HALO
-
Stock Code:HLWL-WHHAGA9VZX
Designed for and tested on the Downhill World Cup Circuit, for lap-crushing confidence.
With a honed 27.5mm internal width, Gravitas wheels offer tyres large sidewall support, while remaining narrow enough to avoid unnecessary rock collisions.
Using our tried and tested asymmetric design we have equalised spoke tensions and built a package that dominates descents, whilst cutting down on bulk where it isn’t needed. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Gravitas offers offset wheel benefits, without compromise.
At the core of these Gravitas wheels are our all-new instantaneous 120 point pick-up MTC Supadrive Boost and MTC Front Boost hubs, with sealed bearings and super-wide spaced flanges for increased stiffness and durability.
100% hand-built and pre-fitted with tubeless tape, Gravitas wheels are tubeless-ready from the box.
- Rear 148x12mm
- Rim Depth 20mm
- Internal Rim Width 27.5mm
- External Rim Width 33mm
- Drillings 32H
- Disc Mount 6 BOLT
- Recommended Tyre size 2.25-2.7"
- Tubeless ready$590.00 (RRP) -
Stock Code:HLWL-WHHAGA9FZ
Designed for and tested on the Downhill World Cup Circuit, for lap-crushing confidence.
With a honed 27.5mm internal width, Gravitas wheels offer tyres large sidewall support, while remaining narrow enough to avoid unnecessary rock collisions.
Using our tried and tested asymmetric design we have equalised spoke tensions and built a package that dominates descents, whilst cutting down on bulk where it isn’t needed. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Gravitas offers offset wheel benefits, without compromise.
At the core of these Gravitas wheels are our all-new instantaneous 120 point pick-up MTC Supadrive Boost and MTC Front Boost hubs, with sealed bearings and super-wide spaced flanges for increased stiffness and durability.
100% hand-built and pre-fitted with tubeless tape, Gravitas wheels are tubeless-ready from the box.
- Front 100mm Hub
- Rim Depth 20mm
- Internal Rim Width 27.5mm
- External Rim Width 33mm
- Drillings 32H
- Disc Mount 6 BOLT
- Recommended Tyre size 2.25-2.7"
- Tubeless ready$490.00 (RRP)Add To Cart
-
Stock Code:HLWL-WHHAGA9BZ
Designed for and tested on the Downhill World Cup Circuit, for lap-crushing confidence.
With a honed 27.5mm internal width, Gravitas wheels offer tyres large sidewall support, while remaining narrow enough to avoid unnecessary rock collisions.
Using our tried and tested asymmetric design we have equalised spoke tensions and built a package that dominates descents, whilst cutting down on bulk where it isn’t needed. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Gravitas offers offset wheel benefits, without compromise.
At the core of these Gravitas wheels are our all-new instantaneous 120 point pick-up MTC Supadrive Boost and MTC Front Boost hubs, with sealed bearings and super-wide spaced flanges for increased stiffness and durability.
100% hand-built and pre-fitted with tubeless tape, Gravitas wheels are tubeless-ready from the box.
- Front Boost 110 x 15mm thru
- Rim Depth 20mm
- Internal Rim Width 27.5mm
- External Rim Width 33mm
- Drillings 32H
- Disc Mount 6 BOLT
- Recommended Tyre size 2.25-2.7"
- Tubeless ready$490.00 (RRP)Add To Cart
-
Stock Code:HLWL-WHHAGA9MZM
Designed for and tested on the Downhill World Cup Circuit, for lap-crushing confidence.
With a honed 27.5mm internal width, Gravitas wheels offer tyres large sidewall support, while remaining narrow enough to avoid unnecessary rock collisions.
Using our tried and tested asymmetric design we have equalised spoke tensions and built a package that dominates descents, whilst cutting down on bulk where it isn’t needed. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Gravitas offers offset wheel benefits, without compromise.
At the core of these Gravitas wheels are our all-new instantaneous 120 point pick-up MTC Supadrive Boost and MTC Front Boost hubs, with sealed bearings and super-wide spaced flanges for increased stiffness and durability.
100% hand-built and pre-fitted with tubeless tape, Gravitas wheels are tubeless-ready from the box.
