Wheel Hubs

A thoroughly modern take on the traditional internal cam Quick-Release skewer.

The stainless steel shaft screws into the 7075 aluminum head, which is oval, putting the material where it’s needed and not where it isn’t. The handles are a stainless steel/aluminum affair for a good balance of ergonomics and weight savings.

The nuts have a nice matching O-ring and a thread friction element to keep them in place after the wheels are removed.

Order the skewer length that matches your hub’s width.

Wheels MFG Axle-01 Rear Quick Release 137x10x1mm Shimano Compatible
• Fits many Shimano / Japanese rear hubs
• Thread Pitch: 10mm x 1
• Length: 137mm
• Hollow Axle
• 1 axle per bag
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.

Wheels MFG Cone R002 10x1 Shimano Rear Left 1per
Fits:
•Shimano Ultegra FH-6401 7-speed Rear
•Shimano Ultegra FH-6402 8-speed Rear
•Shimano 105 SC FH-1055 8-speed Rear
•Shimano 105 SC FH-1056 7-speed Rear
•Shimano XT-II M732 7-speed Rear
•Rear Left Cone
•Compatible with Shimano Rear 10 mm x 1 axle
•1 cone per bag

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
 
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
 
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Product features:

- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles

Tech Specs:

- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm 
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA

Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
 
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
 
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.

Product features:

- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles

Tech Specs:

- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm 
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA

Looking for a front axle that is easy to use, lightweight and looks great? Wolf Axle is the perfect fit. Available in a variety of colors and standard or Boost spacing. Easily installed with a 6 mm hex key.

Unlike other similar products, Wolf Axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles.

Always apply a small amount of grease to the washer and threads when installing.


Compatibility

- Fox suspension forks
- 100 mm (standard) or 110 mm (Boost) with the below exceptions
- Not compatible with 2021 Fox F36 and F38 forks
- Similar to Fox Kabolt axle but with more color choices and beautiful Wolf Tooth design.

The Wolf Tooth Rear Axle does more than secure wheels
When developing the Rear Axle, Wolf Tooth engineers knew that they wouldn’t be able to get away with any old factory replacement part, even if it was made in Minnesota to aerospace standards. The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface, and prevents the axle from sticking or galling when you want to remove it.
These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing.
Check out the Axle Caps for added protection and the Trainer Caps for those days on the trainer.