EVT Knuckle Saver Pedal Wrench Adapt 6mm
Description
The Knuckle Saver Pedal Wrench Adaptor helps removing stubborn hex-mounted pedal spindles, and is available in 6 and 8 mm versions.
Combine this tool with a pedal wrench to easily and safely remove or install. Position your hands for maximum leverage while ensuring they don't impact anything but air when it breaks loose. The knurled surface helps you spin it on and off.
Knuckle Savers work with any pedal wrench. This tool is also helpful with tight 8mm crank anchor bolts, especially self-extracting ones. Ergonomics are incalculably better than a naked hex wrench. Your tendons, joints and knuckles will thank you!
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punch$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:PDTL6451150
Six-inch diameter bowl in bright Pedro's yellow for contrast.
Extra powerful magnet holds parts in place even if bowl tips or falls.
Few experiences are worse than losing a critical part during an installation or repair. Often times you spend more time trying to locate the part than the job itself! This is why Pedro's offers it Magnetic Parts Tray. The six-inch diameter bowl features an extra powerful magnet and bright yellow color keeping small parts safe and easy to access. Backed by Pedro's lifetime warranty.$30.00 (RRP)Add To Cart
-
Stock Code:EVTL-EVTCASS
The Cassette Body Service Tool allows for removal of the R-H bearing race inside most Shimano and Shimano-copy cassette bodies.
This tool is made of heat-treated 4140 cro-mo tool steel.$68.00 (RRP) -
Stock Code:ABTL-SLPRS-DRVR40MM
This tool make dust wiper installation an easy sure fired task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm.
The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet.
The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time.
Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
Made in Bend Oregon.$56.00 (RRP)Add To Cart
-
Stock Code:ABTL-HAMMERTI-SFTFC
The soft face on the Titanium Hammer is destined to be gouged, get worn down, or even melt (if you leave it near heat).
Here is the replacement to make the hammer like new.
USA Made.$19.00 (RRP)Add To Cart