- Rear Boost 114mm
- Rim Depth 20mm
- Internal Rim Width 27.5mm
- External Rim Width 33mm
- Drillings 32H
- Disc Mount 6 CENTER LOCK
- Recommended Tyre size 2.25-2.7"
- Tubeless ready$590.00 (RRP)Add To Cart
-
Stock Code:HLWL-WHHAGA9CZ
Designed for and tested on the Downhill World Cup Circuit, for lap-crushing confidence.
With a honed 27.5mm internal width, Gravitas wheels offer tyres large sidewall support, while remaining narrow enough to avoid unnecessary rock collisions.
Using our tried and tested asymmetric design we have equalised spoke tensions and built a package that dominates descents, whilst cutting down on bulk where it isn’t needed. To compensate for the differences in wall length and strength of an asymmetric design, the wall thicknesses have been proportioned to balance out impact forces equally. The Gravitas offers offset wheel benefits, without compromise.
At the core of these Gravitas wheels are our all-new instantaneous 120 point pick-up MTC Supadrive Boost and MTC Front Boost hubs, with sealed bearings and super-wide spaced flanges for increased stiffness and durability.
100% hand-built and pre-fitted with tubeless tape, Gravitas wheels are tubeless-ready from the box.
- Front Boost 110 x 15mm thru
- Rim Depth 20mm
- Internal Rim Width 27.5mm
- External Rim Width 33mm
- Drillings 32H
- Disc Mount 6 CENTER LOCK
- Recommended Tyre size 2.25-2.7"
- Tubeless ready$490.00 (RRP)Add To Cart
-
Stock Code:HLWH-HUHASVBH2K
Our MT series hubs are our flagship mountain bike hub range. The MT series encompass everything we feel hubs for mountain biking should offer.
Durability, modularity and light weights make the MT Series a simple choice.
Suited best to XC, trail and enduro bikes alike, the MT Supadrive hub offers a 120 point near instant engagement with the ability to withstand substantial torque loads, such as those found with wide range cassettes. With multiple World Championship titles across a range of disciplines the Supadrive system is tried and tested to the very highest level and is our most advanced and reliable drive system to date.
Wide spoke flanges, sealed cartridge bearings and a Cr-Mo tube axle in the MT Supadrive hub ensure longevity.
Designed to be run with mountain bike gearing, the MT Supadrive hub features an XD driver or alternatively a MTB width HG freehub$349.95 (RRP)Add To Cart
-
Stock Code:HLWH-HUHASVBX2K
Our MT series hubs are our flagship mountain bike hub range. The MT series encompass everything we feel hubs for mountain biking should offer.
Durability, modularity and light weights make the MT Series a simple choice.
Suited best to XC, trail and enduro bikes alike, the MT Supadrive hub offers a 120 point near instant engagement with the ability to withstand substantial torque loads, such as those found with wide range cassettes. With multiple World Championship titles across a range of disciplines the Supadrive system is tried and tested to the very highest level and is our most advanced and reliable drive system to date.
Wide spoke flanges, sealed cartridge bearings and a Cr-Mo tube axle in the MT Supadrive hub ensure longevity.
Designed to be run with mountain bike gearing, the MT Supadrive hub features an XD driver or alternatively a MTB width HG freehub$339.95 (RRP)Add To Cart
-
Stock Code:HLWA-HUHAZM6FA2
End caps and spares for our Halo MT (NON BOOST) Front (formally called Spin Doctor 6F) and FAT Front hubs
$35.00 (RRP)Add To Cart
-
Stock Code:HLWH-HUHAM6F2K
Our MT series hubs are our flagship mountain bike hub range. The MT series encompass everything we feel hubs for mountain biking should offer.
Durability, modularity and light weights make the MT Series a simple choice.
The MT Front hub is our staple front mountain bike hub. From XC to DH the MT Front hubs have it covered.
The MT Front hubs’ super wide flange spacing and sealed cartridge bearings ensure durability.
Included Fittings
- 100 x 15mm thru axle ends. (QR, 20mm thru and Boost adapters available aftermarket)$174.95 (RRP)Add To Cart
-
Stock Code:HLWA-HUHAUFHMC
Replacement freehubs designed to fit Halo MT (6-Bolt) series Supadrive hubs, the MT Supadrive (142mm), MT Supadrive Boost (148mm) and MT Supadrive DH (150mm).
