EVT Bleedin Gauge 15PSI
Description
The Efficient Velo Tools Bleedin’ Gauge is known as “The Rolex” by racers, coaches, and the national team staff of many nations. The Bleedin’ Gauge is designed, assembled, and pressure tested in the USA at our Washougal, Washington factory using parts and materials sourced from the PNW region.
Every rider/tire/condition combination requires a custom tire pressure solution for the best results. Bleedin’ Gauges dial it in with repeatable accuracy. Inflate high and bleed off to the precise number desired. They’re unaffected by temperature, a fully-serviceable cotton filter protects the mechanism from sealant, and there’s no batteries to die or screens to break. If you’re someone to whom 1/2 of a PSI makes a real difference, you need a Bleedin’ Gauge!
Or just use it to see how far off your floor pump really is.
Available in 5 pressure ranges (in PSI): 0-15, 0-30, 0-60, 0-100, and 0-160. Accuracy is highest in the middle of the dial’s range (but it is also very accurate at the edges too).
*Compatible with Presta valves only. Not compatible with Schrader valves
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:WMTL-BENCHTOPMAT1-1
You probably know that it's important to keep your workbench clean and organized, but it can be tough to do this when you're working on bikes. Parts and tools tend to scatter everywhere, and before you know it your bench is covered in grease, grime and you are missing half the parts.
Wheels Manufacturing has the perfect solution - the Ultimate Bike Benchtop Mat. This mat is designed specifically for keeping your workbench clean and organized while you work on your bike. The mat has an extra large work area, compartments for parts, tools, and components, so everything is within reach and easy to find. Plus, the mat has useful tools built in like metric and imperial rulers, ball bearing and sealed bearing gauges which make it easier to identify the parts you need when working on your bike. Don't go another day without this essential tool in your cycling arsenal.
- Built in gauge to easily and accurately identify outside and inside diameter of sealed bearings.
- Identifying ball bearing has never been easier with this ramped gauge that lets ball bearings roll into their identifying slot.
- Convenient metric and imperial ruler to quickly measure components
Benchtop mat details:
- Durable rubber-like PVC construction. Cleans easily and looks great on any bench
- Overall size 20”x12-¾” (Larger than other mats on the market)
- 12”x9.5” raised work area
- Imperial Ruler 0-12in
- Metric Ruler 0-48cm
- 4 sloped pockets
- 5 deep pockets
- Sealed bearing gauge
- Ball bearing gauge (1/8, 5/32, 3/16, 7/32, 1/4, 5/16)$129.00 (RRP)Add To Cart
-
Stock Code:PDTL6400520
Durable double-ended brush - Ideal for chains, cogs, derailleurs, and chainrings.
Recommended for use with Pedro's cleaner and degreaser products.
Solvent resistant synthetic handle and bristles.
Not recommended for oral use.
Pedro's Toothbrush is designed to tackle the drivetrain and is ideal for cleaning chains, cogs, derailleurs, and chainrings. The ergonomic handle is paired with two purpose built brush features. The tapering length bristles up front are designed to scrub the intricate surfaces of chains, chainrings and cassettes while at the opposite end, longer, stiffer, larger-diameter bristles reach deep between the cassette cogs removing even the deepest dirt and grime.
The Pedro's Toothbrush can also be a great tool for applying degreaser to drivetrain parts. While holding the Toothbrush flat with the bristles out to the side, pour degreaser to the bristles. Then quickly move the toothbrush to the drivetrain and apply the degreaser using a light scrubbing motion. This technique works especially well with Pedro's Degreaser 13.$12.00 (RRP)Add To Cart
-
Stock Code:RLTL-AMC10-2
AMC10-2 - Mountable Clip | Loobtoob Pro 10ml
Mountable Clip that holds one Loobtoob Pro 10ml with applicator when not in use-
Fits one PRO 10ml Syringe with applicator attached.
3d Printed in house - PETG Prusament
Secure fitment
Mounting Screws / Rivets not included
DOES NOT FIT BASIC OR ARDES SYRINGES$15.00 (RRP)Add To Cart
-
Stock Code:SWTL-DUM-STEM-XL
The StemStation combines the speed of the QuickDrop with the convenience of a top tube-mounted workstation. It allows you to remove your cockpit in seconds, transfer the complete stem and spacer stack directly into a secure workstation, service your headset with everything organized, then reinstall the entire assembly just as quickly.
No balancing parts, no scattered spacers, and no rebuilding your cockpit from scratch.
Important Compatibility Info
- Compatible with virtually all mountain bikes and most e-bikes.
- The extra-wide TPU strap fits a broad range of top tube sizes and frame shapes.
- Soft TPU contact pads with flexible anti-slip ribs conform to the frame while protecting the paint.
- The Standard magnetic support post accommodates approximately 70 mm (2.75") of stem and spacer stack.
- The XL model is 100 mm (4") support post is for exceptionally tall cockpit stacks.$61.00 (RRP)
