Wheel Hubs
-
Stock Code:PCWA-190BKORStock Code:PCWA-190BLACKStock Code:PCWA-190POLISHStock Code:PCWA-190PUBKStock Code:PCWA-190SILVERStock Code:PCWA-190SIORStock Code:PCWA-191BKORStock Code:PCWA-191BLACKStock Code:PCWA-191POLISHStock Code:PCWA-191PUBKStock Code:PCWA-191SILVERStock Code:PCWA-191SIORStock Code:PCWA-199BKORStock Code:PCWA-199BLACKStock Code:PCWA-199POLISHStock Code:PCWA-199PUBKStock Code:PCWA-199SILVERStock Code:PCWA-199SIOR
A thoroughly modern take on the traditional internal cam Quick-Release skewer.
The stainless steel shaft screws into the 7075 aluminum head, which is oval, putting the material where it’s needed and not where it isn’t. The handles are a stainless steel/aluminum affair for a good balance of ergonomics and weight savings.
The nuts have a nice matching O-ring and a thread friction element to keep them in place after the wheels are removed.
Order the skewer length that matches your hub’s width.$234.00 (RRP)$234.00 (RRP)$310.00 (RRP)$234.00 (RRP)$234.00 (RRP)$234.00 (RRP)$234.00 (RRP)$234.00 (RRP)$310.00 (RRP)$234.00 (RRP)$234.00 (RRP)$234.00 (RRP)$467.00 (RRP)$467.00 (RRP)$619.00 (RRP)$467.00 (RRP)$467.00 (RRP)$467.00 (RRP) -
Stock Code:SAFK-FK0357
15mm x 125mm 1.5 Thread Pitch 12mm Thread Length
The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button head design, for a flush, clean look. Lightweight, easy to use, and secure.
- CNC-machined from 7000 series aluminum
- Designed to fit all current Salsa thru-axle frames
- For other frames, check with the manufacturer for compatibility and other specifications
- 6mm hex wrench required for installation$75.00 (RRP)POA -
Stock Code:SAFK-FK0358
15mm x 135mm 1.5 Thread Pitch 12mm Thread Length
The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button head design, for a flush, clean look. Lightweight, easy to use, and secure.
- CNC-machined from 7000 series aluminum
- Designed to fit all current Salsa thru-axle frames
- For other frames, check with the manufacturer for compatibility and other specifications
- 6mm hex wrench required for installation$75.00 (RRP)POA -
Stock Code:SLWA-HU0000POA
-
Stock Code:SLWA-FK0352
Low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames.
Fits: Midnight Special
Thread Pitch: M6x1.0
Overall Length (mm): 112
Axle Diameter (mm): 12
Thread Length (mm): 25POA -
Stock Code:SLWA-FS1176
Low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames.
Fits: Karate Monkey, Krampus, Troll, Ogre, ECR
Axle Diameter (mm): 12
Overall Length (mm): 160
Thread Length (mm): 25
Thread Pitch: M6x1POA -
Stock Code:SLWA-FK0354
Low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames.
Fits: Karate Monkey, KrampusPOA -
Stock Code:SLWA-FS0270
The Surly DUH system single-speed rear axle helps transform your geared bike into a single-speeding machine. You will also need a Surly DUH single-speed chip and hardware (FS0268 - sold separately) to complete the setup.
Note: The Surly DUH single-speed thru-axle only works with the DUH single-speed chip and hardware.$32.00 (RRP)POA -
Stock Code:WMWA-AN-901
High-grade nuts for most solid-axle equipped bikes.
9mm x 1mm Thread
Sold Separately$4.00 (RRP)Add To Cart
-
Stock Code:WMWA-AN-101-AN$4.00 (RRP)
Add To Cart
-
Stock Code:WMWA-AXLE-01Stock Code:WMWA-AXLE-08Stock Code:WMWA-AXLE-09Stock Code:WMWA-AXLE-14Stock Code:WMWA-AXLE-18
Wheels MFG Axle-01 Rear Quick Release 137x10x1mm Shimano Compatible
• Fits many Shimano / Japanese rear hubs
• Thread Pitch: 10mm x 1
• Length: 137mm
• Hollow Axle
• 1 axle per bag
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.$75.00 (RRP)$83.00 (RRP)$83.00 (RRP)$82.00 (RRP)$82.00 (RRP) -
Stock Code:WMWA-CN-R002Stock Code:WMWA-CN-R024Stock Code:WMWA-CN-R036Stock Code:WMWA-CN-R040Stock Code:WMWA-CN-R055Stock Code:WMWA-CN-R060Stock Code:WMWA-CN-R063Stock Code:WMWA-CN-R081Stock Code:WMWA-CN-R082Stock Code:WMWA-CN-R083Stock Code:WMWA-CN-R084Stock Code:WMWA-CN-R085Stock Code:WMWA-CN-R086Stock Code:WMWA-CN-R088Stock Code:WMWA-CN-R089Stock Code:WMWA-CN-R096Stock Code:WMWA-CN-R097Stock Code:WMWA-CN-R098Stock Code:WMWA-CN-R099Stock Code:WMWA-CN-R102Stock Code:WMWA-CN-R108
Wheels MFG Cone R002 10x1 Shimano Rear Left 1per
Fits:
•Shimano Ultegra FH-6401 7-speed Rear
•Shimano Ultegra FH-6402 8-speed Rear
•Shimano 105 SC FH-1055 8-speed Rear
•Shimano 105 SC FH-1056 7-speed Rear
•Shimano XT-II M732 7-speed Rear
•Rear Left Cone
•Compatible with Shimano Rear 10 mm x 1 axle
•1 cone per bag$27.00 (RRP)$27.00 (RRP)$29.00 (RRP)$29.00 (RRP)$31.00 (RRP)$27.00 (RRP)$29.00 (RRP)$27.00 (RRP)$29.00 (RRP)$29.00 (RRP)$29.00 (RRP)$27.00 (RRP)$29.00 (RRP)$29.00 (RRP)$29.00 (RRP)$29.00 (RRP)$29.00 (RRP)$27.00 (RRP)$31.00 (RRP)$29.00 (RRP)$27.00 (RRP) -
Stock Code:WMWA-FTA-12-118-1.5Stock Code:WMWA-FTA-12-120-1.5Stock Code:WMWA-FTA-12-125-1.5Stock Code:WMWA-FTA-12-128-1.5Stock Code:WMWA-FTA-12-133-1.5Stock Code:WMWA-FTA-15-125-1.5Stock Code:WMWA-FTA-15-141-1.5Stock Code:WMWA-FTA-15-145-1.5Stock Code:WMWA-FTA-15-148-1.5Stock Code:WMWA-FTA-15-155-1.5Stock Code:WMWA-FTA-15-158-1.5Stock Code:WMWA-FTA-15-189-1.5Stock Code:WMWA-FTA-15-198-1.5Stock Code:WMWA-FTA1-15-135-1.5
Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.
