Chain + Tire Plug Multi-Tool.
There are 15 bacon strip plugs sold in this set.$19.67 (RRP)Add To Cart
-
Stock Code:WTTLENCASE-CHN-TIREPLUG
Fix tubeless tires and broken chains. This multi-tool has a chain tool on one end and a tire plug built into the handle, with inner storage for tubeless tire plugs. The full multi-tool was designed for use with an EnCase® System Storage Sleeve, which fits inside bar ends of your handlebars. Ride with this multi-tool in a storage sleeve or in a tool wrap for easy repairs while riding.
- Compatible with all bicycle chains, including 12-speed
- Inserter tool and bacon strips plug holes in tubeless tires
- Five bacon strip tire plugs included; refills available (EnCase System Extras)
- Hardened steel chain pin driver for lifetime durability
- Store in handlebar with EnCase System Storage Sleeves (sold separately) or carry in a jersey pocket
- Chain tool driver requires 4mm hex (available on EnCase System Hex Bit Wrench Multi-Tool)$89.00 (RRP)Add To Cart
-
Stock Code:WTTLENCASE-HEX-WRENCH
Make simple repairs while riding with this multi-tool that has 14 functions. An 8mm hex head has a 4mm insert to fit each of the eight attached hex bits. With its slim design, this multi-tool can be stowed inside bicycle handlebars using an EnCase® System Storage Sleeve or used as a mainstay on any home workbench.
- 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx compatible)
- Magnets & O-rings keep all parts in place
- Ball detent swivel head helps access hard-to-reach places
- Handle doubles as breaker bar for extra torque when head is bent
- Store in handlebar with an EnCase System Storage Sleeve (sold separately)
- Magnet on the bottom of tool for convenient storage on steel bike stands (or refrigerators)
Compatibility
- Fits most mountain handlebars and road handlebars when combined with the storage sleeve. Works with both carbon and aluminum handlebars. Does not fit ergonomic-style road bars with extra bends in the drops.
- Minimum internal bar diameter is 17.5mm.Expected Date:31 May 2024$98.72 (RRP) -
Stock Code:WTTLENCASE-HEX-BITS$39.43 (RRP)
Add To Cart
-
Stock Code:WTTLENCASE-SLEEVES
Easily carry everything you need for trailside repair, in a secure out-of-the-way location with the EnCase® System. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a presta-to-schrader adapter and valve core or a master link for support on the trail.
Vibration-damping material and snug fit prevents rattling
Durable precision-machined aluminum end caps
Custom fit rubber flap can be trimmed to fit in smaller diameter bars
Bonus storage space—fits a presta-to-schrader adapter and valve core or a master link (both sold separately EnCase System Extras)
Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars
Compatibility
Fits most mountain handlebars and road handlebars when combined with the storage sleeve. Does not fit ergonomic-style road bars with extra bends in the drops.
Works with both carbon and aluminum handlebars.
Minimum internal bar diameter is 17.5mm.
Two storage sleeves are included in this kit.
Known incompatible handlebars: Syntace Vector, Diety Skywire, Jones H-Bar Loop SG 2.5, Chromag BZAExpected Date:31 May 2024$69.08 (RRP) -
Stock Code:WTTLENCASE-BAR-KIT-ONE
In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase® System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebars inner diameter.
The EnCase System: Bar Kit One includes a Hex Bit Wrench Multi-tool, a Chain + Tire Plug Multi-tool, and two Storage Sleeves.
