EVT Inflator Urethane Washer
Description
The Urethane Pump Washer is a cast urethane washer designed for long-life with leak-free performance. This is the correct replacement for all of our Inflators, Bleedin Gauges, and also fits in Silca's 24.0 Presta Head and Presta part of 30.0 valve!
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-1526OBStock Code:WMTL-1728OBStock Code:WMTL-2437OBStock Code:WMTL-27537OBStock Code:WMTL-6000OBStock Code:WMTL-6001OBStock Code:WMTL-6002OBStock Code:WMTL-6003OBStock Code:WMTL-6801OB-1Stock Code:WMTL-6802OB-1Stock Code:WMTL-6803OB-1Stock Code:WMTL-6804OBStock Code:WMTL-6805OBStock Code:WMTL-6806OBStock Code:WMTL-6900OB-1Stock Code:WMTL-6901OB-1Stock Code:WMTL-6901OB-2Stock Code:WMTL-6902OBStock Code:WMTL-6903OBStock Code:WMTL-6904OBStock Code:WMTL-GXP-LEFT
Open Bore adapters, also known as drifts, are used to press cartridge bearings in to bottom bracket cups, hub shells, freehub bodies and suspension frame pivots. Each adapter has a smaller diameter that inserts in to the center of a bearing, and a larger diameter section that matches the outside diameter of the bearing. When used with a bearing press, the adapter presses against the races of the bearing, properly aligns the bearing and prevents damage as the bearing is pressed in.
Our 1526 open bore adapter is used to press 26x15 sealed bearings. The adapter is machined with one step at 15mm OD, which fits in to the center of the sealed bearing.
Installs: 15267, 15268 bearings
Inner Step Outer Diameter: 14.8mm
Outer Diameter: 25.8mm
Thru Hole Diameter: 0.387" (9.8mm)
Inner hole sized to fit 3/8" ACME threaded rod
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (2 drifts required for some installations)Expected Date:15 December 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$21.00 (RRP) -
Stock Code:EVTL-EVTHOLST
Use the Inflator Holster to hang your EVT inflators, pressure gauges, and your cutting tools properly. This holster improves shop ergonomics and can help reduce the chance of accidental damage.
We cut these to the ideal shape, etch in the EVT logo, and tumble them for a smooth edges and a satin finish.$35.00 (RRP)Add To Cart
-
Stock Code:EVTL-EVTPRESTA
The Presta-Only Inflator is built with characteristic EVT durability and ease-of-use.
It features a bead-popping high-flow presta chuck and a high-quality American-made lever mechanism.
This inflator features our custom super-low-durometer urethane pump washer, which provides a great seal and lasts much longer than rubber.$215.00 (RRP)Add To Cart
-
Stock Code:PDTL6460601
Pedro's Large Sizes Hex Bit Set is designed to work with Pedro's torque wrenches offering ideal and economical coverage of less common large hex wrench sizes.
Set includes:
Hex: 10, 11,12, and 15mm (65mm Length Bit)
Hex: 14 and 16mm (21mm Length Bit)$75.00 (RRP)Add To Cart
-
Stock Code:SWTL-DTDG
Removing the rear wheel usually turns the drivetrain into a mess. The chain goes slack, rubs the frame, drops everywhere, and makes cleaning or storage annoying. The Drivetrain Dummy replaces your rear wheel axle so the chain stays tensioned and the derailleur stays aligned. The bike behaves like there is still a wheel installed, just without the wheel.
Designed for 12 mm rear thru-axles the current standard on modern MTB frames. Slide it in where the wheel axle sits, snug it down, and the drivetrain is ready to use. Removal is just as fast.$29.50 (RRP)Add To Cart
