Radlabs Mountable Clip Loobtoob Pro 10ml
Description
AMC10-2 - Mountable Clip | Loobtoob Pro 10ml
Mountable Clip that holds one Loobtoob Pro 10ml with applicator when not in use-
Fits one PRO 10ml Syringe with applicator attached.
3d Printed in house - PETG Prusament
Secure fitment
Mounting Screws / Rivets not included
DOES NOT FIT BASIC OR ARDES SYRINGES
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-2Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)Expected Date:15 December 2026Expected Date:15 December 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$20.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:PDTL6450695
TOOLS NOT INCLUDED.
Versatile design features 20 pockets and fits tools up to 13.75" (350mm) in length.
Unfold flat on a bench or hang by integrated grommets to save space.
Durable construction and waterproof exterior keeps tools protected.
Compact and perfect for the car, traveling to an event, or a minimalist home shop setup.
Hungry to get your tools organized, protected, and ready for action? Then chow down on the Pedro's Burrito Tool Wrap. Designed in conjunction with our Starter Tool Kit, this wrap is designed for versatility and convenience. Twenty pockets offer ample space for all your tools. Unroll flat on a bench or hang by the integrated grommets and find your tools displayed over the roomy 21" x 15" surface. When its time to pack up, the waterproof exterior and internal flap keep you tools protected and velcro straps keep everything in check. Still hungry? Your favorite Pedro's floor pump fits perfectly in the Burrito straps.$72.00 (RRP)Add To Cart
-
Stock Code:ABTL-WSHBDDY-V1
The wash buddy clamps firmly into the rear drop out and has the ability to not only hold the chain but allow for full crank rotation and changing of cogs. This allows you plenty of room to clean and inspect your drive train while washing your bike or doing maintenance.
We tested these for over 2 years on the pro circuit to ensure you will have a durable tool for years to come. The stainless spindle will hold up to all of the solvents, water and grit that these tools get soaked in every time you use them. The Delrin pulley has great solvent resistance as well.
Our Delrin pulleys are available separately for use with thru axle bikes. Simply remove your wheel and slide the pulley over your factory thru axle for a nice secure solution. It's a great way to ship bikes as well.
Made in Bend Oregon.$114.00 (RRP)Add To Cart
-
Stock Code:ABTL-4WAY3452JIS
The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket.
Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag.
The next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night.
Custom bit option: Hex Bits: 3, 4, 5, #2 jis (DIN) compatible Phillips (aka cross point)$82.00 (RRP)Add To Cart
-
Stock Code:PDTL6006024
New adapter offers precise fit on Pedro's grease tubes: 6315031, 6215031, & 6195031.
Remove adapter to fit 6205031, older Pedro's grease tubes, and other 9/16-20 UNF tubes.$46.00 (RRP)Add To Cart
