Pedros Shop Apron
Description
Heavy-duty 10 oz. canvas sewn in the USA. 33” long by 24” wide for maximum coverage. Release buckle at the neck and waist for easy adjustment and quick on and off. Features a large pocket and two tool slots on the chest plus five large pockets and seven tool slots on the waist.
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-E-BIKESOCKET05Stock Code:WMTL-E-BIKESOCKET03Stock Code:WMTL-E-BIKESOCKET02Stock Code:WMTL-E-BIKESOCKET06Stock Code:WMTL-E-BIKESOCKET01Stock Code:WMTL-E-BIKESOCKET04Stock Code:WMTL-E-BIKESOCKET10Stock Code:WMTL-E-BIKESOCKET09Stock Code:WMTL-E-BIKESOCKET07Stock Code:WMTL-E-BIKESOCKET11Stock Code:WMTL-E-BIKESOCKET08
Compatible with 60mm Gen 1 Bosch Lockring.
Designed to save the mechanic time and money, our new e-bike lockring sockets are machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. • Precision machined aluminum body • Anodized in Wheels MFG red.Expected Date:02 November 2026$72.00 (RRP)$81.00 (RRP)$81.00 (RRP)$81.00 (RRP)$96.00 (RRP)$100.00 (RRP)$81.00 (RRP)$52.00 (RRP)$72.00 (RRP)$81.00 (RRP)$72.00 (RRP) -
Stock Code:PDTL6463020
The Crowfoot Pedal Wrench converts any 3/8" drive torque wrench into a pedal wrench to allow accurate installation torque for pedals with 15mm wrench flats. A perfect add-on for our Grande Torque Wrench.
Use with any 3/8" drive torque wrench to accurately torque pedals with 15mm wrench flats.
Precision laser cut and heat treated tool steel for strength and lasting performance.$24.00 (RRP)Add To Cart
-
Stock Code:ABTLABT-SHCRANK
The Shimano Crank Tool (SCT for short) is specifically built to service the chainring lockring on Shimano single ring cranksets for 12 speed drivetrains. It features a large hex that can be used with a 1.5" or 38mm wrench or locked into a vise.
The clearance hole is kept to a minimum to keep the tool engaged on the low profile lockring, minimizing the chance of damaging the tool or parts.
Compatibility:
Chain ring lockrings on Shimano 12spd mountain crank sets.
XT and Ultegra bottom brackets
Made in Bend Oregon$76.00 (RRP)Add To Cart
-
Stock Code:RLTL-NMAKIT
A 3 Pack of 10/13/14 Gauge fully plastic applicators.
Produces bead of material when dispensed, size dependent on gauge.
Full plastic construction prevents scratching of delicate surfaces.
For use on bearings, freehub bodies, shifters, and lubricating small mechanisms.
Luer-Lock Compatible
Crushproof Polypropylene Connector
14 gauge Opening for Precise Control
Guaranteed For Life!$12.00 (RRP) -
Stock Code:ABTL-SHP-SHPCHNWHP
What good is a Shop Crombie tool without the matching whip?
There's a little more that went into the Shop Duty Whip-It than the matching Crombie. We stuck with the proven construction of a machined tang welded into a handle. We did add some length to the handle, as much as we could while still fitting inside a 700c/29'er wheel and of course it got the matching grip. We also worked with KMC to get some more robust chain from their E bike chain. These chains have a 28% stronger pin design that helps them stay together when your wrist rolls under heavy torque. We also widened the tang everywhere the chain doesn't attached to add stiffness and give the chain more support. Then we heat treat everything to get the most out of the steel.
The other little tweak we did involves magnets. Now we don't pretend to understand how magnets work but they're kind of handy for keeping the chain wrapped around the cassette and keeping the chain stowed when not in use. We're also offering these as parts for the existing Whip-It.
Made in Bend Oregon.$125.00 (RRP)Add To Cart