These 11/12 speed ‘MTB’ length format freehubs are NOT cross-compatible with the slightly longer spline (+1.85mm) ROAD format 10/11/12 speed Halo Supadrive freehubs and hub bodies used on the MTC, GXC and RD2 (Centre-Lock) hubs.$179.00 (RRP)Add To Cart
-
Stock Code:HLWH-HUHASVX2K
Our MT series hubs are our flagship mountain bike hub range. The MT series encompass everything we feel hubs for mountain biking should offer.
Durability, modularity and light weights make the MT Series a simple choice.
Suited best to XC, trail and enduro bikes alike, the MT Supadrive hub offers a 120 point near instant engagement with the ability to withstand substantial torque loads, such as those found with wide range cassettes. With multiple World Championship titles across a range of disciplines the Supadrive system is tried and tested to the very highest level and is our most advanced and reliable drive system to date.
Wide spoke flanges, sealed cartridge bearings and a Cr-Mo tube axle in the MT Supadrive hub ensure longevity.
Designed to be run with mountain bike gearing, the MT Supadrive hub features an XD driver or alternatively a MTB width HG freehub. Please refer to the GXC Supadrive for a 11 speed road cassette compatibility.
An additional Boost adaptor kit is also available, to retrofit this hub into Boost compatible frames.$339.95 (RRP)Add To Cart
-
Stock Code:HLWA-HUHAZSVA2H
Replacement axle end cones for the MT Supadrive rear hubs - 12mm thru Shimano HG Cassette. 142, 148 and 157mm O.L.D.
$55.00 (RRP)Add To Cart
-
Stock Code:HLWA-HUHAZSVA2X
Replacement axle end cones for the MT Supadrive rear hubs - 12mm thru SRAM XD Cassette. 142, 148 and 157mm O.L.D.
$39.00 (RRP)Add To Cart
-
Stock Code:HLWH-HUHAM2BF2K
Our MT series hubs are our flagship mountain bike hub range. The MT series encompass everything we feel hubs for mountain biking should offer.
Durability, modularity and light weights make the MT Series a simple choice.
The MT2 Front Boost hub is a ground up design offering optimised flange spacing, and the option for Boost 15mm as well as Boost 20mm.
This hub replaces our hugely popular MT Front Boost Hub.$174.95 (RRP)Add To Cart
-
Stock Code:HLWL-WHHAR6SRS
Classic appeal, modern performance. Our Retro Series are as at home on your modern classic as they are on your retro rebuild.
Our Retro wheels are a modern representation of the rims used throughout Europe in the 1970’s and 80’s. Classic looks, with modern standards and manufacturing processes make the Retro wheelset light, fast and reliable.
Built around our stunning RO hubs featuring our smooth 6Drive system, sealed bearings and a medium high spoke flange.
Retro wheels are finished in a high polished silver finish, for that classic gleaming style.
* HG Freehub fits Shimano and SRAM cassettes up to 12 speed with 11T smallest sprocket.$450.00 (RRP)Add To Cart
-
Stock Code:HLWL-WHHAR6SF
Classic appeal, modern performance. Our Retro Series are as at home on your modern classic as they are on your retro rebuild.
Our Retro wheels are a modern representation of the rims used throughout Europe in the 1970’s and 80’s. Classic looks, with modern standards and manufacturing processes make the Retro wheelset light, fast and reliable.
Built around our stunning RO hubs featuring our smooth 6Drive system, sealed bearings and a medium high spoke flange.
Retro wheels are finished in a high polished silver finish, for that classic gleaming style.
* NOT Tubeless compatible.$290.00 (RRP)Add To Cart
-
Stock Code:HLWR-RMHAR72KC
Classic looks made with modern methods and technology.
Our Retro rims are a lightweight box section rim, perfect for finishing off any classic race build.
Material: Heat Treated T10 extruded alloy
Internal Width: 15mm
External Width: 19.6mm
Rim Depth: 21mm
Joint type: Sleeved
Recommended Tyre size: 23-30c
Eyelets: Stainless Steel
ERD: 596mm
Weight: 435g$130.00 (RRP)Add To Cart
-
Stock Code:HLWR-RMHAR72S
Classic looks made with modern methods and technology.
