Pedros Pro BB Wrench BSA30/DUB 12x46mm
Description
Pro BB Wrench, BSA30/DUB 12x46
- Precision laser cut design with ergonomic cushioned TPR grip and 3/8" drive for use with torque wrenches.
- Superior material and optimized heat treatment outlast the competition.
- Fits 12-notch x 46mm diameter external bearing bottom bracket cups.
Pedro's Pro BB flat wrenches are made from 4mm thick, precision laser cut, heat-treated tool steel for maximum strength and lasting performance.
Features an ergonomic single-ended design with cushioned TPR grip for leverage & comfort and fits 12-notch external bearing bottom bracket cups including SRAM® DUB™, Zipp® Vuma™, Race Face® Cinch™, Rotor® BSA30, Hawk Racing™ BB3086™, and others.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-2Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$20.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:WMTL-SP-GAUGE-1
The Wheels Manufacturing Seatpost Gauge is the quick, accurate tool for determining the inside diameter of your bike’s seat tube, so you can identify the correct seatpost size without guesswork.
Made from durable acrylic, this gauge is built to last and sized just right for shop benches, toolboxes, and trailhead tool kits. Whether you’re a professional mechanic, shop tech, or DIY rider, it’s a simple solution that saves time and ensures proper fit. Covers 24 common seatpost sizes, from 25mm up to 34.9mm, including all the in-between sizes you’re likely to encounter.
Just insert the gauge into the seat tube until it fits snugly, no batteries, no guesswork.
Features:
- Precision-cut acrylic gauge for long-lasting use
- Measures seat tube inside diameters from 25mm to 34.9mm
- Includes common sizes: 25.0, 25.4, 25.6, 25.8, 26.0, 26.2, 26.4, 26.8, 27.0, 27.2, 27.4, 28.2, 28.6, 28.8, 29.2, 29.4, 30.0, 30.2, 30.4, 30.8, 30.9, 31.4, 31.6, 31.8, 34.9
- Compact, lightweight, and easy to use.$20.00 (RRP)Add To Cart
-
Stock Code:PDTL6450515G
Head rebuild kit for current Super Prestige floor pump.
Includes cap and gasket.$6.00 (RRP)Add To Cart
-
Stock Code:ABTL-FITKIT
This set of tools allows accurate and repeatable measurements for saddle height, angle and setback. The accuracy and repeatable measurements also serve as a base to make adjustments to fit.
The magnetic saddle height bullets (8mm and 10mm sizes) ensure you get an accurate center at the bottom bracket by locating in the crank arm fixing bolt or the crank arm preload cap of Shimano caps. This allows you to focus on the smart end of the tape measure at the saddle plate.
Two reference marks on the saddle plate means you can pull a measurement to the exact same spot relative to the nose of the saddle every time. This gives you accuracy down to a single millimeter, enough to satisfy the most particular or injury prone athlete.
The front of the saddle plate is engraved with a ruler (metric of course) to allow you to calculate saddle setback at the saddle. This allows you to drop the plumb bob off the side of the bike and clear all of the bottle cages.
The wide plate has ample room to mount a level, protractor or smart phone for adjusting the angle of the saddle. This is particularly helpful for non traditional saddles like SMP and Adamo. This kit is ideal for cyclists that travel and regularly have to re-assemble their bike, bike fitters and mechanics in the workshop and in the field.
The complete kit includes the saddle plate, Shimano preload crank tool, two saddle height bullets (8mm and 10mm). The Shimano preload crank tool and saddle height bullets can be purchased separately.
Made in Bend Oregon.$266.00 (RRP) -
Stock Code:ABTL-TWAY-MAGONLY
BASE TOOL ONLY NO BITS.
The Abbey Bike Tools T way precision multi-tool is a great addition to the shop at home or work. This is built as a more robust multi use tool than our compact 4 way using the same durable stainless steel our Crombie heads use.
Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits from WERA that fit like a glove into the bolts on your modern bike. They won't strip out fasteners like the cheap offshore made tools that are so common in the bike world.
The next part of the multi-tool is the chassis, for this we used our favorite US drawn stainless steel alloy and built a frame to hold the bits. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or assembling your bike for a fly away trip.$125.00 (RRP)
