Radlabs Loobtoob Pro 10ml + Brush-it SM
Description
This Is Kit Includes:
1. LTP10 - Loobtoob Pro 10ml Syringe
1. BS514- Small Brush-it Applicator
1. Radar Laboratories Sticker
1. RADLABS Holographic Sticker
1. Set of Replacement Syringe Seals
LTP10 - Loobtoob Pro 10ml Syringe
Crushproof fully featured Pro syringe with a 10ml capacity.
Can contain and dispense almost any semi-solid material.
Luer-Lock fitting accepts any attachment.
Luer-Lock Compatible
Crushproof Premium Construction
Stainless Connection Fitting with O-Ring
Replaceable O-Ring Sealing Plunger
Ergonomic Dispensing Handle
0.50ml Graduation Marks
Brass Plunger Rod with Dosing / Locking Nut
Includes Loobtoob Label (not applied)
Includes Replacement O-Rings
Guaranteed for life!
BS514- Small Brush-it Applicator
Nylon brush applicator with a small 5x2mm tip, for the most precise projects.
Material dispenses into the brush for clean, convenient one handed application.
For use on freehub bodies, small fasteners, and small mechanisms.
Luer-Lock Compatible
Seamless Stainless Steel
Durable Nylon Bristles
Crushproof Polypropylene Connector
14 gauge Opening for Precise Control
Guaranteed for life!
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMTL-6000OA-6Stock Code:WMTL-6001OA-7Stock Code:WMTL-6002OA-7Stock Code:WMTL-6003OA-7Stock Code:WMTL-6802OA-20Stock Code:WMTL-6803OA-20Stock Code:WMTL-6804OA-20Stock Code:WMTL-6900OA-40Stock Code:WMTL-6901OA-2Stock Code:WMTL-6901OA-40Stock Code:WMTL-6902OA-7Stock Code:WMTL-6903OA-7Stock Code:WMTL-6904OA-7
Our 6000 over axle adapter is used to press 6000 sealed bearings into hub shells or suspension components. An over axle adapter is necessary when the bearing slides over the axle before it is pressed into the hub shell or suspension component. In addition to the adapter, you often need spacers to clear the end of the axle and allow enough clearance for the press to fully push in the bearing.
Installs: 6000 bearing
Outer Diameter: 25.8mm
Thickness: 6mm
Thru Hole Diameter: 10.2mm
Compatible with PRESS-1 or PRESS-4 handles
Machined, red anodized aluminum
Sold individually (multiple adapters required for some installations)Expected Date:03 July 2026Expected Date:03 July 2026Expected Date:03 July 2026$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$20.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP)$18.00 (RRP) -
Stock Code:WMTL-BP0004
This drift and over axle set is used to install less common-sized thru-axle and frame sealed bearings.
Compatible with the 3/8 Wheels Mfg. BP0001, BP0005, Press 1 handles and rod.
Originally Driftset-Hub1
Contains the following Open Bore Drift sizes:
(2) 6000 Open Bore
(2) 6001 Open Bore
(2) 6002 Open Bore
(2) 6003 Open Bore
(2) 6801 Open Bore
(2) 6805 Open Bore
(2) 6900 Open Bore
(2) 6904 Open Bore
(2) 17x28 Open Bore
Contains the following Over Axle Drift sizes:
(2) 6000 Over Axle
(2) 6001 Over Axle,
(2) 6002 Over Axle,
(2) 6003 Over Axle
(2) 6900 Over Axle,
Contains the following speed spacers:
(2) Frame Linkage Standoff 20
(2) Frame Linkage Standoff 30
(2) Speed Spacer 30mm
(1) Speed Spacer 15x25
(1) Speed Spacer 15x35
(1) Speed Spacer 17x25
(1) Speed Spacer 17x35
(1) Speed Spacer 20x25
(1) Speed Spacer 20x35$295.00 (RRP)Add To Cart
-
Stock Code:PDTL6462114
Precision laser cut design with ergonomic cushioned TPR grip and 3/8" drive for use with torque wrenches.
Superior material and optimized heat treatment outlast the competition.$33.00 (RRP)Add To Cart
-
Stock Code:PDTL6450515G
Head rebuild kit for current Super Prestige floor pump.
Includes cap and gasket.$6.00 (RRP)Add To Cart
-
Stock Code:ABTL-TCSOCKET30MM
Suspension service is a specialty within bicycle repair and it takes specialized tools to perform this work. One of the things that any factory tech will tell you is nice to have are sockets specifically made or altered for the low profile hex on the top of each fork leg. The lead in or chamfer on a standard socket will greatly decrease the contact between tool and part and can easily scratch or deform those nuts. For years shops have been grinding down their sockets to remove the chamfer. Problem is you're still often left with a loose fitting socket that is still prone to chewing up those delicate parts. That's why we started from scratch.
We made our sockets from billet aluminum to exacting tolerances to keep these parts in good shape. fully CNC'd machined with zero lead in, they make the specialty that is suspension service a little bit easier. They feature a 3/8" square drive for use with your favorite torque wrench as well as finger splines to help run the top caps into the fork legs with those oil soaked hands. We also kept them short (1" or 25mm for all sizes) to reduce the chance of them caming off of the top cap under torque.
Offered in a 7 individual sizes and a 6 socket set for most modern suspension forks on the market.$53.00 (RRP)Add To Cart
