Wheels MFG Bottom Bracket Gauge
Description
The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration. The gauge can measure:
bottom bracket width
bottom bracket shell inner diameter
crank spindle length
crank spindle diameter
bearing inner diameter
A metric scale runs along the long edges for measuring bottom bracket shell width and crank spindle lengths. Durable red anodized aluminum with laser etching.
Overall size 7" x 3" x 0.125".
Webshops and Bike shops
You may also be interested in...
-
Stock Code:CKTL-TBB007
The Chris King® Bottom Bracket External Cup Tool is anodized aluminum and features a 3/8" socket drive. Ahigh-quality torque wrench is recommended for installation. The spline interface on the reverse side perfectly matches the Chris King® Bottom Bracket cups to ensure a secure fit during installation while preventing damage to the finish of the bracket.
For use with Chris King Threadfit T47 30i and 24i Bottom Brackets.Expected Date:06 June 2024$90.00 (RRP) -
Stock Code:WMTL-24X37-EXT
Individual extractor for removing 24x37 sealed bearings with 24mm inside diameter.
These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.
All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor. If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.$49.35 (RRP)Add To Cart
-
Stock Code:WMTL-BP0018
Thin Flange Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. This single-sided socket is used for installing and removing 48.5mm, 16-notch bottom bracket cups. The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets. Machined 6061 Aluminum Anodized Red.
$84.00 (RRP)Add To Cart
-
Stock Code:WMTL-BP0023
Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. This single-sided socket is used for installing and removing 44mm, 16-notch bottom bracket cups. The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets. Machined 6061 Aluminum Anodized Red
- 44mm
- 16 Notch
- 6061 Aluminum$85.00 (RRP)Add To Cart
-
Stock Code:BTTL-100000212$58.00 (RRP)
Add To Cart
