Wheels MFG BB86>29MM DUB
Description
Expand your choice of cranks for use in frames with 41mm ID shells. Replace your bottom bracket with these dual-row flanged bearings and run 29mm (SRAM DUB) spindle cranks in your frame. These bearings fit directly in frames with 41mm ID bottom bracket shells. Crankset spindle length must be longer than 104mm when used in a 86.5mm wide BB shell.
Complete kit for one frame
Includes:
(2) - Enduro BB86 to 30MM Dual-Row ABEC-3 Bearing
(2) - 0.5mm crank spacer
(2) - 1.0mm crank spacer
(2) - 5.0mm crank spacer
(2) - Dust seals
Bottom Bracket/Frame Interface: BB86, BB92, PF90, BB104/107, PF121, PF132
Bottom Bracket Shell Width: 86.5mm - 132mm
Bottom Bracket Shell I.D.: 41mm
Flange OD: 42mm
Crank Spindle Diameter: 29mm (DUB)
Over Bearing Width: 92mm in 86.5mm wide shell*
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMBB-BBUNIV-SRAM
The BBUNIV-SRAM kit adapts SRAM/Truvativ cranks to virtually any BB/PF30/BB30a frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. For use only with bottom bracket shell widths from 68mm to 83mm.
This kit includes 2 adapter shims and a 15-piece assortment of left and right side spacers.
Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank.
Machined engineering-grade Delrin.$125.00 (RRP)Add To Cart
-
Stock Code:WMBB-T47IN-PRX
T47 threaded BB cups for T47 frames and M30 28/30mm spindle diameter Praxis compatible cranks. Cups have outboard bearings, and can be used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
Bottom Bracket Includes:
BB Cups with bearings
2 - Silicone dust seals
2 - 0.5mm crank spindle spacers
2 - 1.0mm crank spindle spacers
1 - 2.5mm crank spindle spacer
1 - 28mm Insert$245.00 (RRP)Add To Cart
-
Stock Code:BBBB-GXPALT-B3$47.43 (RRP)
Add To Cart
-
Stock Code:CKBB-AAB1Stock Code:CKBB-AAR1Stock Code:CKBB-AAS1Stock Code:CKBB-AAT2Stock Code:CKBB-AAY1Stock Code:CKBB-AABFStock Code:CKBB-AAB2Stock Code:CKBB-AAM2Stock Code:CKBB-AAP1Stock Code:CKBB-AAZ2Stock Code:CKBB-AAG2
REQUIRES A CHRIS KING THREADFIT24 FIT KIT
ThreadFit™ 24 fits 24mm cranks in 68mm BB shells.
Our ThreadFit™ 24 bottom bracket is designed and built to be durable, serviceable, and silent. Manufactured to create the most precise interface between your frame’s bottom bracket shell and your cranks, it makes your cranks spin lightly and easily, without interference, for the lifetime of your bike (with a little regular service). King’s legendary, angular-contact bearings, both steel and ceramic, are the best in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- A Fit Kit is required for use$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP) -
Stock Code:CKBB-ADB2Stock Code:CKBB-ADS1Stock Code:CKBB-ADB1Stock Code:CKBB-ADM2Stock Code:CKBB-ADP1
** FIT KIT REQUIRED FOR USE **
ThreadFit™ T47 24x fits 68mm and 73mm shell widths with 24mm spindles.
It’s a silky smooth, long-lasting bottom bracket built around King’s legendary, angular-contact bearings, either steel or ceramic. These are the best bearings in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- King Lifetime Warranty
- Legendary made-in-house bearings
- Threaded security with PressFit 30 shell stiffness
- A Fit Kit is required for use
- Engineered, manufactured and assembled in Portland, Oregon USA
- Uses Chris King bottom bracket cup tool for installation$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)
