Abbey Modular Bearing PressTeam NoHandle
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-2Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)Expected Date:15 December 2026Expected Date:15 December 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$20.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:RLTL-LTPK50S
This Is Kit Includes:
1. LTP50 - Loobtoob Pro 50ml Syringe
1. Fluid Hose
1. Radar Laboratories Sticker
1. RADLABS Holographic Sticker
1. Set of Replacement Syringe Seals
LTP00 - Loobtoob Pro 50ml Syringe
Crushproof fully featured Pro syringe with a 100ml capacity.
Can contain and dispense almost any semi-solid material.
Luer-Lock fitting accepts any attachment.
Luer-Lock Compatible
Crushproof Premium Construction
Stainless Connection Fitting with O-Ring
Replaceable O-Ring Sealing Plunger
Ergonomic Dispensing Handle
1ml Graduation Marks
Brass Plunger Rod with Dosing / Locking Nut
Includes Loobtoob Label (not applied)
Includes Replacement O-Rings
Guaranteed for life!
SNS880 - Sealant and Suspension Hose 8x80mm
Silicone tube is durable and flexible fitting in and over many situations.
Can contain and dispense almost any semi-solid material.
Luer-Lock fitting accepts any attachment.
Luer-Lock Compatible
Silicone construction does not allow fluids to stick
8mm OD fits in many suspension applications
5mm ID fits around tubeless valves
Guaranteed For Life!$30.00 (RRP) -
Stock Code:ABTL-SLPRS-DRVR36MM
This tool make dust wiper installation an easy sure fired task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm.
The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet.
The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time.
Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
Made in Bend Oregon.$56.00 (RRP)Add To Cart
-
Stock Code:ABTL-HAMMERTI-ESI
Replacement ESI Grip for the Titanium Hammer laser engraved with the Abbey Logo.
USA Made.$19.00 (RRP) -
Stock Code:ABTL-TWAY-MAGONLY
BASE TOOL ONLY NO BITS.
The Abbey Bike Tools T way precision multi-tool is a great addition to the shop at home or work. This is built as a more robust multi use tool than our compact 4 way using the same durable stainless steel our Crombie heads use.
Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits from WERA that fit like a glove into the bolts on your modern bike. They won't strip out fasteners like the cheap offshore made tools that are so common in the bike world.
The next part of the multi-tool is the chassis, for this we used our favorite US drawn stainless steel alloy and built a frame to hold the bits. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or assembling your bike for a fly away trip.$125.00 (RRP)Add To Cart
