Shockwave Quick Drop Fork Dummy
Description
The Quick Drop Fork Dummy lets you remove a fork from a bike in seconds without losing any headset or cockpit hardware. Bearings stay seated, spacers stay in order, and the stem remains aligned while the fork is out. Built for fast bikeshop jobs.
HOW IT WORKS
The tip of the Top Part matches the inner diameter of a standard steerer tube. It is slightly tapered and features a strong integrated neodymium magnet.
Remove your top cap, insert the Quick Drop into the steerer from above, and push the fork downward. As the fork slides down, the tool stays into the steer tube being held by the tight tolerances and the magnet.
You can guide the fork down or lightly pull it while the tool follows smoothly into the headset and frame, holding bearings, spacers, and stem in position.
The lower bearing may stay on the fork during removal. If using the Top + Bottom Kit, place that bearing onto the bottom piece, reinsert both parts into the frame, align them, then rotate 180° to lock the system together.
The magnetic tip also makes reinstallation easier. When guiding the steerer back into position, the magnet helps catch and align the tool instantly, making engagement quick and controlled.
The holding force is strong enough to keep everything composed, even allowing the bike to be turned upside down temporarily if needed during service or short-term storage.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:WMTL-E-BIKESOCKET05Stock Code:WMTL-E-BIKESOCKET03Stock Code:WMTL-E-BIKESOCKET02Stock Code:WMTL-E-BIKESOCKET06Stock Code:WMTL-E-BIKESOCKET01Stock Code:WMTL-E-BIKESOCKET04Stock Code:WMTL-E-BIKESOCKET10Stock Code:WMTL-E-BIKESOCKET09Stock Code:WMTL-E-BIKESOCKET07Stock Code:WMTL-E-BIKESOCKET11Stock Code:WMTL-E-BIKESOCKET08
Compatible with 60mm Gen 1 Bosch Lockring.
Designed to save the mechanic time and money, our new e-bike lockring sockets are machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. • Precision machined aluminum body • Anodized in Wheels MFG red.$72.00 (RRP)$81.00 (RRP)$81.00 (RRP)$81.00 (RRP)$96.00 (RRP)$100.00 (RRP)$81.00 (RRP)$52.00 (RRP)$72.00 (RRP)$81.00 (RRP)$72.00 (RRP) -
Stock Code:PDTL6460710
These quick link pliers make fast work of pesky or stubborn chain master links. The laser cut, heat-treated jaws feature a dual-function design allowing both installation and removal of master links. Cushioned grips provide comfort and control. Compatible with most 6-13 speed derailleur chain master links including SRAM Eagle 12-speed and Flattop chains.
$26.00 (RRP)Add To Cart
-
Stock Code:PDTL6451660
Pro T/L Handle Torx Set - 7 piece
- Made from heat-treated S2 tool steel to ensure the ultimate in strength and lasting performance.
- Ergonomic, soft-plastic, TPR handle for comfort, leverage, and easy handling.
- Includes: T7, T10, T15, T20, T25, T30, and T40 wrenches.
The torx style fastener is quickly becoming standard fare on the modern bicycle. Having the right torx wrenches in the right sizes is essential for the modern mechanic.
Pedro's Pro T/L Torx Wrench Set is up to the challenge and offers features you won't find anywhere else. We started by choosing heat-treated S2 tool steel to ensure the ultimate in strength and lasting performance. We then added extra length to each leg of the wrench offering better leverage and easy access to hard-to-reach bolts. Finally we finished off by over molding the wrenches with an ergonomic, soft plastic, TPR handle that fits in your hand like a glove providing the ultimate in grip and comfort.
Backed by Pedro's lifetime warranty.$100.00 (RRP)Add To Cart
-
Stock Code:ABTL-SLPRS-DRVR35MM
This tool make dust wiper installation an easy sure fired task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm.
The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet.
The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time.
Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
Made in Bend Oregon.$56.00 (RRP)Add To Cart