Product features:
- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles
Tech Specs:
- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$999.00 (RRP) -
Stock Code:WMWA-RTA-12-154-1.0Stock Code:WMWA-RTA-12-160-1.0Stock Code:WMWA-RTA-12-162-1.0Stock Code:WMWA-RTA-12-166-1.0Stock Code:WMWA-RTA-12-168-1.0Stock Code:WMWA-RTA-12-172-1.0Stock Code:WMWA-RTA-12-174-1.0Stock Code:WMWA-RTA-12-175-1.0Stock Code:WMWA-RTA-12-180-1.0Stock Code:WMWA-RTA-12-185-1.0Stock Code:WMWA-RTA-12-194-1.0Stock Code:WMWA-RTA-12-218-1.0Stock Code:WMWA-RTA-12-164-1.5Stock Code:WMWA-RTA-12-172-1.5Stock Code:WMWA-RTA-12-229-1.5Stock Code:WMWA-RTA-12-165-1.75Stock Code:WMWA-RTA-12-172-1.75Stock Code:WMWA-RTA-12-176-1.75Stock Code:WMWA-RTA-12-180-1.75
Designed and tested in the rugged conditions of Colorado, these new thru-axles will meet the demands of every rider. Machined from aircraft quality 7075 aluminum to be stiff, durable and long lasting. The low-profile design reduces weight, minimizes snag points, and provides a clean sleek look.
There is nothing worse than damaging your bike or components. Wheels Manufacturing designed a unique captive rotating thru-axle washer that reduces friction on dropouts during installation. This washer allows for a precise fit and prevents damage when torquing.
Whether you are looking to upgrade or replace an existing factory axle, the Wheels Mfg thru-axles will fit a wide variety of bike and fork models.
Product features:
- Designed, machined and tested in Colorado, USA.
- 5mm hex on both ends of the axle for easy installation and removal.
- Hard anodized finish for extra durability.
- Captive rotating axle washer reduces friction on bikes frames and forks during installation, preventing potential damage.
- Axle length is compatible +/- 2mm
- Replacement for OEM thru-axles
Tech Specs:
- Material: 7075 aluminum
- Hard anodized
- Diameter: 12mm
- Torque Spec: 12 Nm max
- Tool Interface: 5mm hex key
- Made in the USA$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP)$71.00 (RRP) -
Stock Code:WMWA-AX-KITS
Includes all the popular axle sizes for Shimano axle repairs and replacements:
•3 - Axle-01: Hollow, 10mm x 1, 137mm length
•3 - Axle-03: Hollow, 10mm x 1, 141mm length
•4 - Axle-04: Hollow, 10mm x 1, 146mm length
•3 - Axle-06: Solid, 10mm x 1mm, 174mm length
•2 - Axle-14: Solid, 9.0mm x 1mm, 155mm length
•2 - Axle-17: Hollow, 9.0mm x 1mm, 110mm length$340.00 (RRP)Add To Cart
-
Stock Code:WMWA-AX-KITT
Includes the following popular axle sizes for Taiwanese and BMX axle repairs and replacements:
•3 - AXLE-10: Hollow, 9.5mm (3/8") x 26 tpi, 137mm length
•3 - AXLE-11: Hollow, 9.5mm (3/8") x 26 tpi, 141mm length
•3 - AXLE-12: Hollow, 9.5mm (3/8") x 26 tpi, 146mm length
•3 - AXLE-13: Solid, 9.5mm (3/8") x 26 tpi, 174mm length
•3 - AXLE-14: Solid, 9.5mm (3/8") x 26 tpi, 155mm length$340.00 (RRP)Add To Cart
-
Stock Code:WMWA-AXLE-34
Wheels MFG Axle-34 Rear solid 180x9.5x24mm BMX
• Fits many BMX hubs
• Thread Pitch: 9.5mm (3/8") x 24
• Length: 180mm
• Solid Axle
• 1 axle per bag
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.$82.00 (RRP)
