Pedros Burrito Tool Wrap
Description
TOOLS NOT INCLUDED.
Versatile design features 20 pockets and fits tools up to 13.75" (350mm) in length.
Unfold flat on a bench or hang by integrated grommets to save space.
Durable construction and waterproof exterior keeps tools protected.
Compact and perfect for the car, traveling to an event, or a minimalist home shop setup.
Hungry to get your tools organized, protected, and ready for action? Then chow down on the Pedro's Burrito Tool Wrap. Designed in conjunction with our Starter Tool Kit, this wrap is designed for versatility and convenience. Twenty pockets offer ample space for all your tools. Unroll flat on a bench or hang by the integrated grommets and find your tools displayed over the roomy 21" x 15" surface. When its time to pack up, the waterproof exterior and internal flap keep you tools protected and velcro straps keep everything in check. Still hungry? Your favorite Pedro's floor pump fits perfectly in the Burrito straps.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:BBTL-TO-BOTTOMBRACKET5$51.57 (RRP)
Add To Cart
-
Stock Code:WMTL-ST0010Stock Code:WMTL-ST0009Stock Code:WMTL-ST0008
Precision machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components during service. Designed with strong magnet inserts to keep the shaft clamps securely in place when used with a vice clamp.
Includes 1 pairs of of shaft clamps to fit shaft diameters:
8mm
9mm
10mm
12.7mm
15mm
15.9mm
16.7mm$137.00 (RRP)$137.00 (RRP)$137.00 (RRP) -
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Expected Date:02 November 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:PDTL6450410
This compact folding utility knife will quickly find a home in your pack, in the shop, or at home. Stainless and aluminum construction provide a balance of low weight and durability, ready for years of daily use. Easily operable with one hand the folding design locks open during use and folds to half its size, perfect in a pocket or clipped to a belt, always ready for the next job
- Stainless and aluminum construction.
- Folding design locks open during use.
- Uses standard replaceable blades.$32.00 (RRP)Add To Cart
-
Stock Code:SWTL-TRVL-CLP-DH
Long-travel version of the CoilClip designed for downhill and longer stroke coil shocks.
What it does:
Coil shocks do not use sag rings like air shocks, so it is difficult to see actual travel usage.
The CoilClip clips directly onto the spring and moves as the shock compresses during riding.
The DH version uses a longer piston body designed for longer springs and longer shock strokes.
It gives a quick visual way to check travel usage, bottom-out, spring setup, and suspension tuning without disassembling the shock.
Compatibility & included parts:
Fits most trail, enduro, and DH coil shocks
Designed for approximately 67.5 mm to 75+ mm stroke shocks
Works with most standard coil springs
Longer piston body for longer spring lengths
Included:
Tracker body
2 sag rings
3 × S clips (Includes 1 spare)
3 × M clips (Includes 1 spare)
3 × L clips (Includes 1 spare)
Clip gauge tool
The clip gauge helps you quickly determine which clip size fits your spring.
Choose the clip that feels snug without excessive force.
Too loose = may slip.
Too tight = may damage the clip$39.00 (RRP)Add To Cart
