PAUL COMPONENTS
-
Stock Code:PCCK-4175JISPU
These crankarms are CNC machined in-house from ultra-strong 2024 American alloy. This allows Paul to remove a lot of material for an elegant design, while retaining excellent strength and stiffness.
J.I.S. Square Taper means you can really fine-tune the Q-Factor and chainstay clearance of the crankarms via BB spindle length, then you get the chainring nice and close to the chainstay for better chainline in the bigger rear cogs via chainring offset (0, -3, -6). Q-Factor nerds rejoice!
- 3-bolt SRAM Direct-Mount means you can choose from a wide range of chainrings and offset options.
- Crankbolts, extractor caps, and chainring bolts are included. Bottom bracket and chainrings are not.
- Weight 516g (pair of 180mm).$589.00 (RRP) -
Stock Code:PCCK-4175JISSI
These crankarms are CNC machined in-house from ultra-strong 2024 American alloy. This allows Paul to remove a lot of material for an elegant design, while retaining excellent strength and stiffness.
J.I.S. Square Taper means you can really fine-tune the Q-Factor and chainstay clearance of the crankarms via BB spindle length, then you get the chainring nice and close to the chainstay for better chainline in the bigger rear cogs via chainring offset (0, -3, -6). Q-Factor nerds rejoice!
- 3-bolt SRAM Direct-Mount means you can choose from a wide range of chainrings and offset options.
- Crankbolts, extractor caps, and chainring bolts are included. Bottom bracket and chainrings are not.
- Weight 516g (pair of 180mm).$589.00 (RRP) -
Stock Code:PCWH-155BLACK32
The Disc WORD Hub can be selected with one of three different super-stiff, super-light, flex-free 7075 Alloy interchangeable axle configurations: Quick-Release, Bolt-On, and Thru-Axle. Easily serviced and made in sunny Chico, California, these hubs will last you a lifetime.
This hub spins very smoothly due to extremely high tolerance machined bearing bores (.0002", that’s 8 times thinner than a human hair!), high quality user-adjustable sealed cartridge bearings, and a hub shell design that has been refined over years of production and real world abuse to be as light as possible while still withstanding the abuse that the biggest, most reckless riders can put it through.$379.00 (RRP) -
Stock Code:PCRL-723BLACKStock Code:PCRL-723BLUEStock Code:PCRL-723GOLDStock Code:PCRL-723ORANGEStock Code:PCRL-723PEWTERStock Code:PCRL-723PINKStock Code:PCRL-723POLISHStock Code:PCRL-723PURPLEStock Code:PCRL-723REDStock Code:PCRL-723SILVERStock Code:PCRL-726BLACKStock Code:PCRL-726BLUEStock Code:PCRL-726GOLDStock Code:PCRL-726ORANGEStock Code:PCRL-726PEWTERStock Code:PCRL-726PINKStock Code:PCRL-726POLISHEDStock Code:PCRL-726PURPLEStock Code:PCRL-726REDStock Code:PCRL-726SILVER
Paul set out to make the toughest, most precisely machined, most adjustable dropper trigger on the market. After numerous prototypes and over a year of testing, they are proud to present a dropper trigger with stacked dual sealed cartridge bearings, two different cable clamp options, a barrel adjuster, and a hinged clamp.
- Machined by Paul in sunny Chico California to the highest tolerances.
- A pinch bolt and cable head recess allowing you to run the cable in either direction.
- Dual stacked sealed cartridge bearings in the pivot for zero slop and long (serviceable) life.
- A hinged clamp so you can install it without removing the grip.
- Barrel adjuster for fine tuning the cable tension.$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$306.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP)$306.00 (RRP)$225.00 (RRP)$225.00 (RRP)$225.00 (RRP) -
Stock Code:PCBR-041BLACK03Stock Code:PCBR-041SILVER03
The front Funky Monkey features an extra-long arm that drops down to prevent brake cable housing from bending too tightly and binding up. The arm sticks out far enough to clear most headsets.
This simple part is brought to a whole new level with Paul renowned machining prowess.$116.00 (RRP)$116.00 (RRP) -
Stock Code:PCBR-042BLACK01Stock Code:PCBR-042SILVER01
The rear Funky Monkey has a hinged arm to self-align for the proper cable angle to prevent brake cable housing from bending too tightly and binding up.
This simple part is brought to a whole new level with Paul renowned machining prowess.$145.00 (RRP)$145.00 (RRP) -
Stock Code:PCLT-350BLACKStock Code:PCLT-350BLUEStock Code:PCLT-350GOLDStock Code:PCLT-350ORANGEStock Code:PCLT-350PEWTERStock Code:PCLT-350PINKStock Code:PCLT-350POLISHStock Code:PCLT-350PURPLEStock Code:PCLT-350REDStock Code:PCLT-350SILVER
The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame.
