Wheels MFG T47 BB SRAM Black
Description
T47 threaded BB cups for T47 frames and 22/24mm spindle diameter SRAM GXP cranks. Cups have internal bearings, and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
Bottom Bracket Includes:
BB Cups with bearings
2 - Silicone dust seals
2 - 0.5mm crank spindle spacers
2 - 1.0mm crank spindle spacers
1 - 24mm ID wave washer
Bearings: Enduro ABEC-3
Bottom Bracket/Frame Interface: T47
Bottom Bracket Shell Width (mm): 68mm - 132mm
Bottom Bracket Shell I.D.: 47x1.0mm Threaded
Crank Spindle Diameter: 22/24mm
Over Bearing Width: 91.7mm in 86.5mm wide shell*
Tool Pattern: 48.5mm x 16-notch
Webshops and Bike shops
You may also be interested in...
-
Stock Code:WMBB-386EVOBB-SRAMACStock Code:WMBB-386EVOBB-SRAMBBStock Code:WMBB-386EVOBB-SHIMStock Code:WMBB-386EVO-BBStock Code:WMBB-386EVO-BB-ACStock Code:WMBB-386EVO-CER-ZEROStock Code:WMBB-386EVO-BB29MMStock Code:WMBB-386EVOBB-PRXStock Code:WMBB-386EVOBB-SHIMAC
Threaded BB for 386EVO frames. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance.
No more creaking. Smooth operation. Fast bearing replacement.
** Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29).**
Bearings: Enduro ABEC-3
Bottom Bracket/Frame Interface: BB386EVO
Bottom Bracket Shell Width (mm): 86.5mm
Bottom Bracket Shell I.D.: 46mm
Crank Spindle Diameter: 30mm
Weight: 126g
*Will accept 24mm and 24/22mm cranksets using Wheels Mfg. 386EVO BB / Crank Adapters$219.00 (RRP)$203.00 (RRP)$216.00 (RRP)$202.00 (RRP)$219.00 (RRP)$445.00 (RRP)$204.00 (RRP)$203.00 (RRP)$218.00 (RRP) -
Stock Code:WMBB-BB30-30-5MMStock Code:WMBB-BB30-30-10MM
Used to adjust crank chainline or take up any slack when using 30mm spindle cranks.
Inner Diameter: 30mm
Outer Diameter: 41.5mm
Thickness: 10mm
Sold Individually$13.00 (RRP)$17.00 (RRP) -
Stock Code:CKBB-AAB1Stock Code:CKBB-AAR1Stock Code:CKBB-AAS1Stock Code:CKBB-AAT2Stock Code:CKBB-AAY1Stock Code:CKBB-AABFStock Code:CKBB-AAB2Stock Code:CKBB-AAM2Stock Code:CKBB-AAP1Stock Code:CKBB-AAZ2Stock Code:CKBB-AAG2
REQUIRES A CHRIS KING THREADFIT24 FIT KIT
ThreadFit™ 24 fits 24mm cranks in 68mm BB shells.
Our ThreadFit™ 24 bottom bracket is designed and built to be durable, serviceable, and silent. Manufactured to create the most precise interface between your frame’s bottom bracket shell and your cranks, it makes your cranks spin lightly and easily, without interference, for the lifetime of your bike (with a little regular service). King’s legendary, angular-contact bearings, both steel and ceramic, are the best in the industry, and actually get faster over time, as their contact surfaces wear.
You want this bottom bracket because it offers super low drag. You want this bottom bracket, because it can be opened, cleaned and repacked for years of faithful service. You want this bottom bracket, because you don’t want to think an awful lot about your bottom bracket.
- Engineered, manufactured and assembled in Portland, Oregon USA
- King Lifetime Warranty
- Legendary made-in-house bearings
- A Fit Kit is required for use$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP)$349.00 (RRP) -
Stock Code:CKBB-PBB085
Chris King bottom brackets utilize Fit Kits to ensure that cranks mate perfectly with our precision bearings, extend product life, and reduce the potential for noise. Fit Kits will also allow you to use one bottom bracket with a wide array of cranks, if you happen to change you cranks in the future.
Fit Kit #5 (PBB085) for ThreadFit™ T47 30x and T47 30i with 30mm spindle cranksets.
For use with ThreadFit™ T47 30x and T47 30i
68mm, 73mm BB shells.
Common Cranks: White Industries, SRAM, Race Face$43.50 (RRP)Add To Cart
-
Stock Code:WMBB-BB-MTB-7Stock Code:WMBB-BB-MTB-9Stock Code:WMBB-BB-MTB-1Stock Code:WMBB-BB-MTB-3Stock Code:WMBB-BB-MTB-1-1Stock Code:WMBB-BB-MTB-1-3Stock Code:WMBB-BB-MTB-1-6Stock Code:WMBB-BB-MTB-1-7Stock Code:WMBB-BB-MTB-1-5Stock Code:WMBB-BB-BSA29-BBStock Code:WMBB-BB-BSA29-BB-1Stock Code:WMBB-BB-BSA29-BB-3Stock Code:WMBB-BB-BSA29-BB-4Stock Code:WMBB-BB-BSA29-BB-5Stock Code:WMBB-BB-BSA29-BB-6Stock Code:WMBB-BB-BSA29-BB-7Stock Code:WMBB-BB-BSA29-BB-9Stock Code:WMBB-BB-BSA30-ACStock Code:WMBB-BB-BSA30-BBStock Code:WMBB-BB-BSA30-CERStock Code:WMBB-BB-BSA30-BB-12
Our solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 Angular Contact sealed bearings outboard of the BB shell. Fully serviceable.
Notes:
*For use with BB30 WIDE 30mm diameter cranks with a spindle length of at least 104mm (BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide).
*Will not work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH!
*Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29).$172.00 (RRP)$211.00 (RRP)$172.00 (RRP)$212.00 (RRP)$172.00 (RRP)$172.00 (RRP)$172.00 (RRP)$172.00 (RRP)$172.00 (RRP)$210.00 (RRP)$211.00 (RRP)$211.00 (RRP)$211.00 (RRP)$211.00 (RRP)$211.00 (RRP)$211.00 (RRP)$211.00 (RRP)$212.00 (RRP)$172.00 (RRP)$472.00 (RRP)$172.00 (RRP)
