Components
-
Stock Code:WTHS-IS42U-SPEC-3MM-BLK
Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061-T6 aluminum. They are designed to be lightweight, strong, and durable. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. This has a stack height of 3mm and is available in a variety of colors to match other Wolf Tooth anodized color options. These IS headsets are made exclusively for Specialized frames with molded-in internal bearing cups. Like all Wolf Tooth Premium Headsets with Enduro stainless steel bearings, the Premium IS Headset for Specialized has a lifetime warranty.
Compatibility
- Any Specialized bike that uses an IS (Integrated Standard) headset with 42mm upper bearing diameter.
- Uppers and lowers sold separately.
- Enduro stainless steel sealed bearings included on both the upper and lower.
- Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately). (Never use a star nut on a carbon steerer tube).
- Some bikes, like the Stumpjumper EVO, have an adjustable headset that resembles a ZS headset where an upper cup is pressed into the frame. Our bearing will fit into that cup and our top cap will fit neatly on top.
Known Compatible Specialized Bike Models:
Aluminum Mountain Bikes (except pre-2017 Chisel HT aluminum)
Camber Carbon | 2014
Chisel Alloy HT (Smartweld HT) | 2017-2021
Enduro 29 Carbon | 2014
Enduro Carbon | 2017, 2020
Epic Carbon | 2014
Epic FSR | 2021
Epic FSR Carbon | 2018
Epic HT | 2017, 2020
Fatboy Carbon | 2015
Fuse Carbon | 2017
Stumpjumper | 2021
Stumpjumper Carbon | 2019
Stumpjumper EVO | 2021
Stumpjumper FSR Carbon | 2016
Turbo Levo
$130.00 (RRP)Add To Cart
-
Stock Code:WTCTLONEWOLF-BRAZE-LStock Code:WTCTLONEWOLF-BRAZE-MStock Code:WTCTLONEWOLF-BRAZE-H
LOW SWEEP for 34-52T chainrings.
The new LoneWolf Aero Chainguide prevents dropped chains on road, gravel, and CX bikes with 1x drivetrains. This chainguide has been tested and developed with Team Jumbo-Visma, has been trusted in road cycling’s biggest races, and ridden to victory in the 2023 Giro d'Italia. LoneWolf Aero Chainguide was also ridden to victory through truly epic conditions at Unbound Gravel 2023.
We think of this little chainguide as 30g of insurance for races where a dropped chain could cost you a shot at the podium. The LoneWolf Aero Chainguide is similar to our existing GnarWolf, and combines a low profile head that only covers the top and inboard side of the chain with our GuideLock quick adjustment system. This eliminates the need for shims and gives you security in a light, easy to use, and aerodynamically optimized chainguide solution.
• Compatible with bikes that have a braze-on front derailleur mount
• Only for use with 1x drivetrains
• Works with round or oval chainrings
• Three base sweep options for chainring sizes ranging from roughly 38T-62T based on frame; Low sweep for smaller chainrings in that range will be most popular
• Head has 8mm of adjustment for chainline via our GuideLock quick adjustment system$90.00 (RRP)$90.00 (RRP)$90.00 (RRP) -
Stock Code:WTCTLONEWOLF-CV-PROStock Code:WTCTLONEWOLF-CV-LOWStock Code:WTCTLONEWOLF-CV-MID
The Wolf Tooth LoneWolf Aero Chainguide for Cervelo prevents dropped chains on select Cervelo models when equipped with a 1x drivetrain. This product has been tested and developed alongside Team Jumbo-Visma, who have been racing with this in some of road cycling’s biggest races, winning the Maglia Rosa in the 2023 Giro d'Italia.
Compatibility
• Chainring Compatibility - Mid Sweep 48-52T round chainrings
• Compatible with Cervelo S5 and P5 bikes that have a braze-on front derailleur mount
• Mounts directly to the frame in place of the braze-on
• Only for use with 1x drivetrains
• Head has 8mm of adjustment for chainline via our GuideLock quick adjustment system
Note: Braze-on mount is not at the same height on all bikes so max chainring size will vary somewhat depending on frame brand and model$150.00 (RRP)$150.00 (RRP)$150.00 (RRP) -
Stock Code:WTCHOVAL-10432-SH12Stock Code:WTCHOVAL-10434-SH12
The new Shimano XTR, XT, and SLX 12spd Hyperglide+ chain works differently than other products on the market so Wolf Tooth engineers developed a completely new tooth profile to provide optimal chain retention and durability when using this new chain technology.