By lowering the attachment point of your light, it casts its beam on the ground at a much shallower angle. This results in a lighting pattern that better reveals contours and hidden bumps in the road.$57.00 (RRP)$57.00 (RRP)$57.00 (RRP)$57.00 (RRP)$57.00 (RRP)$57.00 (RRP)$103.00 (RRP)$57.00 (RRP)$57.00 (RRP)$57.00 (RRP) -
Stock Code:PCBR-06005Stock Code:PCBR-06005BK
A pair of large aluminum barrel adjusters with lock nuts for all Love Levers or Canti Levers.
- Extruded American 6061 aluminum
- Quick and easy on-the-fly brake cable adjustments$77.00 (RRP)$77.00 (RRP) -
Stock Code:PCWH-100POLISH28Stock Code:PCWH-100BLACK32Stock Code:PCWH-100POLISH32Stock Code:PCWH-101POLISH32
The High Flange Front is a front hub with large diameter flanges that perfectly matches Pauls High Flange Rear track hub.
- Flanges have six window cutouts in them to save weight and draw on the influence of classic track hubs.
- 7075 aluminum axle, which has a great strength to weight ratio.
- Outer lock nut faces are made of knurled steel for a solid grip against dropouts.
- Enduro sealed bearings that can be adjusted with simple adjuster ring.$395.00 (RRP)$359.00 (RRP)$395.00 (RRP)$395.00 (RRP) -
Stock Code:PCWH-132BLACK32Stock Code:PCWH-132POLISH32
The High Flange Rear is a single speed hub with large diameter flanges.
- Flanges have six window cutouts in them to save weight and draw on the influence of classic track hubs.
- 7075 aluminum axle, which has a great strength to weight ratio.
- Axle ends are threaded to receive Paul stainless steel axle bolts.
- Outer lock nut faces are made of knurled steel for a solid grip against dropouts.$397.00 (RRP)$434.00 (RRP) -
Stock Code:PCWH-130POLISH28Stock Code:PCWH-120BLACK32Stock Code:PCWH-120POLISH32Stock Code:PCWH-130BLACK32Stock Code:PCWH-130POLISH32Stock Code:PCWH-130BLACK36
The High Flange Rear is a single speed hub with large diameter flanges.
- Flanges have six window cutouts in them to save weight and draw on the influence of classic track hubs.
- 7075 aluminum axle, which has a great strength to weight ratio.
- Axle ends are threaded to receive Paul stainless steel axle bolts.
- Outer lock nut faces are made of knurled steel for a solid grip against dropouts.$434.00 (RRP)$397.00 (RRP)$434.00 (RRP)$397.00 (RRP)$434.00 (RRP)$397.00 (RRP) -
Stock Code:PCBR-048FMBKCPStock Code:PCBR-048FMSICP
Three years of development and we think Paul nailed it, this is arguably the best mechanical caliper ever made for a bicycle. It’s available in Long Pull, Short Pull, and Campagnolo pull.
- Tried and true ball bearing in a ramp system.
- Bigger balls for smoothness and increased pad travel.
- Hardened the steel where the balls contact the ramps.
- Three hardened steel pins to locate the pad actuator.
- Added “fangs” to the inner backing plate for stiffness and beefed up outer caliper body.
As always, allow a couple short rides to bed in the pads. Around the 3rd ride, these brakes really start to BITE!$495.00 (RRP)$495.00 (RRP) -
Stock Code:PCBR-048FMBKLPStock Code:PCBR-048FMBKORLPStock Code:PCBR-048FMPOLP
Three years of development and we think Paul nailed it, this is arguably the best mechanical caliper ever made for a bicycle. It’s available in Long Pull, Short Pull, and Campagnolo pull.
- Tried and true ball bearing in a ramp system.
- Bigger balls for smoothness and increased pad travel.
- Hardened the steel where the balls contact the ramps.
- Three hardened steel pins to locate the pad actuator.
- Added “fangs” to the inner backing plate for stiffness and beefed up outer caliper body.
As always, allow a couple short rides to bed in the pads. Around the 3rd ride, these brakes really start to BITE!$495.00 (RRP)$495.00 (RRP)$641.00 (RRP) -
Stock Code:PCBR-048FMBKORSPStock Code:PCBR-048FMBKSPStock Code:PCBR-048FMPOSPStock Code:PCBR-048FMPUBKSPStock Code:PCBR-048FMPWBKSPStock Code:PCBR-048FMSIORSPStock Code:PCBR-048FMSISP
Three years of development and we think Paul nailed it, this is arguably the best mechanical caliper ever made for a bicycle. It’s available in Long Pull, Short Pull, and Campagnolo pull.
- Tried and true ball bearing in a ramp system.
- Bigger balls for smoothness and increased pad travel.
