Radlabs Syringe Cap Loobtoob Pro 10ml
Description
APC10-2 - Syringe Cap | Loobtoob Pro 10ml
Mobile storage that contains any unwanted mess, Fits 1 Loobtoob Pro 10ml with applicator when not in use.
Fits one Loobtoob Pro 10ml with applicator attached.
3d Printed In House - PETG Prusament.
Contains mess during transportation.
Protects applicator from contaminants and damage.
Fits over syringe and applicator.
DOES NOT FIT BASIC OR ARDES SYRINGES
SYRINGE AND CLIP NOT INCLUDED
NOTE: 3D Printed parts vary in resolution quality and may contain small surface imperfections. This is unavoidable but does not impact cap performance.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-SS-30Stock Code:WMTL-SS-15-25Stock Code:WMTL-SS-17-25Stock Code:WMTL-SS-17-35
Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don't need to spin the handles as far to tighten things up. 15mm thru hole size makes this perfect for use on hubs with larger axles.
Compatible with:
PRESS-4 - Economy Press
PRESS-1 - Large Sealed Bearing Press
PRESS-1 Handle & Rod Assembly
Length: 25mm
OD: 23.8mm
ID: 15.1mm
Machined Aluminum
*Sold individually$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:PDTL6400520
Durable double-ended brush - Ideal for chains, cogs, derailleurs, and chainrings.
Recommended for use with Pedro's cleaner and degreaser products.
Solvent resistant synthetic handle and bristles.
Not recommended for oral use.
Pedro's Toothbrush is designed to tackle the drivetrain and is ideal for cleaning chains, cogs, derailleurs, and chainrings. The ergonomic handle is paired with two purpose built brush features. The tapering length bristles up front are designed to scrub the intricate surfaces of chains, chainrings and cassettes while at the opposite end, longer, stiffer, larger-diameter bristles reach deep between the cassette cogs removing even the deepest dirt and grime.
The Pedro's Toothbrush can also be a great tool for applying degreaser to drivetrain parts. While holding the Toothbrush flat with the bristles out to the side, pour degreaser to the bristles. Then quickly move the toothbrush to the drivetrain and apply the degreaser using a light scrubbing motion. This technique works especially well with Pedro's Degreaser 13.$12.00 (RRP)Add To Cart
-
Stock Code:EVTL-EVTBG15
The Efficient Velo Tools Bleedin’ Gauge is known as “The Rolex” by racers, coaches, and the national team staff of many nations. The Bleedin’ Gauge is designed, assembled, and pressure tested in the USA at our Washougal, Washington factory using parts and materials sourced from the PNW region.
Every rider/tire/condition combination requires a custom tire pressure solution for the best results. Bleedin’ Gauges dial it in with repeatable accuracy. Inflate high and bleed off to the precise number desired. They’re unaffected by temperature, a fully-serviceable cotton filter protects the mechanism from sealant, and there’s no batteries to die or screens to break. If you’re someone to whom 1/2 of a PSI makes a real difference, you need a Bleedin’ Gauge!
Or just use it to see how far off your floor pump really is.
Available in 5 pressure ranges (in PSI): 0-15, 0-30, 0-60, 0-100, and 0-160. Accuracy is highest in the middle of the dial’s range (but it is also very accurate at the edges too).
*Compatible with Presta valves only. Not compatible with Schrader valves$175.00 (RRP)Add To Cart
-
Stock Code:PDTL6460296
Pro BB Wrench, BSA30/DUB 12x46
- Precision laser cut design with ergonomic cushioned TPR grip and 3/8" drive for use with torque wrenches.
- Superior material and optimized heat treatment outlast the competition.
- Fits 12-notch x 46mm diameter external bearing bottom bracket cups.
Pedro's Pro BB flat wrenches are made from 4mm thick, precision laser cut, heat-treated tool steel for maximum strength and lasting performance.
Features an ergonomic single-ended design with cushioned TPR grip for leverage & comfort and fits 12-notch external bearing bottom bracket cups including SRAM® DUB™, Zipp® Vuma™, Race Face® Cinch™, Rotor® BSA30, Hawk Racing™ BB3086™, and others.$50.00 (RRP)Add To Cart
-
Stock Code:ABTL-STD-LVRSTTR
The lever setter is a unique tool that works in conjunction with our HAG to set brake and shifter levers at the same height from side to side. The tool temporarily replaces the headset top cap and allows you to thread a hanger alignment tool into the lever setter. Then you can use the HAG indicator to set levers the same from one side of the bar to the other. It's a great little fitting tool to eliminate variables in your bike fit. It's also great to balance the variations in bends that metal bars sometimes have from one side to the other. Once you're satisfied with your lever placement simply remove the tool and replace your headset top cap and go ride.
Recommendations:
It's advised to use a spacer on top of the stem to help align the lever setter with the steer tube. This will reduce the impact the quality of the cut on the steer tube has on the function of the tool. The supplied threaded stud can be replaced with a longer one if needed.
H.A.G. sold separately.
Made in Bend Oregon$74.00 (RRP)Add To Cart
