Wheels MFG PRESS-1 Handle & Rod Assembly
Description
Replacement Handle Assembly for our Large Sealed Bearing Press (PRESS-1).
(1) Machined fixed end aluminum "T" Handle with brass insert.
(1) Machined non-fixed end aluminum "T" Handle with brass insert.
(1) 3/8" x 12" Threaded Rod
(1) M5x12 flat head screw to secure fixed-end handle to rod
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:WTTLFWI-CISStock Code:WTTLFWI-H16Stock Code:WTTLFWI-H8Stock Code:WTTLFWI-KIT-01Stock Code:WTTLFWI-LRStock Code:WTTLFWI-S20Stock Code:WTTLPACKWRENCH
Ultralight Cinch and ISIS Spline Wrench Insert - older ISIS bottom brackets or the Race Face Cinch direct mount chainring system.
Steel hex wrench inserts were designed to pair with the Pack Wrench - Ultralight 1 Inch Hex and Bottom Bracket Wrench.
- The aluminum wrench (sold separately) has magnets that hold the inserts in place
- Made in the USA and CNC machined from hardened steel with electroless nickel plating
- Inserts each sold separately
We travel a lot with our bikes and are always looking for the leanest way to have everything we need to build or service a bike without packing 50 lbs of tools. To help with this we developed some very specific Pack Tools that are high quality but weight conscious for those that do mobile wrenching, travel with their bike, or just want one set of tools that can be thrown in when heading to the trail. While the Pack Wrench is lightweight, we wouldn't necessarily call the inserts lightweight. We made the inserts out of steel for extra strength and durability.$39.14 (RRP)$48.41 (RRP)$48.41 (RRP)$225.57 (RRP)$39.14 (RRP)$39.14 (RRP)$100.00 (RRP) -
Stock Code:WMTL-GXP22-EXTStock Code:WMTL-BE-22MM-SETStock Code:WMTL-BE-24MM-SETStock Code:WMTL-24X37-EXTStock Code:WMTL-BE-25MM-SETStock Code:WMTL-29MM-EXTStock Code:WMTL-BE-29MM-SETStock Code:WMTL-BE-30MM-SETStock Code:WMTL-608-EXTStock Code:WMTL-609-EXTStock Code:WMTL-6000-EXTStock Code:WMTL-6001-EXTStock Code:WMTL-6002-EXTStock Code:WMTL-6003-EXTStock Code:WMTL-6804-EXTStock Code:WMTL-6805-EXTStock Code:WMTL-6806-EXTStock Code:WMTL-EX0001Stock Code:WMTL-EX0002Stock Code:WMTL-EX0003Stock Code:WMTL-BE-PUSHERStock Code:WMTL-PUSHERStock Code:WMTL-R6-EXT
6000, 6200, 6800 & 6900 (10mm) Sealed Bearing Extractor
Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings
6000: Bearing ID: 10mm / OD: 26mm / Width: 8mm
6200: Bearing ID: 10mm / OD: 30mm / Width: 9mm
6800: Bearing ID: 10mm / OD: 19mm / Width: 5mm
6900: Bearing ID: 10mm / OD: 22mm / Width: 6mm
Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing
Tap the extractor out with a punchExpected Date:27 November 2025$49.00 (RRP)$65.00 (RRP)$65.00 (RRP)$75.00 (RRP)$65.00 (RRP)$80.00 (RRP)$65.00 (RRP)$65.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$72.00 (RRP)$74.00 (RRP)$74.00 (RRP)$74.00 (RRP)$239.00 (RRP)$226.00 (RRP)$239.00 (RRP)$26.00 (RRP)$19.00 (RRP)$75.00 (RRP) -
Stock Code:CKTL-THB002Stock Code:CKTL-THB020Stock Code:CKTL-THB006Stock Code:CKTL-THB100Stock Code:CKTL-THB007$50.00 (RRP)$46.13 (RRP)$32.50 (RRP)$370.00 (RRP)$54.50 (RRP)
-
Stock Code:WMTL-LR-SKT-02
Designed specifically for the unique profile of Shimano’s 9T lockring, this delivers the accuracy and security needed for proper installation without slips or damaged parts.
Built from heavy-duty 6061 aluminum and engineered to hold up to repeated use, this socket is a shop staple that delivers consistency ride after ride. When precision matters, this is the tool to reach for.
Product Highlights:
- Custom fit for Shimano XTR 12-speed 9T lockrings
- Prevents rounding or damage by locking in cleanly and securely
- Made from durable steel for professional longevity
- A must-have addition to any mechanic’s toolkit
- Works with a 3/8" drive for easy use with common shop tools
- Use with a standard box-end wrench for leverage (not included)Expected Date:27 November 2025$81.00 (RRP)