- The new HG+ chain interacts with the chainring much differently than a traditional wide/narrow design. Wolf Tooth engineers spent the time to understand how the system works and design a new tooth profile that is optimized for this system.
- Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with legendary Wolf Tooth chain retention.
- Prevents premature ring and chain wear that can come from non-optimized profiles.
Compatibility
- These rings fit any 104 BCD crankset
- Threaded to use M8 chainring bolts (no nuts required)
- Ovality of 10% and timing of 112° after TDC (top dead center)
- Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)$154.50 (RRP)$154.50 (RRP) -
Stock Code:WTCHOVAL10432-BStock Code:WTCHOVAL10434-BStock Code:WTCHOVAL10436-B
These rings fit any 104 BCD crankset
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle, SRAM Flattop chains)
Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
Quarq power meter compatible with sizes 34t and 36t. Filing required for 32t fitment onto some older Quarq Power meters. No modifications are required for the DUB Quarq Power meter.
- Chainline (approximate as BB centering and cranksets vary) - 48mm on 3x cranksets and 49mm on 2x
- Threaded to use M8 chainring bolts (no nuts required)
- Ovality of 10% and timing of 112° after TDC (top dead center)
- Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)$139.05 (RRP)Was:$139.05 (RRP)Now:$82.50 (RRP)Price:$82.50 (RRP)$139.05 (RRP) -
Stock Code:WTCHOVAL-11038-FTStock Code:WTCHOVAL-11040-FTStock Code:WTCHOVAL-11042-FT
10, 11, & 12spd Eagle and Flattop - These chainrings are designed to work with all 10 speed, and 11 speed chains. They also work with 12 speed SRAM Flattop, SRAM Eagle and KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain.
More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth’s PowerTrac Elliptical™ (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112°) than competitors’ versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings.
It’s like having two chainrings in one! With PowerTrac Elliptical rings, the larger-diameter section of the ring engages with the chain at the optimal point on the downstroke, or “Power Zone,” – between 1-5 and 7-11 on a clock face – to take advantage of your body’s natural biomechanical POWER: For example, during this section, a PTE 34t ring is equivalent to a 36t round ring. Similarly in the “Recovery Zone” (11-1 and 5-7), the smaller section on the PTE ring engages, maximizing EFFICIENCY in the weakest part of the pedal stroke; here the PTE 34t ring is equivalent to a 32t round ring.
Additionally, the above provides a smoother, more efficient pedal rotation, which means better TRACTION. Steadier torque on the rear wheel means less spinning out in the “Power Zone,” while pedaling is easier during the “Recovery Zone,” so you maintain momentum.
Compatibility
These rings are for use with 110 BCD 5 arm cranksets.
Crank arm clocking arrow will be rotated 180 degrees from normal on cranksets that have 4 bolts visible and 1 hidden bolt behind the crank arm like for SRAM.
Do NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800
Not compatible with Campy CX10/11.
Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability$170.00 (RRP)$170.00 (RRP)$170.00 (RRP) -
Stock Code:WTCHOVAL-SH11040Stock Code:WTCHOVAL-SH11042Stock Code:WTCHOVAL-SH11044
- These rings are for use with Shimano 110 BCD Asymmetric 4-bolt cranks.
- Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700
- Sizes 40T and larger are compatible with Dura Ace 9100, Ultegra 8000, and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 38T chainring will not work for this modification. Click here to review the process for the modification, which takes about 5 minutes to perform.
- Mounts in the big ring position of the cranks but is offset inward for perfect chainline.
- The stock 2x bolts will not work. You will need our 6mm bolts which are optimized for single ring mounting.
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains.
