Pedros Hex Bit Set II - 18 piece
Description
Pedro's Hex Bit Set II is designed to work with our torque wrenches offering an extensive range to handle most hex and torx needs. The set includes longer 50mm bits in key sizes to ensure compatibility and fit with all components where standard 25mm bits fall short. Bits are made from premium S2 tool steel for strength and lasting performance.
Set includes:
Hex 2, 2.5, 3, 4, 5, 6, & 8mm (25mm), 4 & 5mm (50mm)
Torx T10, T15, T20, T25, & T30 (25mm), T25 & T30 (50mm)
Drive Adapters 1/4" square to 1/4" hex & 1/4" hex to 1/4" square
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-BP0004
This drift and over axle set is used to install less common-sized thru-axle and frame sealed bearings.
Compatible with the 3/8 Wheels Mfg. BP0001, BP0005, Press 1 handles and rod.
Originally Driftset-Hub1
Contains the following Open Bore Drift sizes:
(2) 6000 Open Bore
(2) 6001 Open Bore
(2) 6002 Open Bore
(2) 6003 Open Bore
(2) 6801 Open Bore
(2) 6805 Open Bore
(2) 6900 Open Bore
(2) 6904 Open Bore
(2) 17x28 Open Bore
Contains the following Over Axle Drift sizes:
(2) 6000 Over Axle
(2) 6001 Over Axle,
(2) 6002 Over Axle,
(2) 6003 Over Axle
(2) 6900 Over Axle,
Contains the following speed spacers:
(2) Frame Linkage Standoff 20
(2) Frame Linkage Standoff 30
(2) Speed Spacer 30mm
(1) Speed Spacer 15x25
(1) Speed Spacer 15x35
(1) Speed Spacer 17x25
(1) Speed Spacer 17x35
(1) Speed Spacer 20x25
(1) Speed Spacer 20x35$295.00 (RRP)Add To Cart
-
Stock Code:PDTL6463226
Rx Micro multi-tools deliver the perfect balance of size, weight, and function, ready for trailside repairs and daily adjustments. Designed for performance and durability with 6061 aluminum body, premium CrMo tool steel bits, and an anti-corrosion finish backed by our Rust-Free Guarantee.
Backed by Pedro's Lifetime Warranty and Rust-Free Guarantee
Hex Wrenches: 2, 2.5, 3, 4, 5, 6, 8mm.
T25 and T30 torx and Flat Blade screwdriver.
1-13 speed Chain Tool with integrated: 7 & 8mm Flare Box Wrenches, 3.23, 3.30, & 3.45 Spoke Wrenches, Shimano Crank Cap Tool, and Presta Valve Core Tool.
Micro Levers with integrated Quick Link Storage.
160 grams.$88.00 (RRP)Add To Cart
-
Stock Code:EVTL-EVTBG100
The Efficient Velo Tools Bleedin’ Gauge is known as “The Rolex” by racers, coaches, and the national team staff of many nations. The Bleedin’ Gauge is designed, assembled, and pressure tested in the USA at our Washougal, Washington factory using parts and materials sourced from the PNW region.
Every rider/tire/condition combination requires a custom tire pressure solution for the best results. Bleedin’ Gauges dial it in with repeatable accuracy. Inflate high and bleed off to the precise number desired. They’re unaffected by temperature, a fully-serviceable cotton filter protects the mechanism from sealant, and there’s no batteries to die or screens to break. If you’re someone to whom 1/2 of a PSI makes a real difference, you need a Bleedin’ Gauge!
Or just use it to see how far off your floor pump really is.
Available in 5 pressure ranges (in PSI): 0-15, 0-30, 0-60, 0-100, and 0-160. Accuracy is highest in the middle of the dial’s range (but it is also very accurate at the edges too).
*Compatible with Presta valves only. Not compatible with Schrader valves$173.00 (RRP)Add To Cart
-
Stock Code:ABTL-SLPRS-DRVR32MM
This tool make dust wiper installation an easy sure fired task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm.
The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet.
The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time.
Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
Made in Bend Oregon.$56.00 (RRP)Add To Cart
-
Stock Code:ABTL-STD-LVRSTTR
The lever setter is a unique tool that works in conjunction with our HAG to set brake and shifter levers at the same height from side to side. The tool temporarily replaces the headset top cap and allows you to thread a hanger alignment tool into the lever setter. Then you can use the HAG indicator to set levers the same from one side of the bar to the other. It's a great little fitting tool to eliminate variables in your bike fit. It's also great to balance the variations in bends that metal bars sometimes have from one side to the other. Once you're satisfied with your lever placement simply remove the tool and replace your headset top cap and go ride.
Recommendations:
It's advised to use a spacer on top of the stem to help align the lever setter with the steer tube. This will reduce the impact the quality of the cut on the steer tube has on the function of the tool. The supplied threaded stud can be replaced with a longer one if needed.
H.A.G. sold separately.
Made in Bend Oregon$74.00 (RRP)Add To Cart
