Abbey Stu Stick Rotor Truing Tool
Description
At bike races I normally try to make the rounds, see what people are up to, show them new tools and get inspiration for new products. Stu Thorne (cyclocrossworld.com) put a common rotor truing tool in my hand and asked me to make it out of aluminum. Apparently traveling with the cyclocrossworld.com? team for a decade he'd learned to travel light.
A few samples later we've got a 44 gram rotor truing tool called the Stu Stick. So whether you want to slip it into your hydration pack for that enduro mountain bike ride or travel the world working with one of the staples of cross racing it's up to the task.
You can even use it to crack open a beer after you're done with the days fun.
Made in Bend Oregon.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-2Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)Expected Date:03 July 2026Expected Date:03 July 2026Expected Date:03 July 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$20.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:EVTL-EVTBG15
The Efficient Velo Tools Bleedin’ Gauge is known as “The Rolex” by racers, coaches, and the national team staff of many nations. The Bleedin’ Gauge is designed, assembled, and pressure tested in the USA at our Washougal, Washington factory using parts and materials sourced from the PNW region.
Every rider/tire/condition combination requires a custom tire pressure solution for the best results. Bleedin’ Gauges dial it in with repeatable accuracy. Inflate high and bleed off to the precise number desired. They’re unaffected by temperature, a fully-serviceable cotton filter protects the mechanism from sealant, and there’s no batteries to die or screens to break. If you’re someone to whom 1/2 of a PSI makes a real difference, you need a Bleedin’ Gauge!
Or just use it to see how far off your floor pump really is.
Available in 5 pressure ranges (in PSI): 0-15, 0-30, 0-60, 0-100, and 0-160. Accuracy is highest in the middle of the dial’s range (but it is also very accurate at the edges too).
*Compatible with Presta valves only. Not compatible with Schrader valves$173.00 (RRP)Add To Cart
-
Stock Code:ABTL-SLPRS-DRVR40MM
This tool make dust wiper installation an easy sure fired task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm.
The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet.
The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time.
Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
Made in Bend Oregon.$56.00 (RRP)Add To Cart
-
Stock Code:ABTL-STD-HRBRDGG
The Harbor gauge, a gorgeous gem of a dishing instrument. These dishing gauges are fully machined from big billets of aluminum to a final shape and accuracy that's as nice to use as it is to look at. Compatible with wheels from 20-29 inches and all hub combinations. Stand off feet are included for checking dish with the tire in place, even the big fat ones. The gauge uses a unique spring loaded mechanism to drop the plunger. Press that little brass button on the front and the plunger will drop to the face of the hub. No archaic time sucking threaded indicators here!
Perhaps the best thing about the Harbor Gauge is the story behind it. The tool started as a computer model like most of our tools but that's as far as it went for a couple of years, until one fateful email from the other side of the world. Tracy Rome contacted us to inquire about a surprise birthday present for her husband Dave's upcoming 30th birthday. Apparently she forgot it the year before and wanted to make the pending day something to remember. So after some secret spy photos of Dave's existing tool collection we pitched her what would become known as the Harbor Gauge. We built that first prototype and commissioned a custom walnut case for it and shipped it to Sydney where the Rome's live. It was one special morning to get a bespoke tool from your favorite bike tool company. At the time it was one of a kind and is a standout favorite in a rather extensive tool collection. Dave said the tool resembles the famed Harbor Bridge in Sydney and that's where the name comes from.
Made in Bend Oregon.$508.00 (RRP)Add To Cart