If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Chainline - 47.5mm$158.62 (RRP)$158.62 (RRP)$167.89 (RRP) -
Stock Code:WTCHOVAL-SH11038-GRStock Code:WTCHOVAL-SH11042-GRStock Code:WTCHOVAL-SH11046-GR
These chainrings are for Shimano GRX cranks. They feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. The newly updated tooth profile works with SRAM Flattop chain in addition to other 9, 10, 11, and 12 spd chains (except Shimano HG+ 12 speed chain).
Compatibility
- Shimano GRX cranksets including RX600 and RX810
- Drop-Stop® FT tooth profile is compatible with SRAM Flattop chain
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile provides the ultimate chain retention and mud shedding ability$182.00 (RRP)$180.00 (RRP)$190.00 (RRP) -
Stock Code:WTCHOVAL6430
- These rings fit any crankset that has a 64 BCD "small ring" position. This includes standard 104 BCD cranksets, the M960 Shimano XTR crankset, the 96 BCD Triple cranksets (e.g. M782) and some others.
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
- Chainline (approximate as BB centering and cranksets vary) - 47mm on a triple and 48mm on a double crankset
- Ovality of 10% and timing of 112° after TDC (top dead center)
- Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)Was:$131.84 (RRP)Now:$108.90 (RRP)Price:$108.90 (RRP) -
Stock Code:WTCHOVAL-M8K-32
- These rings fit on the Shimano XT M8000 and SLX M7000 1x or 2x cranksets.
- Use only the stock Shimano XT M8000 or SLX M7000 chainring bolts
- These CAN be mounted to the XTR 9000 series cranks, but you will have to use the bolt caps that come with that crankset and you will need to file roughly 1mm off the threaded boss on each bolt cap (they are a little too long and don't allow the ring to be tightened down).
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Provide a great chainline on most boost bikes.
- Chainline - 49mm
- Boost Crankset Chainline - 52 mm
- Must use the stock chainring bolts. The Wolf Tooth chainring bolts are a different size.
- Ovality of 10% and timing of 112° after TDC (top dead center)
- Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)
More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth’s PowerTrac Elliptical™ (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112°) than competitors’ versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings.
It’s like having two chainrings in one! With PowerTrac Elliptical rings, the larger-diameter section of the ring engages with the chain at the optimal point on the downstroke, or “Power Zone,” – between 1-5 and 7-11 on a clock face – to take advantage of your body’s natural biomechanical POWER: For example, during this section, a PTE 34t ring is equivalent to a 36t round ring. Similarly in the “Recovery Zone” (11-1 and 5-7), the smaller section on the PTE ring engages, maximizing EFFICIENCY in the weakest part of the pedal stroke; here the PTE 34t ring is equivalent to a 32t round ring.
Additionally, the above provides a smoother, more efficient pedal rotation, which means better TRACTION. Steadier torque on the rear wheel means less spinning out in the “Power Zone,” while pedaling is easier during the “Recovery Zone,” so you maintain momentum.$170.00 (RRP) -
Stock Code:WTCHOVAL-32XTRM9000
These chainrings fit only the Shimano XTR M9000 and M9020 cranksets (race and trail respectively). They have an asymmetrical 96 mm BCD with built-in threaded standoffs to provide the ideal 1X chainline.
- Use only the stock Shimano XTR chainring bolts (M7)
- You will not use the stock bolt caps when mounting this ring. The stock bolts will thread into the chainring's standoffs from the outside of the crankset.
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Provide a great chainline on most boost bikes.
- Chainline - 49mm for 30-34t
More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth’s PowerTrac Elliptical™ (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112°) than competitors’ versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings.
It’s like having two chainrings in one! With PowerTrac Elliptical rings, the larger-diameter section of the ring engages with the chain at the optimal point on the downstroke, or “Power Zone,” – between 1-5 and 7-11 on a clock face – to take advantage of your body’s natural biomechanical POWER: For example, during this section, a PTE 34t ring is equivalent to a 36t round ring. Similarly in the “Recovery Zone” (11-1 and 5-7), the smaller section on the PTE ring engages, maximizing EFFICIENCY in the weakest part of the pedal stroke; here the PTE 34t ring is equivalent to a 32t round ring.