Our Retro rims are a lightweight box section rim, perfect for finishing off any classic race build.
Material: Heat Treated T10 extruded alloy
Internal Width: 15mm
External Width: 19.6mm
Rim Depth: 21mm
Joint type: Sleeved
Recommended Tyre size: 23-30c
Eyelets: Stainless Steel
ERD: 596mm
Weight: 435g$130.00 (RRP)Add To Cart
-
Stock Code:HLWA-HUHAQEH
The finishing touch to any classically styled road bike.
A pleasing modern tribute to the classic Italian masters of road racing.
Lightweight cut-out Chrome Steel cam handles with Cro-Mo rods and alloy ends.$65.00 (RRP) -
Stock Code:HLWA-HXHASVTB
Our MT Supadrive Boost Disc Adaptor kit turns your standard MT Supadrive rear hub (142mm) into a Boost compatible configuration (148mm).
The kit consists of:
A disc side specific extension end cone
A 6mm interlocking disc rotor spacer
Extra-long disc rotor bolts
Please note: this kit is designed to work with our new generation threaded cr-mo axle (HXHASVTMHG for HG type, HXHASVTMXD for XD type). Our new generation threaded cr-mo axle is retro-fittable to older generation MT Supadrive hubs.
Additionally, once this kit has been fitted the wheel rim will need to be moved across 3mm (re-dished) by a wheel builder to be central.$55.00 (RRP)Add To Cart
-
Stock Code:HLWL-WHHAS6SK
Our SAS wheels need no introduction and have a proven record for re-defining what strength is.
Utilising a 30mm internal, T-10 heat treated alloy rim the SAS wheel set is the go to option for anyone who is looking for reliable and sturdy all use mountain bike wheels.
As well as a hugely capable rim, the SAS wheels utilise our new and improved instantaneous 120 point pickup MT Supadrive and MT Front hubs, with sealed bearings and wide spaced flanges for increased stiffness and durability.
The anodised versions of our SAS rims can also be used with rim brakes. Naturally, the anodised finish will wear and reveal the silver coloured aluminium.
As the braking surface is not CNC finished, there is a bedding in period.
Included Fittings
Rear: 142 x 12mm thru / Shimano HG$550.00 (RRP)Add To Cart
-
Stock Code:HLWR-RMHAS62X
Our SAS rim needs no introduction and has a proven record for re-defining what strength is.
Utilising T-10 heat treated alloy the SAS rim is the go to option for anyone who is looking for a reliable and sturdy all use mountain bike rim.
The anodised versions of our SAS rims can also be used with rim brakes. Naturally, the anodised finish will wear and reveal the silver coloured aluminium.
As the braking surface is not CNC finished, there is a bedding in period.
Rim brakes should not be used on the on white powder coated version.$130.00 (RRP)Add To Cart
-
Stock Code:HLWL-WHHAS6FK
Our SAS wheels need no introduction and have a proven record for re-defining what strength is.
Utilising a 30mm internal, T-10 heat treated alloy rim the SAS wheel set is the go to option for anyone who is looking for reliable and sturdy all use mountain bike wheels.
As well as a hugely capable rim, the SAS wheels utilise our new and improved instantaneous 120 point pickup MT Supadrive and MT Front hubs, with sealed bearings and wide spaced flanges for increased stiffness and durability.
The anodised versions of our SAS rims can also be used with rim brakes. Naturally, the anodised finish will wear and reveal the silver coloured aluminium.
As the braking surface is not CNC finished, there is a bedding in period.
Front: 100 x 15mm thru$290.00 (RRP)Add To Cart
-
Stock Code:HLWA-HUHAGXFHS
Replacement freehubs designed to fit our GXC Supadrive, MTC Supadrive and RD2 Supadrive hubs.
Manufactured from 7075 alloy. Shimano Road HG type freehubs also come with Anti-Bite steel inserts.
The GXC, MTC and RD2 Supadrive HG Freehub is suitable for Road width 11 speed cassettes.
* Please note, these freehubs do not work with the MT Supadrive or MT Supadrive Boost hubs. These can be identified by the 6 bolt disc mount. *$179.00 (RRP)Add To Cart