HEX BIT WRENCH MULTI-TOOL
14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx compatible)
Magnets & O-rings keep all parts in place
Ball detent swivel head helps access hard-to-reach places
Handle doubles as breaker bar for extra torque when tool head is bent
Store in handlebar with EnCase Storage Sleeve
Magnet on the bottom of tool for convenient storage on steel bike stands (or refrigerators)
CHAIN + TIRE PLUG MULTI-TOOL
Compatible with all bicycle chains including 12-speed
Inserter tool and bacon strips plug holes in tubeless tires
Five strips included; refills available (EnCase System Extras)
Hardened steel pin for lifetime durability
Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench
STORAGE SLEEVES
Vibration-damping material and snug fit prevents rattling
Durable precision-machined aluminum end caps
Custom fit rubber flap can be trimmed to fit in smaller diameter bars
Bonus storage space—fits a presta-to-schrader adapter and valve core or a master link (both sold separately EnCase System Extras)
Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars
Compatibility
Fits most mountain handlebars and road handlebars. Does not fit ergonomic-style road bars with extra bends in the drops.
Works with both carbon and aluminum handlebars.
Minimum internal bar diameter is 17.5mm.
Known incompatible handlebars: Syntace Vector, Diety Skywire, Jones H-Bar Loop SG 2.5, Chromag BZA, BMC RCB01, S-Works Hover Carbon$237.08 (RRP)Add To Cart
-
Stock Code:WTBTCam-FatPaw-BLK
Ergonomic grips with this unique cam profile lets you choose the position that best supports your hand position and style of riding. The 9.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands.
- 36mm installed diameter make these the thickest silicone foam grips available on the market
- 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability
- Tacky texture provides excellent grip with or without gloves in all weather conditions
- Ergonomic shape makes for a reduced circumference compared to non-faceted grips, providing padding and comfort only where you need it, while still feeling the benefits of a 9.5mm grip
- Facets create four edges on grips, which makes for additional points of contact for your hands and added grip
- Includes bar end plugs$50.43 (RRP)Add To Cart
-
Stock Code:WTBTCam-FatPaw-RED
Ergonomic grips with this unique cam profile lets you choose the position that best supports your hand position and style of riding. The 9.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands.
- 36mm installed diameter make these the thickest silicone foam grips available on the market
- 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability
- Tacky texture provides excellent grip with or without gloves in all weather conditions
- Ergonomic shape makes for a reduced circumference compared to non-faceted grips, providing padding and comfort only where you need it, while still feeling the benefits of a 9.5mm grip
- Facets create four edges on grips, which makes for additional points of contact for your hands and added grip
- Includes bar end plugs$50.43 (RRP)Add To Cart
-
Stock Code:WTBTFatPawGrip-BLK
Fat Paw grips were developed for riders who crave large-diameter grips that also have a soft feel. The 9.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands.
- 36mm installed diameter, 11.5mm thick foam
- 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability
- Tacky texture provides excellent grip with or without gloves in all weather conditions
- Includes bar end plugsExpected Date:31 May 2024$50.43 (RRP) -
Stock Code:WTBTFATPAWXLGRIP-BLK
Wolf Tooth Fat Paw Grips XL (extra long) are 25mm longer than our standard Fat Paw grips. The extra length provides room to vary your hand position on the grip or cover exposed handlebar between grip and shifter. Just like the standard Fat Paws they have a large 36mm installed diameter and a soft 100% silicone foam compound to keep your hands comfortable on those all day rides. Bar end plugs with the Wolf Tooth logo are included.
- 36mm installed diameter make these the thickest silicone foam grips available on the market
- 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability
- Tacky texture provides excellent grip with or without gloves in all weather conditions
- Includes bar end plugs$50.00 (RRP)Add To Cart
-
Stock Code:WTBTFatPawGrip-BLU
Ergonomic grips with this unique cam profile lets you choose the position that best supports your hand position and style of riding. The 9.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands.
- 36mm installed diameter make these the thickest silicone foam grips available on the market
- 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability
- Tacky texture provides excellent grip with or without gloves in all weather conditions
- Ergonomic shape makes for a reduced circumference compared to non-faceted grips, providing padding and comfort only where you need it, while still feeling the benefits of a 9.5mm grip
- Facets create four edges on grips, which makes for additional points of contact for your hands and added grip
- Includes bar end plugsExpected Date:31 May 2024$50.43 (RRP)