Additionally, the above provides a smoother, more efficient pedal rotation, which means better TRACTION. Steadier torque on the rear wheel means less spinning out in the “Power Zone,” while pedaling is easier during the “Recovery Zone,” so you maintain momentum.$141.11 (RRP) -
Stock Code:WTCHOVAL-RFC30Stock Code:WTCHOVAL-RFC30-BSTStock Code:WTCHOVAL-RFC30-BST-SH12Stock Code:WTCHOVAL-RFC30-BST-BStock Code:WTCHOVAL-RFC32-BSTStock Code:WTCHOVAL-RFC32-BST-SH12Stock Code:WTCHOVAL-RFC32-BST-BStock Code:WTCHOVAL-RFC34-BSTStock Code:WTCHOVAL-RFC34-BST-SH12Stock Code:WTCHOVAL-RFC34-BST-BStock Code:WTCHOVAL-RFC36-BSTStock Code:WTCHOVAL-RFC36-BST-BStock Code:WTCHOVAL-RFC40-BST
Elliptical Direct Mount Chainring for Race Face Cinch Standard / 6mm Offest (142mm)
Compatibility
- Any Race Face Cinch(TM) system crankset (including Next SL, Sixc, Turbine, Aeffect)
- For 142mm rear hub spacing
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.
If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)
- Chainline 49mm (standard), 52mm (Boost)$158.62 (RRP)$158.62 (RRP)$158.62 (RRP)$170.00 (RRP)$158.62 (RRP)$167.89 (RRP)$170.00 (RRP)$170.00 (RRP)$167.89 (RRP)$170.00 (RRP)$154.50 (RRP)$180.00 (RRP)$162.74 (RRP) -
Stock Code:WTCH-OVAL-SDM8-38Stock Code:WTCH-OVAL-SDM8-40Stock Code:WTCH-OVAL-SDM8-42Stock Code:WTCH-OVAL-SDM8-44
More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth’s PowerTrac Elliptical™ (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112°) than competitors’ versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings.
Direct mount chainrings for SRAM cranks with 8-bolt mounting replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet.
Compatibility
- These direct mount chainrings will replace your existing chainring and spider or replace the direct mount chainring for SRAM AXS cranksets and other cranks that use the 8-bolt mounting. Most SRAM cranksets have traditionally used a 3-bolt mounting, but the 8-bolt mounting has always been used on the Quarq power meter cranks. Now some non-power meter cranks like SRAM AXS use the 8-bolt mounting.
- All SRAM Direct Mount DUB road cranksets use the 8-bolt mounting standard. These cranksets use either 107 BCD or 94 BCD; any of those cranksets with a removable spider use the 8-bolt mount.
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability
- 6mm offset
- Chainline 45mm
Use for all 9, 10, and 11spd chains or 12spd SRAM Eagle, SRAM Flattop, Campagnolo, KMC, Connex or Wippermann chains.$180.00 (RRP)$180.00 (RRP)$180.00 (RRP)$190.00 (RRP) -
Stock Code:WTCHOVAL-ERC38-FTStock Code:WTCHOVAL-ERC40-FTStock Code:WTCHOVAL-ERC42-FT
These chainrings are for Easton or Race Face Cinch cranks. Updated tooth profile works with SRAM Flattop chain. The Wolf Tooth Cinch chainrings feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance.
$172.01 (RRP)$172.01 (RRP)$172.01 (RRP) -
Stock Code:WTCH-SHDM-V-S-00F-30
Oval Direct Mount Chainrings for Shimano Cranks for Shimano 12spd Hyperglide+ Chain 0mm Offset
The Shimano XTR, XT, and SLX 12spd Hyperglide+ chain works differently than other products on the market so Wolf Tooth engineers developed a completely new tooth profile to provide optimal chain retention and durability when using this new chain technology.
- The new HG+ chain interacts with the chainring much differently than a traditional wide/narrow design. Wolf Tooth engineers spent the time to understand how the system works and design a new tooth profile that is optimized for this system.
- Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with legendary Wolf Tooth chain retention.
- Prevents premature ring and chain wear that can come from non-optimized profiles.
Compatibility
- Shimano XTR M9100, XT M8100, and SLX M7100 and Deore M6100series 12 speed cranksets.
