Wheels MFG Double End BB Wrench 48.5/44
Description
Wheels Manufacturing very own double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. Machined aluminum, anodized red.
Compatible with all current Wheels Mfg bottom brackets with notched cups.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-BR-5
Wheels Mfg Bottom Bracket wall chart shows most popular bottom bracket standards and cranksets in an easy to read reference chart detailing the easiest way to determine what bottom bracket, cranks and adapters your shop will need to service most bicycles.
- 24" wide x 36" high
- Printed on one side only$10.00 (RRP)Add To Cart
-
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:WMTL-BP0019
Compatible with all Wheels Manufacturing (SRAM T47) bottom brackets that have the following spline patterns: 52mm, 16-notch 1/2 UNC threaded Press Rod.
SRAM Thin Flange T47 Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. This single-sided socket is used for installing and removing 52mm, 16-notch bottom bracket cups. The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets. Machined 6061 Aluminum Anodized Red.$81.00 (RRP)Add To Cart
-
Stock Code:EVTL-EVTBBCR
The Universal Bottom Bracket Fixed Cup Remover is the fastest way to remove stubborn BB cups, even after flats or splines fail. This unique tool simply pinches the inside of the cup and removes with friction. Huge wrench flats allow for enormous amounts of leverage to be applied so you can get that BB cup out of there quickly!
The EVT Universal BB Cup Remover: A high end bike tool for high speed bike repair.$95.00 (RRP)Add To Cart
-
Stock Code:ABTL-SOCKET-SS-COM
We all know how messy the bottom bracket situation is for modern bikes. We have you covered for almost all of your modern bottom bracket tool needs though. The BB Common was a staple of bottom bracket tools before things got complicated by oversized spindles and press fit. These start as a solid aluminum billet and get precision machined for a nice clean fit. They use a 3/8" square drive for use with your favorite ratchet or torque wrench. We even engrave the default torque spec on them so you don't have to look it up anymore. Starting in 2020 we revised these to be chamferless in an effort to make them work better with extremely thin centerlock lockrings.
Specs: A=46-46.9mm B=42.3mm
Compatibility:
Early Shimano 10spd gen outboard bearing bottom brackets
External spline centerlock lockrings(including Campagnolo)
Race Face "team" bottom brackets
Campagnolo Ultra, Power Torque and Ekar T47 68mm shell width only
SRAM GXP
Chris King Threadfit 24 bottom brackets
Ceramic Speed BSA for 24mm spindles
FSA Mega Exo bottom brackets
Kogel BSA-24 road and mountain bottom brackets
Phil Wood external bottom bracket
Wheels Mfg. BSA Threaded 24 and 24/22 spindles bottom brackets
Many other bottom brackets not listed also use this tool.
Made in Bend Oregon.$76.00 (RRP)Add To Cart
