Abbey Fork Seal Press Handle
Description
The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-TIE-BLACK
Wheels MFG Zip Ties 200x2.5mm Black 100 piece
Light-duty zip tie
•200mm length x 2.5mm
•100 pieces
•Available in Black or Clear$21.00 (RRP)Add To Cart
-
Stock Code:WMTL-SS-30Stock Code:WMTL-SS-15-25Stock Code:WMTL-SS-17-25Stock Code:WMTL-SS-17-35
Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don't need to spin the handles as far to tighten things up. 15mm thru hole size makes this perfect for use on hubs with larger axles.
Compatible with:
PRESS-4 - Economy Press
PRESS-1 - Large Sealed Bearing Press
PRESS-1 Handle & Rod Assembly
Length: 25mm
OD: 23.8mm
ID: 15.1mm
Machined Aluminum
*Sold individually$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:WMTL-SS-30Stock Code:WMTL-SS-15-25Stock Code:WMTL-SS-17-25Stock Code:WMTL-SS-17-35
Another must-have tool for the busy bike shop. Our machined aluminum Speed Spacers take up extra space on our bearing presses so you don't need to spin the handles as far to tighten things up. 15mm thru hole size makes this perfect for use on hubs with larger axles.
Compatible with:
PRESS-4 - Economy Press
PRESS-1 - Large Sealed Bearing Press
PRESS-1 Handle & Rod Assembly
Length: 25mm
OD: 23.8mm
ID: 15.1mm
Machined Aluminum
*Sold individually$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:ABTL-FITKIT
This set of tools allows accurate and repeatable measurements for saddle height, angle and setback. The accuracy and repeatable measurements also serve as a base to make adjustments to fit.
The magnetic saddle height bullets (8mm and 10mm sizes) ensure you get an accurate center at the bottom bracket by locating in the crank arm fixing bolt or the crank arm preload cap of Shimano caps. This allows you to focus on the smart end of the tape measure at the saddle plate.
Two reference marks on the saddle plate means you can pull a measurement to the exact same spot relative to the nose of the saddle every time. This gives you accuracy down to a single millimeter, enough to satisfy the most particular or injury prone athlete.
The front of the saddle plate is engraved with a ruler (metric of course) to allow you to calculate saddle setback at the saddle. This allows you to drop the plumb bob off the side of the bike and clear all of the bottle cages.
The wide plate has ample room to mount a level, protractor or smart phone for adjusting the angle of the saddle. This is particularly helpful for non traditional saddles like SMP and Adamo. This kit is ideal for cyclists that travel and regularly have to re-assemble their bike, bike fitters and mechanics in the workshop and in the field.
The complete kit includes the saddle plate, Shimano preload crank tool, two saddle height bullets (8mm and 10mm). The Shimano preload crank tool and saddle height bullets can be purchased separately.
Made in Bend Oregon.$266.00 (RRP)Add To Cart
-
Stock Code:ABTL-STUSTICK
At bike races I normally try to make the rounds, see what people are up to, show them new tools and get inspiration for new products. Stu Thorne (cyclocrossworld.com) put a common rotor truing tool in my hand and asked me to make it out of aluminum. Apparently traveling with the cyclocrossworld.com? team for a decade he'd learned to travel light.
A few samples later we've got a 44 gram rotor truing tool called the Stu Stick. So whether you want to slip it into your hydration pack for that enduro mountain bike ride or travel the world working with one of the staples of cross racing it's up to the task.
You can even use it to crack open a beer after you're done with the days fun.
Made in Bend Oregon.$45.00 (RRP)Add To Cart