- Compatible with Shimano 12-speed Hyperglide+ chains$180.00 (RRP) -
Stock Code:WTCH-SHDM-V-S-00F-32Stock Code:WTCH-SHDM-V-S-00F-34
Oval Direct Mount Chainrings for Shimano Cranks for Shimano 12spd Hyperglide+ Chain 0mm Offset
The Shimano XTR, XT, and SLX 12spd Hyperglide+ chain works differently than other products on the market so Wolf Tooth engineers developed a completely new tooth profile to provide optimal chain retention and durability when using this new chain technology.
- The new HG+ chain interacts with the chainring much differently than a traditional wide/narrow design. Wolf Tooth engineers spent the time to understand how the system works and design a new tooth profile that is optimized for this system.
- Engineered proprietary tooth profile maintains the quiet and smooth performance of the HG+ drivetrain with legendary Wolf Tooth chain retention.
- Prevents premature ring and chain wear that can come from non-optimized profiles.
Compatibility
- Shimano XTR M9100, XT M8100, and SLX M7100 and Deore M6100series 12 speed cranksets.
- Compatible with Shimano 12-speed Hyperglide+ chains$180.00 (RRP)$170.00 (RRP) -
Stock Code:WTCH-SDM8-V-S-03P-30Stock Code:WTCH-SDM8-V-S-03P-32Stock Code:WTCH-SDM8-V-S-03P-34
Oval Direct Mount Chainrings for SRAM 8-Bolt Mountain Cranks are optimised for Shimano HG+ chains, it pairs perfectly with all mechanical and wireless Shimano 12-speed drivetrains.
The 3mm offset is for SRAM MTB cranks with DUB WIDE spindles that are already at the 55mm chainline required for SRAM T-Type Transmission groupsets.
Compatibility
- These direct mount chainrings will replace your existing chainring and spider or replace the direct mount chainring for SRAM AXS cranksets and other cranks that use the 8-bolt mounting. Most SRAM cranksets have traditionally used a 3-bolt mounting, but the 8 bolt mounting has always been used on the Quarq power meter cranks. Now some non-power meter cranks like SRAM AXS use the 8-bolt mounting.
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability
- 3mm offset
- Chainline 55mm$170.00 (RRP)$170.00 (RRP)$170.00 (RRP) -
Stock Code:WTCHOVAL-SDM38-FTStock Code:WTCHOVAL-SDM40-FTStock Code:WTCHOVAL-SDM42-FT
Elliptical Direct Mount Chainrings for SRAM Cranks STANDARD / 6mm Offset FLATTOP
10, 11, & 12spd Eagle and Flattop - These chainrings are designed to work with all 10 speed, and 11 speed chains. They also work with 12 speed SRAM Flattop, SRAM Eagle and KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain.
- These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. Note that the SRAM 12spd Red and Force AXS use a different 8 bolt mounting interface that is not compatible with these chainrings.
- Also compatible with Cane Creek eeWing cranksets.
More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth’s PowerTrac Elliptical™ (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112°) than competitors’ versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings.
It’s like having two chainrings in one! With PowerTrac Elliptical rings, the larger-diameter section of the ring engages with the chain at the optimal point on the downstroke, or “Power Zone,” – between 1-5 and 7-11 on a clock face – to take advantage of your body’s natural biomechanical POWER: For example, during this section, a PTE 34t ring is equivalent to a 36t round ring. Similarly in the “Recovery Zone” (11-1 and 5-7), the smaller section on the PTE ring engages, maximizing EFFICIENCY in the weakest part of the pedal stroke; here the PTE 34t ring is equivalent to a 32t round ring.
