Pedros Shop Chain Tool
Description
The Shop Chain Tool is a workhorse designed to make chain removal, installation, and adjustments simple, safe, and comfortable. This shop quality screw-type chain tool is ready for years of professional use with a bearing mounted pin, replaceable bridge, and adjustable bridge positioning ensure compatibility with all current and future chains including SRAM Flattop chains.
Replaceable bridge and adjustable bridge positioning ensure compatibility with all current and future chains from single to 13-speed and beyond including SRAM® Flattop chains.
S2 tool steel pin freely spins on a ball bearing ensuring long life, lower effort, and better alignment.
Integrated guide pin shear slot.
Replacement pin stored in handle.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:PDTL6460632
Pedro's Fixed Torque Drivers are shop quality preset torque wrenches designed with an infinite torque-limiting clutch design to eliminate over-torquing of critical parts. Each wrench is calibrated using a torque calibration analyzer accurate to +/- 1 percent and is then tested 5 times prior to packaging with results recorded on the product card along with the date.
Infinite torque-limiting clutch design eliminates over-torquing.
Magnetic socket drive accepts standard 1/4" hex bits. 4mm, 5mm, & T25 bits included.
Ergonomic handle design provides comfort and control and stores extra bits.$75.00 (RRP)Add To Cart
-
Stock Code:ABTLABTMIPRESS
The Micro Modular Bearing Press is designed with smaller hub and suspension bearings in mind. With drifts to service bearings with an inside diameter of 13 millimeters and smaller this is a great choice for those smaller more delicate bearings.
The press head features a true thrust bearing, this unique feature keeps the press action super smooth and cuts down on the effort required. The thrust bearing isolates all of the torque from the compression which allows your bearing to go in square. It works so well that you don't need even need handles.
The press head has a 6mm hex in the top of the press head so you can use it as a bail out gear in case you find something that is fitting excessively tight.
Drifts included to precisely fit bearing sizes:
608
608_9
609
619
688
6000
6001
6701
6800
6801
6802
6900
6901
6902
Made in Bend Oregon.$635.00 (RRP)Add To Cart
-
Stock Code:EVTL-EVTBG30
The Efficient Velo Tools Bleedin’ Gauge is known as “The Rolex” by racers, coaches, and the national team staff of many nations. The Bleedin’ Gauge is designed, assembled, and pressure tested in the USA at our Washougal, Washington factory using parts and materials sourced from the PNW region.
Every rider/tire/condition combination requires a custom tire pressure solution for the best results. Bleedin’ Gauges dial it in with repeatable accuracy. Inflate high and bleed off to the precise number desired. They’re unaffected by temperature, a fully-serviceable cotton filter protects the mechanism from sealant, and there’s no batteries to die or screens to break. If you’re someone to whom 1/2 of a PSI makes a real difference, you need a Bleedin’ Gauge!
Or just use it to see how far off your floor pump really is.
Available in 5 pressure ranges (in PSI): 0-15, 0-30, 0-60, 0-100, and 0-160. Accuracy is highest in the middle of the dial’s range (but it is also very accurate at the edges too).
*Compatible with Presta valves only. Not compatible with Schrader valves$175.00 (RRP)Add To Cart
-
Stock Code:ABTL-4WAY4562JIS
The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket.
Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag.
The next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night.
Custom bit option: Hex Bits: 4, 5, 6, #2 jis (DIN) compatible Phillips (aka cross point)$82.00 (RRP)Add To Cart