- Hardened the steel where the balls contact the ramps.
- Three hardened steel pins to locate the pad actuator.
- Added “fangs” to the inner backing plate for stiffness and beefed up outer caliper body.
As always, allow a couple short rides to bed in the pads. Around the 3rd ride, these brakes really start to BITE!$495.00 (RRP)$495.00 (RRP)$641.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP) -
Stock Code:PCBR-048BKLPStock Code:PCBR-048BKORLPStock Code:PCBR-048POLPStock Code:PCBR-048PUBKLPStock Code:PCBR-048PWBKLPStock Code:PCBR-048SILPStock Code:PCBR-048SIORLP
Three years of development and we think Paul nailed it, this is arguably the best mechanical caliper ever made for a bicycle. It’s available in Long Pull, Short Pull, and Campagnolo pull.
- Tried and true ball bearing in a ramp system.
- Bigger balls for smoothness and increased pad travel.
- Hardened the steel where the balls contact the ramps.
- Three hardened steel pins to locate the pad actuator.
- Added “fangs” to the inner backing plate for stiffness and beefed up outer caliper body.
As always, allow a couple short rides to bed in the pads. Around the 3rd ride, these brakes really start to BITE!$495.00 (RRP)$495.00 (RRP)$641.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP) -
Stock Code:PCBR-048BKORSPStock Code:PCBR-048BKSPStock Code:PCBR-048POSPStock Code:PCBR-048PUBKSPStock Code:PCBR-048PWBKSPStock Code:PCBR-048SIORSPStock Code:PCBR-048SISP
Three years of development and we think Paul nailed it, this is arguably the best mechanical caliper ever made for a bicycle. It’s available in Long Pull, Short Pull, and Campagnolo pull.
- Tried and true ball bearing in a ramp system.
- Bigger balls for smoothness and increased pad travel.
- Hardened the steel where the balls contact the ramps.
- Three hardened steel pins to locate the pad actuator.
- Added “fangs” to the inner backing plate for stiffness and beefed up outer caliper body.
As always, allow a couple short rides to bed in the pads. Around the 3rd ride, these brakes really start to BITE!$495.00 (RRP)$495.00 (RRP)$641.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP)$495.00 (RRP) -
Stock Code:PCST-390BLACKStock Code:PCST-390BLUEStock Code:PCST-390GOLDStock Code:PCST-390GREENStock Code:PCST-390ORANGEStock Code:PCST-390PEWTERStock Code:PCST-390PINKStock Code:PCST-390POLISHStock Code:PCST-390PURPLEStock Code:PCST-390REDStock Code:PCST-390SILVER
Paul thought it would be fun to make a stem topcap that looks like the pad adjuster of the Klamper Disk Brakes, so you can really tie the room together when you have a bike with Klampers and a Boxcar Stem.
Machined by Paul in sunny Chico California.$48.00 (RRP)$48.00 (RRP)$48.00 (RRP)$48.00 (RRP)$48.00 (RRP)$48.00 (RRP)$48.00 (RRP)$77.00 (RRP)$48.00 (RRP)$48.00 (RRP)$48.00 (RRP) -
Stock Code:PCXT-753$27.00 (RRP)
-
Stock Code:PCCL-ACCE0010
Be like a biker! Be like a pirate! Be like a punk rocker!!!!
Or, cover up that embarrassing crotch split in your jeans.
Three inches diameter, classic black and white, all-embroidered, proudly made in the US of A by Falls Creek Outfitters$15.00 (RRP)Add To Cart
-
Stock Code:PCBR-065BLACKStock Code:PCBR-065PEWTERStock Code:PCBR-065POLISHStock Code:PCBR-065PURPLEStock Code:PCBR-065SILVER
The Love Lever 2.5 is a lightweight long-pull brake lever designed for comfortable three-finger operation.
Dual sealed-cartridge bearings provide maximum power and rigidity with zero slop, while the reach adjustment screw and oversized barrel adjuster allow you to easily dial in ergonomics.
Machined to the highest tolerances in Chico California.$405.00 (RRP)$405.00 (RRP)$507.00 (RRP)$405.00 (RRP)$405.00 (RRP) -
Stock Code:PCBR-060BLACKStock Code:PCBR-060PEWTERStock Code:PCBR-060POLISHStock Code:PCBR-060PURPLEStock Code:PCBR-060SILVER
The Compact Love Lever is a lightweight long-pull brake lever designed for comfortable two-finger operation.
Dual sealed-cartridge bearings provide maximum power and rigidity with zero slop, while the reach adjustment screw and oversized barrel adjuster allow you to easily dial in ergonomics.
Machined to the highest tolerances in Chico California.$405.00 (RRP)$405.00 (RRP)$507.00 (RRP)$405.00 (RRP)$405.00 (RRP)