Additionally, the above provides a smoother, more efficient pedal rotation, which means better TRACTION. Steadier torque on the rear wheel means less spinning out in the “Power Zone,” while pedaling is easier during the “Recovery Zone,” so you maintain momentum.$170.00 (RRP)$180.00 (RRP)$180.00 (RRP) -
Stock Code:WTHSEC34L-30-BLK-BStock Code:WTHSEC34L-30-BLU-BStock Code:WTHSEC34L-30-GLD-BStock Code:WTHSEC34L-30-ORG-BStock Code:WTHSEC34L-30-RED-BStock Code:WTHSEC34L-30-PRU-LStock Code:WTHSEC44L-40-BLK-BStock Code:WTHSEC44L-40-BLU-BStock Code:WTHSEC44L-40-GLD-BStock Code:WTHSEC44L-40-RED-BStock Code:WTHSEC44L-40-PRU-BStock Code:WTHSEC49L-40-BLK-BStock Code:WTHSEC49L-40-GLD-BStock Code:WTHSIS52L-40-BStock Code:WTHSZS56L-40-BLK-BStock Code:WTHSZS56L-40-BLU-BStock Code:WTHSZS56L-40-ORG-BStock Code:WTHSZS56L-40-RED-BStock Code:WTHSZS56L-40-PRU-B
EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets.
Performance Headsets with Enduro black oxide bearings have a one-year warranty.
Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our headsets have three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable.
A crown race adapter (sold separately)will allow you to use forks with smaller 1-1/8" or 1-1/4" steerer tubes with a larger 1-1/2" bottom headset cup$88.00 (RRP)$88.00 (RRP)$88.00 (RRP)$88.00 (RRP)$88.00 (RRP)$88.00 (RRP)$84.00 (RRP)$84.00 (RRP)$84.00 (RRP)$84.00 (RRP)$84.00 (RRP)$80.00 (RRP)$80.00 (RRP)$70.00 (RRP)$84.00 (RRP)$84.00 (RRP)$84.00 (RRP)$84.00 (RRP)$84.00 (RRP) -
Stock Code:WTHSEC34U-5MM-BLK-BStock Code:WTHSEC34U-5MM-BLU-BStock Code:WTHSEC34U-5MM-GLD-BStock Code:WTHSEC34U-5MM-ORG-BStock Code:WTHSEC34U-5MM-RED-BStock Code:WTHSEC34U-5MM-PRU-BStock Code:WTHSIS41U-5MM-BLK-BStock Code:WTHSIS41U-5MM-BLU-BStock Code:WTHSIS41U-5MM-GLD-BStock Code:WTHSIS41U-5MM-ORG-BStock Code:WTHSIS41U-5MM-RED-BStock Code:WTHSIS41U-5MM-PRU-BStock Code:WTHSZS44U-5MM-BLK-BStock Code:WTHSZS44U-5MM-BLU-BStock Code:WTHSZS44U-5MM-GLD-BStock Code:WTHSZS44U-5MM-ORG-BStock Code:WTHSZS44U-5MM-RED-BStock Code:WTHSZS44U-5MM-PRU-B
ZS headsets are for frames with internal bearing cups that are pressed into the frame.
Performance Headsets with Enduro black oxide bearings have a one-year warranty.
Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our headsets have three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable.
Compatibility
- Any frame that uses ZS (Zero Stack) headsets with 44mm upper
- Uppers and lowers sold separately.$108.00 (RRP)$108.00 (RRP)$108.00 (RRP)$108.00 (RRP)$108.00 (RRP)$108.00 (RRP)$90.00 (RRP)$90.00 (RRP)$90.00 (RRP)$90.00 (RRP)$90.00 (RRP)$90.00 (RRP)$103.00 (RRP)$103.00 (RRP)$103.00 (RRP)$103.00 (RRP)$103.00 (RRP)$103.00 (RRP) -
Stock Code:WTHSEC34U-5MM-BLKStock Code:WTHSEC34U-5MM-BLUStock Code:WTHSEC34U-5MM-GLDStock Code:WTHSEC34U-5MM-GRNStock Code:WTHSEC34U-5MM-ORGStock Code:WTHSEC34U-5MM-REDStock Code:WTHSEC34U-5MM-RSILStock Code:WTHSEC34U-5MM-PRUStock Code:WTHSIS41U-5MM-BLKStock Code:WTHSIS41U-5MM-BLUStock Code:WTHSIS41U-5MM-GLDStock Code:WTHSIS41U-5MM-GRNStock Code:WTHSIS41U-5MM-ORGStock Code:WTHSIS41U-5MM-REDStock Code:WTHSIS41U-5MM-SILStock Code:WTHSIS41U-5MM-RSILStock Code:WTHSIS41U-5MM-PRUStock Code:WTHSIS41U-8MM-KNOCK-BLKStock Code:WTHS-IS42U-5MM-BLKStock Code:WTHS-IS42U-5MM-ORGStock Code:WTHS-IS42U-5MM-RSILStock Code:WTHSZS44U-5MM-BLKStock Code:WTHSZS44U-5MM-BLUStock Code:WTHSZS44U-5MM-GLDStock Code:WTHSZS44U-5MM-ORGStock Code:WTHSZS44U-5MM-REDStock Code:WTHSZS44U-5MM-RSILStock Code:WTHSZS44U-5MM-PRU
EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets.
Premium Headsets with Enduro stainless steel bearings have a lifetime warranty.
Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our headsets have three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable.
Compatibility
- Stack height designation for EC headsets includes 10mm cup
- Any frame that uses an external cup headset with a 34mm upper head tube inner diameter and 34mm
- Uppers and lowers sold separately.$147.00 (RRP)$147.00 (RRP)$147.00 (RRP)$147.00 (RRP)$147.00 (RRP)$147.00 (RRP)$147.00 (RRP)$147.00 (RRP)$130.00 (RRP)$130.00 (RRP)$130.00 (RRP)$130.00 (RRP)$130.00 (RRP)$130.00 (RRP)$130.00 (RRP)$130.00 (RRP)$130.00 (RRP)$140.00 (RRP)$130.00 (RRP)$130.00 (RRP)$130.00 (RRP)$140.00 (RRP)$140.00 (RRP)$140.00 (RRP)$140.00 (RRP)$140.00 (RRP)$140.00 (RRP)$140.00 (RRP) -
Stock Code:WTHSEC34L-30-BLKStock Code:WTHSEC34L-30-BLUStock Code:WTHSEC34L-30-GLDStock Code:WTHSEC34L-30-GRNStock Code:WTHSEC34L-30-ORGStock Code:WTHSEC34L-30-REDStock Code:WTHSEC34L-30-SILStock Code:WTHSEC34L-30-RSILStock Code:WTHSEC34L-30-PRUStock Code:WTHSEC44L-40-BLKStock Code:WTHSEC44L-40-BLUStock Code:WTHSEC44L-40-GLDStock Code:WTHSEC44L-40-ORGStock Code:WTHSEC44L-40-REDStock Code:WTHSEC44L-40-SILStock Code:WTHSEC44L-40-RSILStock Code:WTHSEC44L-40-PRUStock Code:WTHSEC49L-40-BLKStock Code:WTHSEC49L-40-BLUStock Code:WTHSEC49L-40-GLDStock Code:WTHSEC49L-40-ORGStock Code:WTHSEC49L-40-REDStock Code:WTHSEC49L-40-BLK-P10Stock Code:WTHSIS52L-40Stock Code:WTHSZS56L-40-BLKStock Code:WTHSZS56L-40-BLUStock Code:WTHSZS56L-40-GLDStock Code:WTHSZS56L-40-GRNStock Code:WTHSZS56L-40-ORGStock Code:WTHSZS56L-40-REDStock Code:WTHSZS56L-40-RSILStock Code:WTHSZS56L-40-PRU
EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets.
Premium Headsets with Enduro stainless steel bearings have a lifetime warranty.
Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our headsets have three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable.
A crown race adapter (sold separately)will allow you to use forks with smaller 1-1/8" or 1-1/4" steerer tubes with a larger 1-1/2" bottom headset cup$128.00 (RRP)$128.00 (RRP)$128.00 (RRP)$128.00 (RRP)$128.00 (RRP)$128.00 (RRP)$128.00 (RRP)$128.00 (RRP)$128.00 (RRP)$122.00 (RRP)$122.00 (RRP)$122.00 (RRP)$122.00 (RRP)$122.00 (RRP)$122.00 (RRP)$122.00 (RRP)$122.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$120.00 (RRP)$90.00 (RRP)$122.00 (RRP)$122.00 (RRP)$122.00 (RRP)$122.00 (RRP)$122.00 (RRP)$122.00 (RRP)$122.00 (RRP)$122.00 (RRP)
